World Market Segovia 585030 User manual

Assembly Instructions
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST
WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOM
ER SERVICE CALL
CENTER TOLL FREE AT 877- 967-5362 FOR ASSISTANCE.
Page 1
NOT FOR COMMERCIAL USE
Segovia 3 Seat Sofa
SKU-585030

Page 2
Component List
LABEL DESCRIPTION QTY
BACK RESTA 1
B
1
PICTURE
C
1
SEAT PANEL
D
E
F
3
LEFT FRAME
RIGHT FRAME 1
BACK CUSHION
SEAT CUSHION 3
LABEL Q’TY
H-1
H-2
DESCRIPTION PICTURE
x4
x10
LABEL Q’TY
H-3
H-4
DESCRIPTION PICTURE
x4
x2
ALLEN KEY
8x45
8x55
Ø14/Ø16x10mm
GCENTER SUPPORT LEG 1
WOOD PLUG
SHORT ALLEN BOLT
LONG ALLEN BOLT

A
B
Assembly Preparation
Before Beginning:
Page 3
• Have 2 adults on hand for assembly.
• Save all packaging until finished.
• Assemble on a clean non-marring surface (packing fo am).
• Do not assemble on flooring or carpet.
• In case of missing parts, please contact your neare
st
World
Market store or call our customer service call cent er at call 1-877-967-5362.
• Read instructions, cover to cover.
• Unpack all hardware bags and components to ensure y ou have all parts.
C
D
E
F
G

Assembly Steps
Step 1
Page 4
(H-1) SHORT ALLEN BOLT 8x45 x2
(H-4) ALLEN KEY x1
Step 2
AC
(H-2) LONG ALLEN BOLT 8x55 x8
H-1
H-4
H-2
H-4
(H-4) ALLEN KEY x1
H-2
H-4
H-4
H-4
H-2
B
C
A
B
D
H-1
H-2
H-1
H-2
H-2
H-2
H-2
H-2
H-2
H-2
H-2
- Attach the Back Rest (A), Seat (B) to Right Frame (C) with Short Allen Bolt (H-1), Long Allen Bolt (H-2)
using Allen Key (H-4). Turn the components as illustrated in above diagrams
- Attach the Left Frame (D) to Back Rest (A), Seat (B) to Left Frame (C) with Short Allen Bolt (H-1),
LongAllen Bolt (H-2) by using Allen Key (H-4). Turn the components as illustrated in above diagrams
- Fully tighten all bolts.
by
(H-1) SHORT ALLEN BOLT 8x45 x2
(H-2) LONG ALLEN BOLT 8x55 x2

Assembly Steps
Page 5
Step 5
F
E
Step 3
- Place Back Cushion (E) and Seat Cushion (F) on as shown.
Step 6
H-3
H-3
H-3
H-3
H-3
Step 4
- Attach the Center Support Leg (G) to Seat Panel (B).
G
- ready to use.The Bench is
- Adjust levelers if needed.
(H-3) WOOD PLUG x4Ø14/Ø16x10mm
- Insert Wood Plug (H-3) and tap gently with hammer
until flush to cover all holes as shown.

Page 6
For minor spots wipe with a wet cloth and use a mild detergent. Do not use bleach.
Slip covers can also be placed in a washing machine. Remove the slip cover from the insert, do not
place insert in the washing machine. Use gentle cycle, cold water and no bleach.
Line dry, do not place in the dryer.
We use a higher density foam to ensure the cushion do not break down in the outdoor elements.
Cushion will soften over time.
Flip the cushions to maintain the quality.
Care & Maintenance
• Do not put hot items directly on furniture surface.
• Do not clean furniture with harsh cleansers or polish.
• Do not place furniture near heating or cooling vents.
• Do not write on furniture without a padded barrier to protect the surface.
• Store furniture or use an appropriate furniture cover during cold or
inclement weather.
• Dust and pick-up spills using a clean, non-colored, lint-free cloth.
• Stains may be removed with mild soap solution and damp cloth.
• Not for commercial use. For residential use only.
CUSHION AND SLIP COVER CARE:
CAUTION:
As with any wood, the color may fade if left in direct sunlight or inclement
weather. Minor cracking may occur with age. These are naturally occurring features of
wood and do not affect product performance.
We recommend using our Outdoor Wood Furniture Finish sold separately to help
preserve and protect the wood and finish.
For best results remove cushions during cold or inclement weather and store in a dry are.
If cushions do become wet allow to completely dry before storing to prevent mold and mildew.