World Market Brinley 534981 User manual

Brinley Dining Bench
SKU - 534981
Assembly Instructions
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST COST PLUS WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER SERVICE CALL
CENTER TOLL FREE AT 877-967-5362 FOR ASSISTANCE.
Page 1

Page 2
Component
LABEL
A
B
Bench Seat 1
H-1 Long Bolt (M6x80mm) 2
Leg 2
DESCRIPTION QTY
List
Hardware List
Tool List
CSupport 1
DStretcher 1
EStopper 2
LABEL DESCRIPTION
H-2 Short Bolt (M6x50mm) 2
H-3 Spring washer (Ø6xØ11x2mm) 4
H-4 Flat washer (Ø6xØ18x2mm) 4
H-5 Bolt (M8x35mm) 8
QTY
T-1 Ball allen key (M4x30x110mm) 1
LABEL DESCRIPTION QTY
H-6 Spring washer (Ø8xØ14x2mm) 8
H-7 Flat washer (Ø8xØ20x2mm) 8

Page 3
Assembly Preparation
Read instructions, cover to cover.
Have 2 adults on hand for assembly.
Save all packaging until
Assemble on a clean non-marring surface (packing foam).
Do not assemble on ooring or carpet.
In case of missing parts contact your nearest Cost Plus World Market store or our
customer service call center 877-967-5362.
Unpack all hardware bags and components to ensure you have all parts.
Before Beginning:
C
D
E

Attached Support (C) and Stretcher (D) to the Legs (B) as shown in the picture below.
Assemble Support with Bench Seat. Position Bench Seat (A) up side down on non marring
padded surface. Secure the Support (C) using long bolt (H-1), short bolt (H2), spring
washer (H-3), flat washer (H-4) onto the underside of Bench Seat (A).
Do NOT tighten any hardware yet.
Page 4
Assembly Steps
Step 1
Step 2
H-1
T-1
T-1
H-3
H-4
H-2
H-3
H-4
D
CB
A
B
C
D
B
C
C
C
D
2x 2x
2x

Page 5
Assembly Steps
Step 3
Step 4
Secure and Level Bench
Adjust the levelers
if needed for stability.
A
E
B
Assemble Legs to Bench Seat. Secure Legs (B) to Bench Seat (A) as shown with
Bolt (H-5), Spring washer (H-6) and Flat Washer (H-7).
Tighten all bolts with Ball Allen Key (T-1) once ALL hardware are engaged.
H-7
T-1
H-6
H-5
Gently tap the
wedge down into the slot
as necessary
to secure bench stretcher.
4x

Care & Maintenance
• Do not put hot items direct ly on furniture surface.
• Do not clean furniture with harsh cleansers or polish.
• Do not place furniture in direct sunlight.
• Do not place furniture near
• Do not write on furniture without a padded barrier to protect the surface.
• Do not place furniture out side. For indoor use only.
• Dust and pick-up spills using a clean, non-colored, lint-free cloth.
• Stains may be removed with mild soap solution and damp cloth.
• Not for commercial use. For residential use only.
Page 6
heating or cooling vents.