WOWME Kids 4G Safe+ User manual

Kids 4G Safe+
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –16
Čeština
17 –30
Slovenčina
31 –44
Magyar
45 –58
Deutsch
59 –73

3
The product user guide contains product features, how to use, and the operating procedure.
Read the user manual carefully to get the best experience and avoid unnecessary damage.
Keep this manual for future reference. If you have any questions or comments about the
device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4
Getting Started
Preparation Before Putting Into Operation
Prepare the SIM card according to the following instructions.
SIM card must be in the Nano size (see the image below).
PIN code must be deactivated. You can deactivate the PIN when you insert the SIM
card into your mobile phone.
For the correct function of the device, internet and call services must be activated on
the SIM card.
Note: Average data consumption of the device is about 100 MB per month. Ensure that the
SIM card is fully compatible with 4G network.
Warning: If there is no data plan active or enough money on your prepaid card, watch will
rapidly discharge as it repeatedly tries to start the corresponding connection. Location and
communication services are not available.
Fully charge your device using supplied USB cable plugged into a power adapter. Do not use
the fast charger or laptop USB port for charging! After a few moments, screen will turn on
automatically and you will see the charging indicator. Before first use charge device for at
least 2 hours.

5
Inserting the SIM Card into Your Device
The device must be turned off before inserting the SIM card. You can turn it off by long
pressing the side button. Use the adaptor that is part of your watch and insert adaptor with
the SIM card in the direction as shown on the picture bellow. Use the supplied flat tool to
push the SIM card into the device until it clicks.
Turn on the Device
After the device is fully charged and the SIM card is inside, you can turn on the device using
turn on/turn off button. It takes approximately three minutes to load GSM or GPS signal. You
can see the status icons in top-left corner of the screen. It is possible that the GPS signal will
not load inside of the building. We recommend taking the device out before the first use.
GPS Setup
To ensure proper GPS functionality and accuracy, the first power-up must be done outdoors
with good GPS signal coverage. Otherwise, an inaccurate location will be stored and the
device will continue to display an inaccurate location.

6
Pairing
Download the WowME Tracker app
Full functionality and all settings of the device are available in the
WowME Tracker app. Use the following QR code to download the app
or search WowME Tracker on App Store or Play Store.
Language Setup
You can change the language of the application before logging into the application on the
login page. If you are already logged in, you must log out to return to the login page.
Register Your Device
After registering in the app for the first time, you will be prompted to register your device.
Scan the QR code with the registration code or enter the registration number. The
registration number and QR code can be found on the slip that comes with the device. In
case the slip is missing from the package, please visit our FAQ section on the website, where
it shows how to proceed in such a case.
Scan the QR code from the tag with
registration codes (included in the
package) or type in the code shown
below the QR code.

7
Device Functions
All settings are available in the WowME Tracker app or also directly in the menu of your
device.
App Menu
All settings listed below, and others can be selected in the WowME Tracker app.
Location Services
For first use of the GPS watch, we recommend testing the device outdoors to ensure correct
synchronization with the GPS position from satellites and get correct local coordinates in the
WowME Tracker. Device tracking will be more accurate when you later bring it back inside.
If you control more devices in the WowME Tracker app (maximum of 50 devices on one
account), you need to log out and log in again. All settings will be automatically updated
regarding possibilities of each device.
Device can track position in three modes:
By clicking on your
device name, you
can choose from
the list of devices in
case you use more
than one WowME
GPS Tracking watch
or SOS band.
Quick access to
Contacts, voice and
text messages and
direct dial the
device.
Easily check the last
update of location
of theguarded
device on the home
screen.

8
Normal mode (once every ten minutes)
Saving mode (once an hour)
Tracking mode (once a minute)
Chosen mode influences the battery consumption. For basic overview about the location of
your loved one, we recommend using longer update frequencies to ensure longer service of
your device without charging. In saving mode, battery life of the device is approximately two
days, while in normal mode it lasts for about one day.
After clicking on map on the main screen of WowME Tracker app, you can see the position of
your watch. You can check when this position was updated for the last time and what type of
location service was used (GPS, WiFi or LBS).
By pressing manual location button (green mark, as seen on the screenshot below), you can
manually refresh real-time location. Firstly, you will get quick update using GPS and after less
than a minute you shall get more accurate GPS position when available. If your device isn’t
receiving GPS signal, only LBS location will be displayed.
List of devices
Location of selected device
Your location
Safety zone set-up
Device tracking history
Switch map type
Update location manually
Detailed information about
device location and battery
status

