Woodbridge T-0047 Assembly instructions

R
R
R
GE
R
WOODBRIDGE
W
R
GE
R
WOODBRIDGE
W
G
WOODBRIDG
W
20200818 REV. 1
R
WOODBRIDGE
INSTALLATION AND CARE GUIDE
LISTED
TM
ICC
á8QLIRUP3OXPELQJ&RGH83&
á,QWHUQDWLRQDO3OXPELQJ&RGH,3&
á:DWHU6HQVH&HUWLILHG7RLOHW
á&6$%,$302=3ODVWLF3OXPELQJ)L[WXUHV
®
®
®
SCC Accredited
CB-P/S
OCPS
Accrédité CCN
ANSI
ACCREDITED
ISO/IEC 17065
Product Certification Body
#1000
www.woodbridgebath.com
&RPSOLDQFHZLWKWKHIROORZLQJ3OXPELQJ&RGHV6WDQGDUGV
7RLOHW%LGHW6HDW
&XVWRPHU6HUYLFH3KRQH0RQGD\)ULGD\$0303DFLILF7LPH
2U(PDLOKHOS#ZRRGEULGJHEDWKFRP

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
TOILET COMPONENTS
1
Wax Ring x1
Washers x2
Nuts x2
Closet
Bolts x2
3đ£3;,
or Blanket Silicone Silicone/ Caulk Gun
27+(5722/60$<%(5(48,5('
Tape
Measure Pencil/Marker Safety Glass Knife
'XULQJXQSDFNLQJWKHSURGXFWDQGSULRUWRLQVWDOODWLRQLQVSHFW\RXUQHZSURGXFWIRUDQ\GDPDJHVRU
PLVVLQJSDUWV'RQRWDWWHPSWWRLQVWDOORURSHUDWHWKHSURGXFWLIWKHSURGXFWLVGDPDJHG
Adjustable
Wrench Channel Lock Pliers Adjustable Socket Extension Philips
Screwdriver Level <ħ@2-('
READALLINSTRUCTIONSBEFOREUNPACKINGTHEPRODUCT
3(23/($5(5(48,5('72/,)7$1''85,1*
(17,5(,167$//$7,212)7+,6352'8&7
,167$//$7,212)THIS352'8&76%<$1
,1(;3(5,(1&(',167$//(50$<5(68/7
3(5621$/,1-85<25'($7+
,16758&7,2167+$7,),*125('&28/'5(68/7,1'($7+256(5,286,1-85<&$86('%<,1&255(&7+$1'/,1*
25,167$//$7,212)7+(352'8&77+(6(,16758&7,2160867%(2%6(59(')256$)(,167$//$7,21
We8'9'8='9;,'8-+,;;3$,!2+'T<6&!;'T13&-(@T!£;'8T8'&'9-+2;,-91!2<!£c683&<$;38-;963£-$-'9>-;,3<;68-3823ধ$'R
We
VKDOOQRWEHOLDEOHIRUDQ\LQMXULHVRUSURSHUW\GDPDJHVLQFRQQHFWLRQZLWKWKLVSURGXFWGXULQJLQVWDOODWLRQRUXVHRIWKLVSURGXFW
Thisproductsmust beinstalledbya fullyinsuredand licensedplumberonly. Installationofanyour productbyanyoneother
thanfullyinsured andlicensedplumber shallvoidlimitedwarranty.Werecommendsthat suchlicensedplumber haveexperience
intheinstallation ofproducts.
Limitedwarrantyisvoidonanycommercialinstallation
Wearenotresponsible forlocalcode complianceforthis product.Buildingand plumbingcodesmayvary fromstate-to-statein
accordancetoyourlocation. Wearenotresonsible forprovidinganycompliancecertifications.
Undernocircumstances will we beliablefor anyandallincidental damagessustainedin connectionwiththis product
Neithermanufacture,nor distributor,norretailer isresponsiblefor waterdamageor floodcauseddue touseof thisproduct.
Undernocircumstances will we beliablefor anyandallfees, costofinstallation/reinstallation/removal,subsequent
damageortransportationincaseof theproductdefect
TOOLS REQUIRED FOR INSTALLATION
R
WOODBRIDGE
www.woodbridgebath.com
Toilet Template x1
Hand Wrench x1
Bidet Seat X1
One Pcs Toilet X1

