World Market Marciana 582732 User manual

SKU - 582732
Page 1
Assembly Instructions
THANK YOU FOR PURCHASE. IF YOU HAVE ANY QUESTIONS
PERTAINING TO THE ASSEMBLY OF THIS FURNITURE PIECE, PLEASE CONTACT
THE NEAREST COST PLUS WORLD MARKET STORE.
IF YOU ARE NOT NEAR A STORE, PLEASE CALL OUR CUSTOMER SERVICE CALL
CENTER TOLL FREE AT 877-967-5362 FOR ASSISTANCE.
R
Marciana Occasional Chair

LABEL PICTURE DESCRIPTION QTY
A1
Component List
Page 2
B1
Seat Frame
C
D
E
1
1
2
Right Leg Frame
Left Leg Frame
LABEL PICTURE DESCRIPTION QTY
Hardware
H-1 6
H-2
H-3
2
1
Allen Key
Allen Bolt
(M8 x 40mm)
Allen Screw
(M6 x 80mm)
F
G
Back Middle Slat
Back Upper Crossbar
Back Cushion
Seat Cushion
1
1

Page 3
Before Beginning:
Assembly Preparation
Unpack all hardware bags and components to ensure you have all parts-
Read instructions, cover to cover-
Have 2 adults on hand for assembly-
Do not assemble on flooring or carpet-
Assemble on a clean non-marring surface (packing foam)-
Save all packaging until finished-
In case of missing parts, please contact nearest Cost Plus World Market
store or our customer service call center 877-967-5362.

TOP
FRONT
TOP
FRONT
NOTE:It is strongly recommended that two adults are on hand for the assembly of this product.
Place the Right Leg Frame (C) down onto a padded, non-marring surface as shown.
Using a second person to assist you, align Seat Frame (A) with the corresponding
holes on Right Leg Frame (C) and secure using 3 Allen Bolts (H-1) and Allen Key (H-3).
Engage Allen Bolts (H-1) but do not fully tighten them yet.
Using a second person to assist you, insert Back Upper Crossbar (D) into the
corresponding peg hole on Right Leg Frame (C) and then secure using Allen Screw(H-2)
as shown.Engage Allen Screw (H-2) using Allen Key (H-3) but do not fully tighten them yet.
Assembly Steps
Page 4
Step 1
Step 2
(H-1)
(H-3)
Allen Bolt x 3
Allen key x1
H-1
H-3 A
C
(H-3) Allen key x1
(H-2)
Allen Screw x 1
H-2
H-3
D
C

TOP
FRONT
TOP
FRONT
Using a second person to assist you, insert the slotted pegs on the end of both
Back Middle Slats (E) into the corresponding slots on Right Leg Frame (C) as shown.
Using a second person to assist you, carefully place Left Leg Frame (B) into position onto
the assembly from Step 3, making sure the slots on all corresponding components align
as shown. Secure Seat Frame (A) to Left Leg Frame (B) using 3 Allen Bolts (H-1) and
Allen Key (H-3). Next, secure Back Upper Crossbar (B) to Left Leg Frame (B)
using Allen Screw (H-2) and Allen Key (H-3). FULLY TIGHTEN all allen bolts and allen
screws from Steps 1-4 at this time using Allen Key (H-3).
Page 5
Step 3
A
C
D
E
E
Step 4
H-1
H-3
Assembly Steps
(H-1)
(H-3)
Allen Bolt x 3
Allen key x1
(H-2)
Allen Screw x 1
H-2
H-3
B
D
C

TOP
FRONT
Page 6
Using a second person to assist you, carefully turn the assembly upright. Ensure that all
bolts have been fully tightened.
NOTE: Levelers can be used for
additional adjustment if needed.
Insert Seat Cushion (G) onto Seat Frame assembly as shown, making sure the cushion
sits flush along the back of the frame assembly. Next, place both Back Cushion (F) against
the back assembly. Using a second person to assist you, place the completed assembly
into the desired location and then finalize any leveling adjustments using the adjustable
levelers as shown. Assembly is now complete and the product is ready for use.
CAUTION: Adjust pre-installed levelers only AFTER the unit has been moved into the
desired location for use. DO NOT drag the unit as this may damage the levelers.
Step 5
Assembly Steps
Step 6
F
G

Page 7
CAUTION: As with any wood, the color may fade if left in direct sunlight or inclement weather.
Minor cracking may occur with age. These are naturally occurring features of wood and
do not affect product performance.
We recommend using our Outdoor Wood Furniture Finish sold separately to help preserve
and protect the wood and finish.
Do not put hot items directly on furniture surface.
Do not clean furniture with harsh cleansers or polish.
Do not place furniture near heating or cooling vents.
Do not write on furniture without a padded barrier to protect the surface.
Dust and pick-up spills using a clean, non-colored, lint-free cloth.
Stains may be removed with mild soap solution and damp cloth.
Care & Maintenance
Not for commercial use. For residential use only.
Store furniture or use an appropriate furniture cover during cold or inclement weather.