9
Types of Location Services Used by the Device
This device uses GPS, Wi-Fi or LBS (localization using GSM network) for location service.
GPS determines position with accuracy up to five meters. Accuracy depends on the
GPS signal which can be weakened in an environment with high trees or buildings.
GPS signal is usually not available when the device is indoors.
Wi-Fi localization uses nearby Wi-Fi networks to determine its location which is based
on the location listed in public list of Wi-Fi networks.
LBS uses GSM network and depends on density of signal towers of your mobile
provider in your location. It is usually very inaccurate and in some areas location
displayed by WowME Tracker app can have difference varying between 200 and 500
meters.
Please see important information regarding using location services below:
If you want to display only accurate location of your device, you can turn off LBS
usage in the WowME Tracker app. Please note that watch will use only GPS which is
not available indoors. It means that watch will track changes of position only outside.
If device stops moving or shaking, location service automatically activates standby
mode to save the battery. Device will automatically update location only when watch
is on your hand, and you are moving.
Location if Wi-Fi is dependent on data entered by administrator of the Wi-Fi network.
It can be inaccurate if admin of the Wi-Fi network does not show correct information
about their Wi-Fi location. This feature cannot be influenced by the device.

10
Pairing with Another Account
It is possible to connect one device with multiple accounts. The first account connected will
be perceived as admin account, the other bound accounts will have to be confirmed by the
admin account. First picture shown displays what the second account sees, while the second
picture shows what the admin account has to authorize.
Safety Features
SOS Call
In WowME Tracker app you can set up to three different SOS numbers. After long pressing
the red button, the device will automatically dial the numbers in selected order. If nobody
answers the phone, the device will try again after 30 to 40 seconds. This way it can dial up to
two times per number. You can also set SMS alert (see below) with information about SOS
alert.
Note: When the battery of the device is low, all functions are disabled, and touch button
doesn’t work to save the remaining battery capacity for SOS Call. Functions of starting SOS
Call with the side button is still active in the low power mode.
SMS Alert
After making SOS call, the device will automatically send a text message to chosen phone
number with information about its location and time of the SOS alert. You can also set up
SMS alert for situation when the battery is low (below 20%).

11
Reject Unknown Calls
To protect device user from scammers and unrequested calls, you can set up rejecting
unknown calls. If an unknown number (meaning not saved in contact list of your watch) calls
to your device, you will receive a notification to the WowME Tracker app.
With function “Retrieve watch SMS”, you can also read in SMS received in your device in the
WowME Tracker app. It is useful for receiving verification codes or other important SMS
messages.
Safety Zone
You can set up safety zones on the map. Device will automatically
notify you when user leaves selected safe zone.
Open “Safety Zone”on the map.
Click on “+”in the bottom part of the screen.
Find the map place where you want to set safety zone and
click on it.
Type the name of the zone and set up the radius, then
click on “OK”.
Note: WowME Tracker enables three safety zones for each device.
Ensure that safety zones don’t overlap with each other.
Disable Functions
If you do not want device user to call other numbers than those
saved in the Contact list, you can turn off access to the Dial Pad.
You can also remotely turn off GPS to save the battery. Device
uses only Wi-Fi network localization or inaccurate mobile network
localization.
Remote Health Check
In “Health”tab of the WowME Tracker app you can remotely check health of device user. You
can see the real-time information about physical activity (steps, calories burnt, and distance
walked). Please note that this device does not substitute a medical device and all measured
values are informative only.
Please take into account that Steps function needs to be activated in the WowME Tracker app
first (click on “Health”→“Steps”→“Switch”). Without activating this function, you cannot
access steps count in the app nor in your device. For current measuring of calories or
distance, please set also other information in “Steps”menu including weight and average
Step Length.