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
2
DIMENSIONS/TECHNICALDATA
R
WOODBRIDGE
IMPORTANT INFORMATION
jMeasurements are ± c¥z!2&9<#/'$;;3$,!2+'>-;,3<;23ধ$'
j6'$-)$!ধ329{32)+<8!ধ329!8'9<#/'$;;3$,!2+'>-;,3<;23ধ$'
j£'!9'1'!9<8';3-£';32f9-;'#'(38'-29;!££!ধ32
j£'!9'23;';,!;-29;!££'8l9m1<9;#'$'8ধ)'&38>!88!2;@>-££#'=3-&'&W
j'!9<8'1'2;9,'8'-29<6'89'&'!££3;,'896<#£-9,'&68-38;3
6<#£-$!ধ32&!;'9,3>2#'£3>
www.woodbridgebath.com
28 1/2"
14 1/2"
15 3/8"
10 1/4"
2 1/2" 14 1/4"
12"
5 1/2"Rough-in
Standard
151/8"
22"
7 1/4"
2" 20 3/8"
4 3/8"

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
12"
Rough-in
Standard
Wall
Floor
WATER SUPPLY LOCATION&TECHNICAL INFORMATION
3
12"
15"
Rough-in
Standard
12"
4 1/2" 10"
Threaded
,<20l!;'8
<66£@-££!£='m
SideView
SideView
BackView
Wall
Floor
Flush GPF amount is factory
9';W3!&&-ধ32!£!&/<9;1'2;
is required.
Tank Top View(Inside)
Half
Flush
lm
Adjust the water level in the
toilet's tank if neccessary by
83;!ধ2+;,'!&/<9;1'2;
screw to increase lm or
decrease lfm a level ofwater
in the toilet's tank.
Full
Flush
lW¤m
Half
Flush
lm
R
WOODBRIDGE
IMPORTANT INFORMATION
www.woodbridgebath.com
You mayconnectwatersupplylinetothefillvalve.Withthis
modeltheshut-offvalvemaybelocatedanywhereoutsideof
41/2"fromcentersolongasthestub-outdoesn't exeed51/2"
outfromwalliflocatedbehindtoilet.
jMeasurements are ± c¥z!2&9<#/'$;;3$,!2+'>-;,3<;23ধ$'
j6'$-)$!ধ329{32)+<8!ধ329!8'9<#/'$;;3$,!2+'>-;,3<;23ধ$'
j£'!9'1'!9<8';3-£';32f9-;'#'(38'-29;!££!ধ32
j£'!9'23;';,!;-29;!££'8l9m1<9;#'$'8ধ)'&38>!88!2;@>-££#'=3-&'&W
j'!9<8'1'2;9,'8'-29<6'89'&'!££3;,'896<#£-9,'&68-38;3
6<#£-$!ধ32&!;'9,3>2#'£3>

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
4
REMOVE OLD TOILET
1.Shut offwatersupply line.Ifyoudonot haveshut-offvalvenear thetoiletshut offmainwater supplyline.
2.Flush theoldtoilet andmakesurethattankis empty.
3.Disconnect andremovewatersupply lineconnectedtothe toilet'stank.
4.Removeold toilet,bolts,nuts fromtheclosetflange.
5.Clean closetflangearea fromoldwax ringandputty sealantusingputtyknife fromthebase area.
6.Clean anyremaining debrisandwipe anywater attheinstallation area
7.Temporarilyplugflange onafloor withaflangeplug ortowelto preventgassesfromescaping
PREPARE CLOSET FLANGE
Figure5
INSTALL WAX RING
Important: safetyglassesmust bewornbytheinstaller
andall bystanders.
Coverthefloor withasoft-close blanket.Carefullyturn
thetoilet onit'sside orupside-downon theblanketwith
assistanceof asecondperson. Installwaxring overthe
horndischarge locatedonthe bottomofthe toilet'sbowl.
SeeFigure5
Note:Ceramicisafragilematerial. Youmustalwayscover
thefloor withasoft-cloth blanketifyouwanttoput the
toileton theflooron anyside otherthanthe bottomof
thetoilet. Ifyoudonotcoverthefloor withasoft-close
blanketcontact ofthetoilet withthefloor mayand will
causeminor ormoderatescratchesonthetoilet'ssurface.
Priorto installtionthe
waxring mustbekeptin
aroom temperature
between70-75ºF.
IMPORTANT!Themountingsurfacearea
mustbeclean,dry,andleveledprior to
installationofthenew toilet!
NOTE! Inspect the existingcloset flange for
damages.Ifdamaged,replaceit to new flange
beforeproceedingto the installation
$OZD\V8VH6RIW&ORWK%ODQNHW
www.woodbridgebath.com
Figure1 Figure2
Step1 Step2
Bathroom
Wall Bathroom
Floor
Closet Flange
12"
Rough-in
90º
90º
Bathroom
Wall Bathroom
Floor
Bathroom
Wall
toilet template toilet template
Figure3
Pencil
Locateandremovetemplatefromcarton.Placeovertoilet flange.Measurefrom backwalltomakesureitis square/evenwith wall.
Checkyourshut-offvalvetomakesureitclearsback oftemplate. SeeFigure3
IMPORTANT! Shutoffmainwatersupplypriortoinstallation!
Figure4
Usingtemplate outlinethearea
wherethe toiletwillsit withpencil
ortape tomoreeasily locateflange
bolts andmakeasolidconnection
betweenwax ringandflange when
set.Makesuretoremovetemplate,
leavingoutlinebeforeinstalling.
See Figure4
Step1.Insert2floor
boltsinside ofthetoilet
flange Step2.Slide the
closet boltsthrough
theholes andalignbolts
horizontaly.SeeFigure2
Makesure thatrough-inis 12"bymeasuringthedistance fromthewallto thecenterof theclosetflange. See Figure1
Bathroom
Floor

