WolfPack HDTV444K60 User manual

1
WolfPack 4K60 18Gbps 4X4 Seamless HDMI Matrix
with Video Wall &Multiviewer&Scaling and APP&IR&IP&RS-232
HDTV444K60
Version: V23.3.24
User Manual

2
Safety Reminder
To protect the device and operating personnel from electrostatic discharge, you need to check and
ensure that the device is grounding well before the device is powered on. Please observe the
following when you install, use, maintain this equipment.
Make sure the device ground connection.
Disposal Instruction (US)
For better protection of our earth, please don't throw this electronic device into municipal trash bin when
discarding.
To minimize pollution and ensure utmost protection of the global environment, please recycle the product. For
more
information about the collection and recycling of Waste Electrical and Electronic Equipment (WEEE), please
contact your local dealers.
Safety Instructions
1. Please read these safety instructions carefully.
2. Please keep this User Manual for later reference.
3. Please disconnect this equipment from connecter before cleaning. Don’t use liquid or prayed detergent for
cleaning. Use moisture sheet or cloth for cleaning.
4. Make sure the equipment is connected to the power source with the correct voltage, frequency, and ampere.
5. All cautions and warnings on the equipment should be noted.
6. Never pour any liquid into opening, this could cause fire or electrical shock.
7. Never open the equipment. For safety reason, the equipment should only be opened by qualified service
personnel.
8. If one of the following situations arises, get the equipment checked by a service personnel :
a. Liquid has penetrated into the equipment.
b. The equipment has been exposed to moisture.
c. The equipment has not work well or you can not get it work according to user’s manual.
d. The equipment has dropped and damaged.
e. If the equipment has obvious sign of breakage.
9. Ambient operation temperature: 0 ~ 45 degrees.
10. Risk of overheating! Don’t put operating/installing equipment inside too closed space, be sure the
installation space at least 1 to 2 inches or 2 to 5 cm of space for ventilation. To ensure that other objects do not
cover the equipment.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals,player, etc.) certified to comply with Class B limits may be
attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and
TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is
granted by the Federal Communications Commission, to operate this equipment.

3
Contents
1. Product Introduction ....................................................................................................4
2. Product Features ..........................................................................................................4
3. Technical Datasheet ..................................................................................................... 5
4. Packing Datials ............................................................................................................ 5
5. Panel diagram ............................................................................................................. 5
6. Product Connection Diagram ........................................................................................ 7
7. Product Operation and Instruction ................................................................................ 6
7.1 Front Panel Switching Operation ................................................................................6
7.2 WEB Control ..............................................................................................................24
7.3 APP Control ...............................................................................................................26
7.4 IR Remote Control.......................................................................................................28
7.5 COM Control Commands............................................................................................29
8. Trouble Shooting and Attention ...................................................................................32
9. After Sales .................................................................................................................32
9.1 Warranty.....................................................................................................................32
9.2 limitation and Exception ...........................................................................................32

4
1. Product Introduction
This is advanced and powerful 4K60 18Gbps HDMI2.0 Matrix Switcher with 4 HDMI inputs and
4*HDMI Outputs. This unit can support seamless switching, video wall, multi-viewer and Scaler
functions. It can be controlled by the front push-button, IR remote, TCP/IP WEB GUI or APP
control, also support the RS232 control. It also support 4*3.5MM audio inputs and 4*3.5mm
audio outs or 4*SPIF audio outs, it’s capable of producing high-quality imagery with pristine
detailing and rich color, all HDMI ports on this unit are HDCP 2.2 compliant. This device also
supports analog audio extraction, and audio channels can be switched independently.
2. Product Features
4*HDMI2.0 with 4*3.5mm audio Inputs
4*HDMI2.0 with 4*3.5mm audio and 4*SPDIF Outputs.
Seamless switching
Supports Matrix switching, Video Wall and multiview function
Supports audio independently switching
Compliant HDCP 2.2 with EDID management
Control by front-panel push buttons, IR Remote, RS232, TCP/IP and APP
Resolution up to 4K@60Hz 4:4:4
3. Technical Datasheet
Name
4K60 18Gbps 4X4 Seamless HDMI Matrix with Video
Resolution
4K@60Hz,YUV4:4:4 8 bit, 4K@30Hz/1080P/1080i/720P
Input ports
4*HDMI2.0 with 4*3.5mm
Output ports
4*HDMI2.0 with 4*3.5mm audio and 4*SPDIF
Transmission distance
10m/30ft for 4K60, 15m/45ft for 1080P@60Hz(by qualified
Bandwidth
18Gbps
HDCP Compliant
HDCP 2.2 and HDCP 1.4
Controlling
Front-panel push buttons, IR Remote, RS232, TCP/IP and APP
Power Consumption
22W(Max.)
Dimension(mm)
486 * 279 * 44( mm)
Weight
6Kg
Operating
Temperature
-5 to +40°C(23 to +104 °F)
Storage Temperature
-10 to +60°C(-14 to +140 °F)

