WMdoc082019 1-2
1
SECTION 1 INTRODUCTION
1.2 Getting Service ..........................................................................................2
General Contact Information................................................... 2
Wood-Mizer Locations............................................................. 3
1.3 Customer and Planer Identification ...........................................................4
1.4 Specifications ............................................................................................5
MB200 Dimensions .................................................................. 6
1.5 Warranty ....................................................................................................7
SECTION 2 SAFETY
2.1 Safety Instructions.....................................................................................5
SECTION 3 PLANER ASSEMBLY
3.1 Uncrating the Planer..................................................................................1
3.2 Assemble the Bed Sections .......................................................................3
3.3 Install the Side Rails..................................................................................4
3.4 Install the Leg Assembly ...........................................................................5
3.5 Install The Head Stops...............................................................................6
3.6 Install The Clamps.....................................................................................6
3.7 Leg Adjustment .........................................................................................7
3.8 Install the Gantry .......................................................................................8
3.9 Install the Head Retainers..........................................................................8
3.10 Install the Feed Chain................................................................................9
SECTION 4 PLANER SETUP
4.1 Bed Frame Setup .......................................................................................1
4.2 Electrical Hookup......................................................................................3
4.2 Electric Wiring ..........................................................................................4
4.3 Vacuum Hose Hookup ..............................................................................5
4.4 Sanding Head.............................................................................................6
SECTION 5 PLANER OPERATION
5.1 Turning on Planer ......................................................................................1
5.2 Power Feed ................................................................................................1
5.3 Cross Feed .................................................................................................2
5.4 Head Up & Down......................................................................................3
5.5 Start and Stop Cutter Head........................................................................4
5.6 Manual Operation......................................................................................4
SECTION 6 MAINTENANCE
6.2 Cross Feed Rope........................................................................................1
6.3 Head Up & Down Threads........................................................................1