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
CONNECTTOILET'S TANK
TO WATER SUPPLY LINE
Connectthe watersupplyline betweenthetank andwater
shut-offvalveusinga toilethose(not supplied).When
connectingtoilet hosetightencoupling nuttothe tankby
1/4turn beyondthehandtight.
Turnonvalveonwatersupply lineandallow tanktofill.
Checkall connectionsforleakages andtightenas needed.
Oncetank isfilledwith waterflushit 4-5timesto perform
atest oftheflushing system.Atthe sametimecheck the
bottomof thetoiletfor leakstomakesurethatthe wax
ringis properlyinstalledand sealed.
Ifthere arenoleaks youare readyfinalizethe installion.If
anyshimsareinstalled atthebottom ofthetoilet's bowl
youmaytrim them.Applysilicone aroundbaseof the
toilet's.Allow 24hoursfor siliconetodry beforestart
usingthe toilet.SeeFigure8
Important:Leaksmaynotoccur duringorright afterthe
installation.Makesuretocheck forleakseverycouple
hoursfirst dayinstalled andandoccasionally checkit
everyday forthenextweektoensure thattoiletisproperly
installedand noleaksoccur. Ifanyleaksoccurimmediately
shutoff thewatersupply linevalveandcontactyourlocal
plumberto fixallleaks.
Important:
Undernocircumstances willwe beliablefor anyand all incidental damages
sustainedinconnectionwiththisproduct
Neithermanufacture,nordistributor, norretailerisresponsibleforwater
damageorfloodcauseddueto use of this product.
Undernocircumstances willwe beliablefor anyand all fees, cost of
installation/reinstallation/removal,subsequentdamageortransportationincase
oftheproductdefect
Figure6
Figure7
Figure8
INSTALLATIONINSTRUCTIONS
INSTALL NEW TOILET
Wall
Floor
Note:,WPD\EHUHTXLUHGWRXVHVKLPV
XQGHUWKHHGJHRIWKHWRLOHWVERZO'XHWR
PDQXIDFWXULQJSURFHVVRIYLWUHRXVFKLQD
FHUDPLFSURGXFWVHYHU\WRLOHWPD\KDYH
VOLJKWOHYHOYDULDWLRQV,WGRHVQRWPHDQ
WKDWWKHWRLOHWLVGHIHFWLYH,QDGGLWLRQ
5
Donot overtightennutonthe tankconnection.
Itmayandwill causewaterleakage.
R
WOODBRIDGE
www.woodbridgebath.com
Bathroom
Floor
Bathroom
Floor
Step 1. Liftandcarefully putthetoilet overthecloset
flangeinside theoutlinemade bytemplate sothecloset
boltscan gothroughthe mounting
holesin thetoilet'sbase. Oncethebowl isinthe position
pressthe bowldownwith slighttwistingmotion inlevel
positiontowards thefloor.Apply yourbody weightto
evenlycompressthe waxringto createwatertightseal.
Makesure thatthebowl isasleveledas possibletohavea
niceseal tight.
Donot rockthetoilet backandforth andsideto sideasit
mayandwillbreak asealand youwill needtoreplace the
waxring againandstart theinstallationprocess over.
SeeFigure6
Step 2. Oncethetoilet issetand leveledinstallwashers
andnuts overtheclosetbolts. Tightennuts.Donot
overtightenthenuts. Itmayandwillcause damagetothe
toilet'sceramicbase.Pleasekeepinmindthat becausethis
isa skirtedtrap-way toilet,itmayrequirealittlemoretime,
patienceand accessibilitytocomplete install. SeeFigure7
Using Hand Wrench
Included in Box
12"
Rough-in
Standard
Wall
Floor

