WolfPack HDTVFIX1616-HDR User manual

1
Version: V22.10.13
User Manual
HDTVFIX1616-HDR
WolfPack 4K 60 Hz16x16 HDMI Matrix Switch with HDR

2
Contents
1. Product Introduction ....................................................................................................4
2. Product Features ..........................................................................................................4
3. Technical Datasheet ..................................................................................................... 5
4. Packing Datials ............................................................................................................ 5
5. Panel diagram ............................................................................................................. 5
6. Product Connection Diagram ........................................................................................ 7
7. Product Operation and Instruction ................................................................................ 7
7.1 Front Panel Switching Operation ................................................................................7
7.1.1 Switch ...............................................................................................................7
7.1.2 Scene ................................................................................................................7
7.1.3 Set Up.................................................................................................................8
7.1.4 View ..................................................................................................................8
7.2 WEB Control ................................................................................................................8
7.2.1 Login .................................................................................................................8
7.2.2 Switch ...............................................................................................................8
7.2.3 Scene ................................................................................................................9
7.2.4 Caption .............................................................................................................8
7.2.5 Manager Control ............................................................................................ 10
7.2.6 Set Up ...............................................................................................................9
7.2.7 Upgrade ..........................................................................................................10
7.3 APP Control .................................................................................................................8
7.4 COM Control Commands............................................................................................12
8. IR Remote control ...................................................................................................... 13
9. Trouble Shooting and Attention ...................................................................................14
10. After Sales ............................................................................................................... 14
10.1 Warranty...................................................................................................................14
10.2 limitation and Exception .........................................................................................14

3
1. Product Introduction
audio in and 16 HDMI output ports with 16* 3.5mm audio outs, the resolution can up to
4K60Hz and all ports are HDCP compliant. With the friendly user control methods: IR remote
control, 2-key push front buttons with background blue light, WEB GUI, TCP/IP, RS232,UDP
and the iOS/Android APP control, supports EDID management by the DIP switches, this matrix
switcher can work with the Blu-Ray Players, Set-Top boxes, Home Theater, and game consoles
etc HDMI input sources to route to the HDMI displays, it has been widely used in different
audio visual applications.
2. Product Features
8 HDMI inputs with 8 audio in and 8 HDMI outputs with 8 audio outs
Supports HDMI2.0, HDCP compliant
The resolution can up to 4K@60Hz
Deep Color support 48/36/30/24-bit
Supports LPCM 7.1CH, Dolby Digital and DTS-HD Master Audio
Supports EDID management by DIP switch
Supports RS-232, UPD(4000) and TCP/IP(5000) Control protocols
Supports 2-press push buttons control with blue lights
Supports WEB GUI, APP, RS232, push-button, IR remote controls
3. Technical Datasheet
Description
Input
16*HDMI, 16*3.5mm audio, 2*RS232, 2*LAN
Input
16*HDMI, 16*3.5mm audio
Control ports
RS-232, UPD(4000) and TCP/IP(5000) Control protocols
Resolution
480i, 576i, 480p, 576p, 720p, 1080i, 1080p@24/30/50/60Hz, 4K@30Hz, 4K@60Hz
Color Space
Support RGB444, YUV444, YUV422 , x.v.C standard color extension
Control
iOS/Android Apps, WEB GUI, RS232 & Front buttons with background light
Power
AC: 100V—240V 50/60Hz
Consumption
20W
Dimension
3U, 482*280*133(mm)
Weight
9kg
Work Temperature
0℃~40℃
Storage Temperature
-20℃~55℃
WolfPack 4K 60 Hz 16x16 HDMIMatrix Switch with HDR
This is aWolfPack4K60 Hz 16x16HDMI MatrixSwitch withHDRw/16 HDMI inports w/16* 3.5mm

4
4. Packing Details
HDMI2.0 16x16 Matrix Switcher ....................................................................................1 unit
Power cord ...........................................................................................................1 pcs
IR Remote control..................................................................................................1 pcs
5. Panels
Front Panel
No.
Name
Description
①
LCD Screen
Operation information real-time Display
②
POWER
light up after power on, it will light off after power off
②
ACTIVE
Flashing while using the buttons/ WEB switching successfully
②
NETWORK
Network control indicator. The Network indicator blinks every time you perform an
operation on the WEB page
③
IR
IR remote control
④
CONTROL
MENU
Select between View, Switch, Scene Save/ Recall and Setup
UP
Upward and short cut button for switching to ALL outputs
SAVE
For saving the scene or setup
ENTER
Enter button
DOWN
Downward and short cut button for canceling to ALL outputs
RECALL
For recalling the saved scene
⑥
INPUT
Output buttons with background light, from 1~16 output buttons
⑥
OUTPUT
Input buttons with background light, from 1~16 input buttons
Rear Panel:

5
No.
Name
Description
①
Input Port
1-16 HDMI input ports
②
Output Port
1-16 HDMI output ports
③
RS232 Ports
Dual RS232 ports for 3rd parties control
④
LAN Ports
Dual LAN ports for WEB/TCP/IP control
⑤
RS232 Ports
Dual RS232 ports for 3rd parties control
⑥
LAN Ports
Dual LAN ports for WEB/TCP/IP control
⑦
Power Port
AC 220V-240V 50/60Hz
⑦
Power Switch
Power ON/OFF switch with light
⑧
Grounding
Grounding port
DIP switch for inputs:
EDID management
Audio
D1
D2
D3
Function
D4
Function
1
1
1
4k60
1
3.5MM
1
0
0
1080P2.1
0
HDMI
1
0
1
HDMI-1200
0
1
1
1440*900
0
0
1
DVI-1080
0
1
0
DVI-1200
1
1
0
4k2.1
0
0
0
External EDID
DIP switch for outputs:
Resolution Scaling
No functions
D1
D2
Function
D3
D4
0
0
Resolution bypass
No functions
0
1
Force the 4K30/50/60 resolution to 1080P30/50/60
1
0
Force 4K50/60 420 resolution to 4K50/60 444
1
1
Resolution bypass

6
6. Equipment Connection Diagram
7. Equipment Operation and Instruction
The LCD display screen will light up after power and turned on. It shows the current operation
status, press MENU button, it will keep recycling between VIEW, SWITCH, SCENE, SETUP four
different interface. The default interface is VIEW.
7.1 Font buttons switching operation
7.1.1 Switching operation
Switching with industry 2-key fast switching, first press the input button and then select/press
output button. Details are as follow:
There are 16 input buttons, 16 output buttons. First press MENU to show SWITCH
interface, then can continue the next switching step
Press input number at the INPUT area, the input button will light up with blue light
Then press output number at the OUTPUT area, and the output button will light up.
Users also can press the UP button to realize 1 to ALL switching.
If need to cancel switching, can press the button again to cancel. Users also can press
the DOWN button to cancel all outputs
7.1.2 Scene Operation
The system can save 40 scenes, after switching successfully in the SWITCH interface,
press MENU button and switch to SCENE interface.
Enter the wanted scene save number(1~16), then press SAVE. If want to reload the
saved scene, press the scene number and press RECALL button
Note: When the scene save/recall is made through the front button, the maximum
number of save/recall is 16.
7.1.3 Setup Operation
First press MENU switch to SETUP interface, then continue next operation
Via SETUP, it can realize IP address changing, in SETUP interface can use UP/ DOWN
button to position, enter the needed IP address from the left button side, then press
SAVE button to save

7
7.1.4 View Operation
Via MENU button switch to VIEW interface, will display the current switching status
7.2 WEB Control
The default IP address are 192.168.0.80(LAN1) and 192.168.1.80(LAN2).
7.2.1 Login Operation
Accordingly to connected LAN port, enter the corresponding IP address, if using the LAN2, then
enter 192.168.1.80 in the browse(Recommend with Google Chrome) as below:
Note: The default user name and password is the same: admin, click login after entering. Please
make sure the control PC is at the same IP segment.
7.2.2 Switch
Switch interface:
All input and output ports can be renamed,Multi-function buttons area, through simple Settings,
can be controlled through the serial port peripheral devices, such as projector switch. No setting
is the scene call shortcut button.
Users can do the input sources switching by clicking the Input buttons first, then pressing the

8
Output buttons.
Or users can use the shortcut buttons on the right for the fast switching:
Switch one input to all the outputs
Close one input to all the outputs
Switch all inputs on all outputs
Close all inputs to all outputs
Switch to the scenes Save and Recall interface
7.2.3 Scene
Scene Interface:
It can support 40 scenes in total, users can preview each scene switching status by clicking on any
of the scene number. Click “Save” to save the switching status, and “Load” to recall the scenes.
“Back” to return back to the switch interface. All scenes support to be renamed.
7.2.4 Caption:
For changing the input, output and scenes’ name
Users can rename the scenes, input and output names here, users can change all the names and
then need to click the “Save” button on the right. After renamed the names, users will see the
input, output and the scenes names have changed once click to the “Switch” and “Scenes”
interface. With this renaming function, it can be easier for the users to know the sources and
ends.

