World Market 582743 User manual

Assembly Instructions
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST COST PLUS WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOM ER SERVICE CALL
CENTER TOLL FREE AT 877- 967-5362 FOR ASSISTANCE.
Page 1
SKU–582743
NOT FOR COMMECIAL USE
Segovia Occ Bench

Page 2
Component List
LABEL DESCRIPTION QTY
BACK RESTA 1
B
1
PICTURE
C
1
SEAT
D
E
F
2
LEFT FRAME
RIGHT FRAME
1
1
BACK CUSHION
SEAT CUSHION 2
LABEL Q’TY
H-1
H-2
PICTURE
x4
x8
LABEL Q’TY
H-3
H-4
DESCRIPTION PICTURE
x4
x2
ALLEN KEY
Ø14/Ø16x10mm
WOOD PLUG
8x45
8x55
SHORT ALLEN BOLT
LONG ALLEN BOLT
DESCRIPTION

A
B
Assembly Preparation
Before Beginning:
Page 3
• Have 2 adults on hand for assembly-
• Save all packaging until finished-
• Assemble on a clean non-marring surface (packing fo am)-
• Do not assemble on flooring or carpet-
• In case of missing parts, please contact your neare st Cost Plus World
Market store or call our customer service call cent er at call 1-877-967-5362.
• Read instructions, cover to cover-
• Unpack all hardware bags and components to ensure y ou have all parts-
C
D
E
F

Assembly Steps
Step 1
Page 4
(H-4) ALLEN KEY x1
Step 2
AC
H-1
H-4
H-2
H-2
H-4
(H-4) ALLEN KEY x1
H-2
H-4
H-4
H-4
H-2
B
H-2 H-2
H-2
H-2
H-2
C
A
B
D
H-1
H-2
H-1
(H-1) SHORT ALLEN BOLT 8x45 x2
(H-2) LONG ALLEN BOLT 8x55 x6
- Attach the Back Rest (A), Seat (B) to Right Frame (C) with Short Allen Bolt (H-1), Long Allen Bolt (H-2)
using Allen Key (H-4). Turn the components as illustrated in above diagrams
by
(H-1) SHORT ALLEN BOLT 8x45 x2
(H-2) LONG ALLEN BOLT 8x55 x2
- Attach the Left Frame (D) to Back Rest (A), Seat (B) to Left Frame (C) with Short Allen Bolt (H-1),
LongAllen Bolt (H-2) by using Allen Key (H-4). Turn the components as illustrated in above diagrams
- Fully tighten all bolts.

Assembly Steps
Page 5
Step 4
F
E
Step 3
- Place Back Cushion (E) and Seat Cushion (F) on as shown.
Step 5
H-3
H-3
H-3
H-3
H-3
- ready to use.The Bench is
(H-3) WOOD PLUG x4Ø14/Ø16x10mm
- Insert Wood Plug (H-3) and tap gently with hammer until flush to cover all holes as shown.

Page 6
For minor spots wipe with a wet cloth and mild detergent.
Slip covers can also be placed in a washing machine using cold water, mild detergent and
placed on gentle cycle. Do not use bleach. Remove the insert.
Line dry, do not place in the dryer.
We use a higher density foam to ensure the cushions do not break down in the
outdoor elements. Cushions will soften over time.
Flip the cushions to maintain the quality.
Care & Maintenance
• Do not put hot items directly on furniture surface.
• Do not clean furniture with harsh cleansers or polish.
• Do not place furniture near heating or cooling vents.
• Do not write on furniture without a padded barrier to protect the surface.
• Store furniture or use an appropriate furniture cover during cold or
inclement weather.
• Dust and pick-up spills using a clean, non-colored, lint-free cloth.
• Stains may be removed with mild soap solution and damp cloth.
• Not for commercial use. For residential use only.
Cushion and slip cover care:
Remove the slip cover from the cushion insert.
Do not wash the cushion insert.
Machine wash in cold water with similar colors using delicate cycle only
Line dry or lay flat.
Warm iron if needed.
•
•
•
•
•
CAUTION: As with any wood, the color may fade if left in direct sunlight or inclement
weather. Minor cracking may occur with age. These are naturally occurring features of
wood and do not affect product performance.
We recommend using our Outdoor Wood Furniture Finish sold separately to help
preserve and protect the wood and finish.