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
ADJUSTMENT&MAINTENANCE(DUALFLUSHVALVE)
Gasket
Checkthe dualflush
valveandmakesurethat
itdoes nothaveany
damagedor missing
parts
Installa bodyofthe flush
intothe baseandmake
suretheycanbe totated
clockwisearbitrarily.
Installthe basewiththe
rubbergasketinthe
tank,turn thescrewas
illustratedtomakesure
thereis nowaterleakage
andno looseness
Fullflush andhalfFlush range
willdecline whenthebutton is
movedupwardfrom thebottom
Checkthe completeness
ofthe productbefore
adjustment
Takeoutthe locknutand
insertthe pushbutton
intothe tankcover
Adjustthe pushbutton
andlock thenutto make
itwell-fixedinthetank
Thedistance betweenthe
rodtail andvalvepush
buttonmust be1-2mm
Rotatethe valve
clockwiseto adjustits
positioninside ofthe
toilet'stank
Installthe sealinggasket
Putthe refilltubeinto the
whitecap holefirmly Therefill tubecan'tbe lower thanthe watersealinglevel Iftherod istooshort,please re-adjustit (outward
rotation).
Ifthe rodistoo longplease
cut-offthe extralengthand
re-adjustit.
1. BASE INSTALLATION
2. FLUSH VOLUME ADJUSTMENT
3. PUSH BUTTON ADJUSTMENT
4. REFILLTUBE ASSEMBLY TROUBLESHOOTING
FullFlush Half Flush
RIGHTWRONG
Water
Level
Important Note: £<9,!13<2;-9(!$;38@9';W3!&&-ধ32!£!&/<9;1'2;-98'7<-8'&W
This page is for reference only. All adjustments are already made by manufacturer.
R
WOODBRIDGE
www.woodbridgebath.com 6

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
7
ADJUSTMENT&MAINTENACE(FILLVALVE)
Instructions:
Whenvalveinstalled,the criticallevelmark
onfill valve(identified byC.L.markon
valvebody)shoudbe atleast1" abovetop
ofthe overflowpipe.
Required:
á:DWHUWHPSHUDWXUH|)
Important:
Undernocircumstancessellershallnot be liable for anyand
allincidentaldamagessustainedinconnection with this
product
Neithermanufacture,nordistributor, norretaileris
responsibleforwaterdamageorflood caused due to useof
thisproduct.
Undernocircumstancessellershallnot be liable for anyand
allfees,costofinstallation/reinstallation/removal,
subsequentdamageortransportationincaseoftheproduct
defect
95mm
58mm
Max 289mm, Min 189mm
l!?11T-211m
Max 230mm, Min 90mm
l!?¥11T-211m
Max 19.5mm - Min 8.5mm 45mm
WL
Checkthe fillvalveand
makesure thatitdoes
nothaveanydamagedor
missingparts
1.Press buckleandunscrew.
2.Pull thevalveupwardsorpress downtodesired height.
3.Unscrew thevalvebodyandfasten thebuckle
Rotatingscrew,riseorlowerthewaterlevel
toadjust waterleveltosuitable position
(watervolumewillgraduallyincrease when
theadjuster ismovedupwardfrom the
bottom.)
1. PREPARATION
2. WATER LEVELADJUSTMENT
Press and
unscrew
Solution1
Pull upwards
press down to
desired height
Unscrew
clockwise
and fasten
valves
Rotate screw to adjust
desired water level
Solution2
Installthe valveinto tank.Do
notuse anywrench tools.
Fastenwith handonly.
Connectwater supplytothe fill
valve.Turn onwater. Turn offwatersupply valve beforeheight adjustmentofthe
toilet'sfill valve.
Putthe refilltubeinto thewhite
caphole firmly.
3. FILLVALVE INSTALLATION
IMPORTANT:Donot useordropanychlorineoranyotherchemicals.Useofchemicalproducts willresult indamage tothe fill
valveandflush valvecomponentsand maycauseflood andproperty damage.Do notovertightenbolts/nutsasitmayand will
causedamagetothetoilet partsand componets.
Important Note: £<9,!13<2;-9(!$;38@9';W3!&&-ধ32!£!&/<9;1'2;-98'7<-8'&W,-96!+'-9(388'('8'2$'32£@W
All adjustments are already made by manufacturer.
C.L.
R
WOODBRIDGE
Removetheworn-out fittingsandclean yourtankprior totheinstallation ofthenew ones.Theremight bealotof impuritiesinyour
tankthat maycause damagetothe newpartsif youdo notcleanthemout. Thetankmust beabsolutelyclean priortoinstallation.
www.woodbridgebath.com