9
7.2.5 Setup
Setup interface:
Users can reboot, change the IP address, set up the login user names, language and the RS232
baud rate settings here. After changed the IP address, will need to reboot the matrix switcher,
then the new IP address will take effect.

10
7.2.6 More:
For the more interface, users mainly can do the firmware upgrade here.
Screen is for the other matrix models which with the touch screen, so users can monitor the
touch screen switching status.
For the upgrade, users need to check with the factory to get the firmwares, the firmware is “.zip”
format.
License and Debug is for factory engineering team to have the technical support.
7.2.7 Manager
This Manager interface, it allows the users to manage at most 254 units of the matrices which are
installed at the same area network and at the same gateway but different IP addresses. As below
are showing 3 matrices, users can rename each matrix and click button to do the switching or
open in a new manage window.
7.3 APP Control
The matrix switchers also can support the iOS and Android APP control, users can search the
keyword “Matrix Control System” in Apple store or the Google Play Store.

11
Step 1: Make sure the matrix well connected with the WIFI router, and the iPad/Android
devices are connected to this same WIFI. Then open on the MCS(matrix control system) APP
and Enter the IP address of the matrix switcher(the default IP addresses are: 192.168.0.80 or
192.168.1.80):
Step 2: After Enter the IP address, it will need to login, the default user name and password
both are the admin:

12
Step 3: After log in successfully, users can do the same functions as the WEB GUI operation:
7.4 COM Control Commands
RS232 cable with straight-through connection(USB-RS232 can be used directly to control)
Communication protocol:
Baud rate: 115200
Data bit: 8
Stop bit: 1
Check bit: None
Commands
Explanation
Function description
YAll.
Y=1,2,3,4......
Switch Input Y to all the outputs
Eg. “1ALL.” means switch input 1 to all outputs
All1.
One to one
Switch all the channels to be one to one. Eg.1->1,
2->2, 3->3……
YXZ.
Y=1,2,3,4......
Z=1,2,3,4......
Switch Input Y to Output Z
Eg. “1X2.” means switch Input 1 to output 2
YXZ&Q&W.
Y=1,2,3,4......
Z=1,2,3,4......
Q=1,2,3,4......
W=1,2,3,4......
Switch Input Y to Output Z, Q, W
Eg. “1X2&3&4.” means switch Input 1 to Output 2,
3, 4

13
SaveY.
Y=1,2,3,4......
Save current status to scene Y
Eg. “Save2.” means saving current status to Scene 2
RecallY.
Y=1,2,3,4......
Recall the saved scene Y
Eg. “Recall2.” means recall the saved Scene 2
BeepON.
Beep sound
Buzzer on
BeepOFF.
Buzzer off
Y?.
Y=1,2,3,4.......
Check the Input Y to outputs switching status
Eg. “1?.” means to check Input 1 switching status
Note:
Every command ends with a period “.” and it can’t be missing.
The letter can be capital or small letter.
Switch success will return as “OK”, and failed will return as “ERR”.
8. Remote Control
9. Trouble Shooting and Attention
No signal on the display?
Make sure all the power code well connected
Check the display switcher and make sure it’s in good condition
Make sure the the DVI cable between the device and display are short than 7 meters
Reconnect the DVI cable and restart the system
Make sure the signal sources are on
Check the cables between the devices and displays are connected correctly.
Dial the switcher 7 to 1, then dial the switcher1,2 and choose the corresponding inputs.
Make sure the resolution less than WUXGA(1920*1200)/ 60HZ
Make sure the display can support the output resolution.
10. After Sales
9.1 Warranty Information
The Company warrants that the process and materials of the product are not defective
under normal use and service for 2 (2) year following the date of purchase from the
Company or its authorized distributors.
If the product does not work within the guaranteed warranty period, the company will

14
choose and pay for the repair of the defective product or component, the delivery of the
equivalent product or component to the user for replacement of the defective item, or
refund the payment which users have made.
The replaced product will become the property of the Company.
The replacement product could be new or repaired.
Whichever is longer, any replacement or repaired of the product or component is for a
period of ninety (90) days or the remaining period of the initial warranty. The Company shall
not be responsible for any software, firmware, information, or memory data contained in,
stored in, or integrated with the product repaired by the customer's return, whether or not
during the warranty period.
9.2 Warranty limitations and exceptions
Except above limited warranty, if the product is damaged by over usage, incorrectly use,
ignore, accident, unusual physical pressure or voltage, unauthorized modification, alteration
or services rendered by someone other than the Company or its authorized agent, the
company will not have to bear additional obligations. Except using the product properly in
the proper application or normal usage