World Market 597206 User manual

NEAREST WORLD MARKET STORE.
Page 1
NOT FOR COMMERCIAL USE.
ALICANTE II BENCH
SKU - 597206

2
Back Cushion
F1
Seat Cushion
A
B
C
D
E
Seat Frame
Right Leg
Left Leg
Back Frame
1
H-1
H-2
H-3
Short Allen Bolt (M6x15)mm
Spring Washer
Flat Washer (M6x1)mm
Allen Key
12
15
15
1
Page 2
1
1
1
H-4
T-1
Long Allen Bolt (M6x25)mm 3

Page 3
World Market store
or call our customer service call center at call 1-877-967-5362.

H-1
H-2
H-3
Short Allen Bolt (M6x15)mm
Spring Washer
Flat Washer (M6x1)mm
Allen Key
x12
x12
x12
T-1 x1
H-1
H-3
T-1
Prepare the assembly by placing Seat Frame (A), Right Leg (B) and Left Leg
Page 4
Step 1
down onto a
(
C),
padded, non-marring surface. Arrange the components as shown above.
H-2 Clockwise
Secure the of Seat Frame (A) to both Left/Right Legs (B/ C) using Short Allen Bolt (H-1),
Spring Washers (H-2) and Flat Washers (H-3), stacking the hardware in the order as shown.
Engage all bolts first, and then fully tighten them using Allen Key (T-1).
B
A
C
x4

Page 5
Step 2
Insert Back Frame (D) to Seat Frame as shown.
D

H-4
H-2
H-3
Long Allen Bolt (M6x25)mm
Spring Washer
Flat Washer (M6x1)mm
Allen Key
x3
x3
x3
T-1 x1
Page 6
Step 3
H-4
H-2
H-3
T-1
Clockwise
Place Seat Frame upside down. Next, using Long Allen Bolts (H-4), Spring Washers (H-2)
and Flat Washers (H-3), stacking the hardware in the order as shown.
Engage all bolts first, and then fully tighten them using Allen Key (T-1).
x3

Page 7
F
E
E
Leveler Feet Cap.
Step 4
Using a second person to assist you, turn the Bench upright. Place Seat Cushion (F),
Back Cushion (E) into position as shown. Ensure all bolts have been fully tightened.
Assembly is now complete and the chair is ready for use.
NOTE: Levelers can be pre-installed for height adjustment to achieve stability only AFTER
the unit is moved to the desired location. DO NOT drag the unit as this may damage the
levelers.
Ensure all bolts are fully tightened every 3 months to ensure stability.

Page 8
CUSHION AND SLIP COVER CARE:
For minor spots wipe with a wet cloth and use a mild detergent. Do not use bleach.
Slip covers can also be placed in a washing machine.
Remove the slip cover from the insert, do not place insert in the washing machine.
Use gentle cycle, cold water and no bleach.
Line dry, do not place in the dryer.
We use a higher density foam to ensure the cushion does not break down in the outdoor elements.
Cushion will soften over time.
Flip the cushions to maintain the quality.
For best results remove cushions during cold or inclement weather and store in a dry area.
If cushions do become wet allow to completely dry before storing to prevent mold and mildew.

Page 9