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
CLEANING&TROUBLESHOOTING(FILLVALVE)
Shutoff watersupplyline
beforefilter cleaning.
Water levelistoohighor
toolow Improper waterlevel adjustment Adjustthe waterlevel
Fillvalvefailsto shutoff
orfails tofillthe water
intothe toilet'stank
Usesoft spongesorsoft-cloths tocleanthe surface.Alwaysrinsethoroughlyanycleaningsolutions immediatelyaftercleaning.Do
notanychemicalremain onthesurface forextendedperiodsoftime.
Donotpouranymountsofchlorineor anyotherchemicals intothe tank.Use ofchemical productswill resultindamagetothefillvalveand
flushvalvecomponents andmaycause floodandpropertydamageandwillvoid warranty.
Note: filland flushvalvesaremaintenancefree.Nomaintenance isrequired.
1.Inlet valveswitch is
turnedon.
2.Inlet valvefloat crashed
againstceramicwall
3.Filter screenisclogged
dueto dirtywater
4.Improper refillhose
installation
1.Turnon inletvalveswitch
2.Adjust inletvalveposition
3.Clean thefilterscreen
4.Install refillhosecorrectly (see
diagramontheright)
Carefully,takeoutthefilter
frominlet byusing pliers. Usewaterto washandclean thefilter andadapterfrom any
debris.
Re-installthe filterand
re-connectthe watersupply
line.
FILLVALVE CLEANING
TROUBLESHOOTING
c{
{
Issue Cause 3£<ধ32 3£<ধ32
RIGHTWRONG
Water
Level
,03257$17
'212786($EUDVLYHFOHDQHUVVXFKDVDFLGDPPRQLDEOHDFKDQGVLPPLODUVROXWLRQV8VHRIVXFKVROXWLRQVPD\FDXVH
corrosion,finish peeling,and/ordullthe surface.
'212786(Abrasivespongesor cloth.Neverusesteel,wool, orwiredbrushes thatwillpermanently scratchthesurface.
R
WOODBRIDGE
8
www.woodbridgebath.com

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
9www.woodbridgebath.com
%LGHW6HDW,QVWDOODWLRQ,QVWUXFWLRQV
READ ALL INSTRUCTIONS BEFORE USING
When using electrical products, especially when children are present, basic safety
precautions shouldalways be followed, including the following:
1.The appliance is not to be used by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction.
2.Children being supervised not to play with the appliance.
3.This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved.
4.Children shall not play with the appliance.
5.Cleaning and user maintenance shall not be made by children without supervision.
DANGER –To reduce the risk of electrocution:
1. Do not use while bathing.
3. Do not place in or drop into water or other liquid.
4. Do not reach for a product that has fallen into water. Unplug immediately.
5. Do not wash the main unit or electrical plug with water or detergent.
6. Do not handle the electrical plug with wet hands.
7. Do not put a hand or other staff over the outlet of air dryer or block the outlet of air dryer.
8. Never disassemble,repair or modify this product.
9. During installation, disassembly, repaire and maintenance of the product,the power plug
must be switched off and water supply be shut off.
WARNING–To reduce the risk of burns, electrocution, fire, or injury to persons.
1. Close supervision is necessary when this product is used by, on, or near children or
invalids.
2. Use this product only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
3. Never operate this product if it has a damaged cord or plug, if it is not working properly,
if it has been dropped or damaged, or dropped into water. Return the product to a
service center for examination and repair.
4. Keep the cord away from heated surfaces.
5. Never use while sleeping or drowsy.
6. Never drop or insert any object into any opening or hose.
7. Do not use outdoors or operate where aerosol (spray) products are being used or
where oxygen is being administered.
8. Connect this product to a properly grounded outlet only. See Grounding Instructions.
9. Do not throw cigarettes and other burning stuff into toilet, otherwise it might cause fire.
10.This product is electric appliance, so it must be placed far away from water. Please
don’t drench urine and other liquid to it.
11.Do not lay on side or upside the product during the electrical circuit.
12.It is prohibited to use other electric appliances in the same socket.
13.It is forbidden to use the power extension or unstable loose outlet.
14.The old aging water supply hose can not be used, otherwise it might cause leakage,
fire or electrical shock.Installation of the bidet seat should include specified components
and new water supply hose.
2. Do not place or store product where it can fall or be pulled into a tub or sink.