5
4. Packing Details
Matrix switch ....................................................................................................1 unit
Power cord ...........................................................................................................1 pcs
User manual .........................................................................................................1 pcs
Rack ears ...............................................................................................................1 pair
5. Panels
Front Panel
Name
Description
LCD Screen
Operation information real-time Display
POWER
light up after power on, it will light off after power off
IR
IR remote control
OUTPUT
4 output buttons
INPUT
4 input buttons
CONTROL
MODE
For the pre-built presets recall
MENU
For the main settings
UP
Up selection button
DOWN
Down selection button
LOCK
Long-press to lock or unlock push buttons
ENTER
Enter button
Rear Panel:
Name
Description
AUDIO IN
4* 3.5mm Analog audio inputs
INPUT
4* HDMI inputs
AUDIO OUT
4* 3.5mm Analog audio outputs
OUTPUT
4* HDMI Outputs
SPDIF
4* SPDIF outputs
RS232
3-PIN RS232 control port
IR IN
For IR extension
LAN
For the WEB GUI, RS232, TCP/IP control
DC 12V
DC 12V power supply
6. Equipment Connection Diagram

6
7. Equipment Operation and Instruction
The LCD display screen will light up after power and turned on. It shows the current operation
status, press MENU button, it will keep recycling between VIEW, SWITCH, SCENE, SETUP four
different interface. The default interface is VIEW.
7.1 Front push-button control
7.1.1 MENU>OUTPUT
MENU>OUTPUT>Output 1

7
MENU>OUTPUT>Output 1>Control>Video
to setup the output video, including video ON/OFF, switch, test pattern

8
Format: to setup the output video format, resolution, color space
Default 1: 4K@60
Default 2: 4K@30
Default 3: 1080P@60hz
Default 4: 720P@60hz

9
Coord: to crop the output image
It will including Crop, Zoom, Offset and Gap.
Crop and Zoom image cropping or zooming
Crop start from: CropX0=0, CropY0=0; Crop ends with: CropY1=6000, CropX1=6000.

10
Zoom start from: ZoomX0=0, ZoomY0=0; Zoom ends with: ZoomX1=6000, ZoomY1=6000
Offset and Gap are for the video wall bezel corrections
Offset: Offeset U=0, Offeset D=0, Offeset L=0, Offeset R=0
Gap: GapX=0, GapY=0
PIP: when output is multiview to adjust the layer
Wall: to set up video wall mode

11
Rotate: only for OUTPUT1 with any degrees rotation
Image: for output image hue, brightness settings
MENU>OUTPUT>Output 1>Audio

12
HDMI Onoff: HDMI Audo ON/OFF
HDMI SRC: switch to different audio inputs
DEC Onoff: De-embedded audio ON/OFF
DEC SRC: De-embedded audio switching

13
MENU>OUTPUT>Output 1>Power
For the HDMI 5V ON/OFF
7.1.1 MENU>INPUT
MENU>INPUT>Input

14
MENU>INPUT>EDID

15
7.1.3 MENU>SETUP
MENU>SETUP>Network

16
MENU>SETUP>RS232
MENU>SETUP>LCD

17
MENU>SETUP>OSD
MENU>SETUP>Menu
Timer for Menu to back the channel time

18
Disable means need to press Enter or OK to take action
Enable means need need to press Enter or OK to run
MENU>SETUP>User EDID
MENU>SETUP>System

19
Timed off for set a time to off the matrix, default with endlessness
Timed on for set a time to start the matrix, default with endlessness
Auto sleep means for auto sleep
MENU>SETUP>System
7.1.4 MENU>Preset

20