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
10
R
WOODBRIDGE
www.woodbridgebath.com
CAUTION–
DANGER –
IMPORTANT SAFETY INSTRUCTIONS
Indicates that failure to follow the instruction may cause body injury or
property damage.
GROUNDING INSTRUCTIONS
Improper use of the grounding plug can result in a risk of electric shock.
SAVE THESE INSTRUCTIONS
1. Do not install or use the product in wet places as steam room etc.This product must be
connected to properly grounded power outlet socket.
2. It is recommended to use water-proof electrical outlet which should be lnstalled in the place
where is not easily got wet.
3. This product should be used with AC 110V-120V,50/60Hz electrical current only,load current
is at least 15A. P ower plug must be equipped with ground fault circuit interrupter or ground
fault electrical leakage protector or similar high sensitive, rapid type leakage switch
(Rated sensitive current under 15mA).
4. When it thunders,it is strongly recommended to pull out the power plug.
5. Do not stand on ceramic toilet.
6. Ceramic toilet must install floor fixing bolt.
7. Do not stand on product unit,seat and cover.
8. Do not lean against the seat cover when using the product,to avoid damage.
9. This product is equipped with soft-closing seal cover.Heavy pressing or pushing may damage
the soft-closing damper.
10. Do not use lacquer thinner,petrol,liquid medicine,detergent,insecticide,toilet cleanser and
scrubbing brush to clean the product.
11.Exposure to direct sunlight is prohibited.
12.Only use tap water or potable water;otherwise it may cause chafing.
13.Do not connect water supply to heater outlet.Make sure inlet water temperature at 3~35Û&
14.When the room temperature is under zero degree,please dry up the water tank,to avoid
freezing.
15.Raise rest room temperature to prevent the toilet from damage due to freezing.
16.When move the product from cold or wet environment into normal room temperature,wait for
2 hours until the condensation water is fully volatilized.Doing so can prevent the product from
electrical short-circuit.
17.When not using the product over three(3) days,drain the water out of the container and pull
the elelctrical plug from the wall outlet.
18.Stop using the product and shut off the power when product malfunctions,please contact the
service people for professional service.
This product should be grounded. In the event of an electrical short circuit, grounding reduces
the risk of electric shock by providing an escape wire for the electric current. This product is
equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged
into an outlet that is properly installed and grounded.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to
either flat blade terminal. The wire with insulation having an outer surface that is green with or
without yellow stripes is the grounding wire.
This product is factory equipped with a specific electric cord and plug to permit connection to a
proper electric circuit. Make sure that the product is connected to an outlet having the same
configuration as the plug. No adapter should be used with this product. Do not modify the plug
provided — if it will not fit the outlet, have the proper outlet installed by a qualified electrician. If
the product must be reconnected for use on a different type of electric circuit, the reconnection
should be made by qualified service personnel.

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
11
R
WOODBRIDGE
www.woodbridgebath.com
TECHNICAL SPECIFICATION
600ml
Container capacity
1000W
250W
50W
Rating power
Main Unit
Rating pressure
Water pressure
range
Electrical wire length is about 1.8m
Minimum water pressure 0.07MPa (20L/min. flowing pressure).
Maximum water pressure 0.8MPa (Hydrostatic pressure)
1050-1250W
AC 110-120V,50/60Hz
Heating power
Water
temperature
W ater volume
Cleansing mode
Spray cleansing
location
Water pressure
protector
Cleaning
device
Anti-fouling device
Safety device
6 different level adjustment
5 different level adjustment
Rear cleaning/Rear massage,Front cleaning for ladies
Pressure stabilize,Automatic pressure discharging
Warm wind speed
Warm wind
temperature
Heating power
Safety device
Drying
device
6 different level adjustment
6 different level adjustment
Over 4 M/S
Temperature sensor, Temperature controller, Thermal fuse
Temperature controller, Thermal fuse, Ground protection,
Leakage protection device, Air burning preventer
Heated seat
Surface
temperature
Heating power
Open and close
device
Heated burning
protection
Safety device
Quiet soft-closing device
The seat temperature will automatically lower to level
1 in 10 minutes after using
Intelligent
Night light
assembly
Mute setting
Intellignt,often in the off state
Buzzeroff during night
User ID setting To avoid disturbance from remote controls by multi-user
5 different level adjustment
Speedy water discharge device, Automatic nozzle cleaning,
Anti-syphon device, Anti-backflow device, Filter device
Seat sensor,
Temperature sensor , Temperature controller,
Thermal fuse

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
www.woodbridgebath.com 12
R
WOODBRIDGE PACKAGING LIST
Leakage protection plug
Whole set of product
Power cord
Infrared receiver
Nozzle baffle
Nozzle
The remote control
Buffer
Lid
Components Name
Seat
Release button
Drying
baffle
Water supply pipe
Front cleaning
Rear cleaning

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
www.woodbridgebath.com
13
R
WOODBRIDGE MAIN UNIT IDENTIFICATION
Main Unit Knob Instructions (Knob Applies)
1. When people is seated, press Rear Cleaning Button shortly to start rear cleaning function;
5HDUFOHDQLQJDERXWPLQVĺ'U\LQJDERXWPLQVĺ6WRSGU\LQJDXWRPDWLFDOO\
2. When rear cleaning function is on, long press Rear Cleaning Button to massage cleaning
function; long press again to stop massage cleaning function.
3. When the cleaning function is on, shortly press Rear Cleaning Button, the nozzle will
move back by one step;
4. When no one is seated, press Rear Cleaning Button, the nozzle will stretch out, people
can wash the nozzle manually.
Main Unit Side Button Instructions (Button Applies)
1. When people is seated, shortly press Front Cleaning Button to start front cleaning function;
)URQWFOHDQLQJDERXWPLQVĺ'U\LQJDERXWPLQVĺ6WRSGU\LQJDXWRPDWLFDOO\
2. When front cleaning function is on, long press Front Cleaning Button to start massage
cleaning function.
Long press Front Cleaning Button again to turn off massage cleaning function.
3. When cleaning function is on, shortly press Front Cleaning Button, the nozzle will move
forward by one step.
1. Long press Stop Button to make the main unit enter standby mode, press Stop Button again to
make the main unit return to Operating mode. [In standby mode, all functions are invalid by
pressing any button (on main unit or remote control) except Stop Button.
2. When people is seated, shortly press Stop Button on main unit to stop front cleaning, rear cleaning
or drying functions; When no one is seated, repeatedly press Stop Button on the main unit, the
main unit will switch between operating mode and power saving mode.
Rear
Cleaning
Button
Front
Cleaning
Button
Stop
Button
Front Back
Rear
Cleaning
Knob
Front
Cleaning
Knob
Stop Knob Press the knob vertically to stop the function in progress: rear cleaning, front
cleaning, drying or nozzle cleaning function.
1. When people is seated, turn Rear Cleaning Knob forward to start rear
FOHDQLQJIXQFWLRQ5HDUFOHDQLQJDERXWPLQVĺ'U\LQJDERXWPLQV
ĺ6WRSGU\LQJDXWRPDWLFDOO\
2. During rear cleaning, turn the knob forward, the washing position moves
forward, otherwise, the washing position moves backward.
1. When people is seated, turn Front Cleaning Knob backwards to start front
FOHDQLQJIXQFWLRQ)URQWFOHDQLQJDERXWPLQVĺ'U\LQJDERXWPLQVĺ
Stop drying automatically.
2. During front cleaning, turn the knob backwards, the washing position
moves backward, otherwise, the washing position moves forward.

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
www.woodbridgebath.com 14
R
WOODBRIDGE INSTALLATION LNSTRUCTION
960W
1400W(120V)
50W
Rear cleaning / Massage cleaning, Front cleaning /
Massage cleaning, Strong and weak washing (if applicable),
Warm and cold cleaning (if applicable)
110-120V，50/60Hz
Rated voltage
Rated power
Water pressure
range
The minimum necessary pressure 0.08MPa (hydrostatic pressure),
the maximum water pressure 0.8MPa (hydrostatic pressure)
6-level water temperature adjustment
Power Cord length is about 1.6m
Heating power
Water
temperature
Water volume 5-level adjustment
Anti-syphon device, Anti-backflow device, Filter device
The water temperature sensor, Anti-burning apparatus, Thermostat,
Temperature fuse, Ground fault protection, Leakage protection ,
Anti-freeze cracking device
Cleaning mode
Nozzle position
Water pressure
protector
Anti-fouling
device
Safety device
Pressure stabilizer, Automatic pressure discharging device
Main Unit
Cleaning
device
200W
High temperature preventer, thermal fuse
(If Applicable)
6-level adjustment
Over 0.2m³/minWarm wind speed
Warm wind
temperature
Heating power
Safety device
Drying
device
Technical Specification
None Photocatalyst
6- level adjustment
Deodorization
Method
Deodorization
Surface
temperature
Heating power
Soft close
The buzzer is off at night to avoid buzzer noise to guarantee a quiet
environment at night
Sterilization device
Plasma sterilization device
Noise-free setting
Heated seat Open and close
device
Prevent low
temperature burn
Safety device
Caring
device
Smart, Always on, Always off
Night light
assembly
After 10 minutes of use, the seat temperature will automatically drop
slowly to a low level
Seat sensor,Temperature senor,Bimetal thermostat,Thermal fuse
Antibacterial position Seat, Nozzle
To avoid disturbance from remote controls by multi-userUser ID setting
(If Applicable)
5-level adjustment

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
www.woodbridgebath.com
15
R
WOODBRIDGE
Packing List
Tee - joint (1)
2.Screws (2)
Screws
1.Base plate
Floor
1.Remote control
2.Remote control rack
3.Expansion screws (2)
4.Batteries (3)
3.Fixed piece (2)
Fixed piece
Batteries (3)
Expansion screws (2)
Expansion nut
4.Expansion nut (2)
Manual(including
warranty card)
Remote control
Remote control rack
The remote
control
assembly
Base plate
assembly
The filter
assembly
Certificate
of quality
Certificate of quality
Mounting
Cardboard
Mounting Cardboard
Manual
(including
warranty
card)
Main unit
Manual,
Certificate
of quality,
Mounting
Cardboard
Tee - joint

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
www.woodbridgebath.com 16
R
WOODBRIDGE INSTALLATION INSTRUCTION
Installation of Main Unit
Product Size and Installation Preparation Tool
403mm
380mm
130-190mm
517mm
434-493mm
＞490mm
＞25＜90
WrenchPhillips screwdriver
＋
Cup
Tape measure
12
Installation of base Installation and disassembly of
Main Unit
* This product has been tested for water flow before leaving the factory. There may be a small amount of residual water
dripping out when removing the product, which is not a malfunction.
* Do not install this product in a wet place such as a bathroom, and do not put it in a place prone to water.
Install the expansion nuts into the toilet mounting holes first, and then
install base plate, fixed piece and screws in sequence according to
the above illustration, then tighten.
Disassemble
Click
* Tips: Please confirm this seat fitting your current toilet.
Installation of Main Unit: Align main unit to base plate and push it into
the base plate, and a “click” sound means the main unit is installed in
place.Disassembly of Main Unit: Press the "Disassemble button", and
pull out the main unit when a "click" sound is heard.
* Hand can leave “Disassemble button” after press it to pull out main
unit.
click
Screws
Fixed piece
Expansion nut
Install
Base plate
Toilet mounting
holes
IInstall
Mounting
Cardboard
The black latch faces
Forward, Groove up

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
www.woodbridgebath.com
17
R
WOODBRIDGE
3Installation of Water inlet pipe and Tee joint
Angle Valve
Tee Joint
Water Inlet pipe
Current toilet water supply pipe
Connect to the
angle valve
Connect to
main unit
① Connect Tee joint to angle valve; (The original Tee joint should be removed);
② Connect the inlet end of water supply pipe to Tee joint according to the above illustration;
③ Connect main unit to Tee joint according to the above illustration.
Connect to Water
supply pipe

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
18
R
WOODBRIDGE
www.woodbridgebath.com
DAILY MAINTENANCE
1. The main unit buzzer beeps once, and the knob (button) starts self-test after the white light flashes.
2. The main unit buzzer beeps again, and the self-test is completed, and the knob (button) lights up
in white;
3. The function mode is turned on and in normal use.
Preparation for Start-Up
1. Turn on the angle valve
3. Safety self-test
Check the tightness of the threaded connection to ensure that there is no water leakage. Turn
the angle valve counterclockwise to adjust the opening to the maximum.
(Tips: when the valve is opened for the first time, the angle valve handle has a large torque)
2. Power Connection
Insert power line leakage protection plug into the power socket, press the reset switch, plug
indicator lights on indicating that the power is on.
Tips:
Press electric leakage test button prior to usage,
the reset switch pops up indicating that the leakage
protection function is normal. Electric leakage
test button
Reset switch
Indicator light
Press the TEST button (then RESET button) every
month to assure proper operation.
Angle valve

R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
R
WOODBRIDGE
19 www.woodbridgebath.com
Neutral cleaner
When there is dirt on the nozzle, maintain it according to the following methods:
1. When no one is seated, turn the knob forward (press Rear Cleaning Button on the main unit), then nozzle rod
is extended, and manually clean with a rag or soft brush.
2. Nozzle can be removed and cleaned separately. (Hold the nozzle rod in one hand and pull the nozzle out with
the other hand)
3. Put back the nozzle, and then press the knob button (Stop button) on the main unit or the "Stop" button on the
remote control, the guided rod retracts.
Filter Maintenance
Tips: Do not pull the nozzle rod to prevent the damage of the nozzle rod and motor.
Maintenance of Main Unit
Daily Maintenance
1.Turn off the power during maintenance of this machine.
2. Wipe the dirty area with a soft cloth that is wrung out of water.
3. After wiping, please turn on the power again.
Tips: Do not rinse the surface of the product directly with water
during maintenance.
Maintenance of the Nozzle
Time for maintenance: It is under normal
water pressure but poor flush performance
occurs.
1. Turn off the angle valve.
2. Unscrew toilet water inlet pipe and seat
water inlet pipe.
3. Take out filter and filter washer
4. Brush filter with toothbrush and clean filter
5. Re-install filter and filter washer, then
re-install water inlet pipe
3-way
connector
The filter
(Remove with
a nipper pliers)
Filter
washer
Connect to toilet
water supply pipe
Connect to seat water
inlet pipe