12
Watch Removal Detection
The device sends a notification after children take the watch off their wrists. The notification
is automatically displayed on the smartphone in the WowME Tracker app. You can turn this
feature off in the app menu.
Note: The watch automatically detects removal when the distance from the surface under the
watch changes. If you place the watch on a table with the sensors facing up, it may
repeatedly issue take-down alerts. If you are not using the watch, place it with the sensors
facing down or turn this function off completely.
Other Functions
Night Power Saving
If you know that the device user doesn’t wear watch while sleeping, you can set automatic
power saving for night time period.
Wi-Fi settings
To save battery and data consumption, you can manually set up Wi-Fi connection for
networks where the device user often spends time in the same ways as you would do on your
smartphone. This device also automatically use all Wi-Fi networks to determine its location
(uses all available Wi-Fi networks, not only those that you set up in the “Watch Wi-Fi
Settings”).
Do Not Disturb
You can set different periods of day when watch will automatically switch into the Do Not
Disturb mode (e.g., during school hours). Watch will automatically switch to silent mode and
stop incoming calls.
Activity Schedule
In WowME Tracker app, you can set up a timetable for school or other activities of your kids
that can be displayed on the smartwatch if you want to remind it to your child.
Music
You can save music and other audio files to your WowME Kids 4G Safe+. To so do, connect
the 4pin charging cable to your watch and the other end to your laptop or computer. On the
watch, select “Media Device”. Next, on your laptop or computer, access the watch as a
memory device through file explorer, and copy the music files (AAC, AMR, WMA, MP3, MIDI
and so on) into the “Music”folder. Once you’re done, disconnect the cable and play the
music from your watch.

13
FAQ
Battery consumption of the device is too high. How can I make device life-time longer?
Battery consumption is mostly determined by location services. If the battery of your device is
out sooner than you want, try longer frequency of location update. We recommend longer
periods to save battery as you can always manually check location in the WowME Tracker app
and other services work without restriction (such as safety zones etc.). Battery consumption is
also lowered by Wi-Fi usage when used instead of mobile data. Please set up Wi-Fi
connection in the WowME Tracker ap or directly in the menu of your watch.
The device is offline in the WowME Tracker app.
Missing connection between the device and WowME Tracker app can be caused by multiple
problems. Please check that your device meets following criteria:
The battery of the device is charged.
PIN code of the SIM card is deactivated.
SIM card has an active data plan or enough money for pay-as-you-go data.
Location services are very inaccurate.
Accuracy of your device’s location services are depending on method that is currently used in
operation. It is determined by the following factors.
When outside, the device is using primarily GPS that is affected by the surrounding
environment. GPS has weaker signal close to high buildings, trees etc. If the GPS is not
available or not loaded yet, the device will use LBS that determines location from the mobile
network. This is dependent on density of signal towers network. You can turn off LBS
localization in the WowME Tracker to keep more precise GPS localization only.
When indoors, GPS is not available. Device primarily uses LBS location that is very inaccurate.
Location can be updated when the device connects to a nearby WiFi. If you want more
accurate location service, please turn off LBS localization in the WowME Tracker. Device will
show you WiFi location and in case that the WiFi is not available, it will show the last update
of outdoor GPS position.

14
FAQ Website
Not sure how to set up your watch, need help with its functions or want to know more about
it?
We have prepared a FAQ section for you on our website. You can visit it via the link here:
https://www.alza.cz/faq-wowme
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need
repair or other services during the warranty period, contact the product seller directly, you
must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which
the claimed claim may not be recognized:
Using the product for any purpose other than that for which the product is intended or
failing to follow the instructions for maintenance, operation and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person
or mechanically through the fault of the buyer (e.g. during transport, cleaning by
inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries,
etc.).
Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic
discharge voltage (including lightning), faulty supply or input voltage and inappropriate
polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation
to change or extend the functions of the product compared to the purchased design or
use of non-original components.

15
EU Declaration of Conformity
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Smartwatch
Model / Type: Kids 4G Safe Plus
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Prague, 19.6.2023

16
WEEE
This product must not be disposed of as normal household waste in accordance with the EU
Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU). Instead, it shall
be returned to the place of purchase or handed over to a public collection point for the
recyclable waste. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. Contact your local
authority or the nearest collection point for further details. Improper disposal of this type of
waste may result in fines in accordance with national regulations.

17
Uživatelská příručka k výrobku obsahuje funkce výrobku, návod k použití a postup obsluhy.
Přečtěte si pozorně uživatelskou příručku, abyste získali co nejlepší zkušenosti a předešli
zbytečným škodám. Tento návod si uschovejte pro budoucí použití. Máte-li jakékoli dotazy
nebo připomínky k zařízení, obraťte se na zákaznickou linku.
✉www.alza.cz/kontakt
✆[phone]
Dovozce Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

18
Začínáme
Příprava před uvedením do provozu
Kartu SIM připravte podle následujících pokynů.
Karta SIM musí mít velikost Nano (viz obrázek níže).
Kód PIN musí být deaktivován. Kód PIN můžete deaktivovat při vložení karty SIM do
mobilního telefonu.
Pro správnou funkci zařízení musí být na kartě SIM aktivovány služby internetu a
volání.
Poznámka: Průměrná spotřeba dat zařízení je přibližně 100 MB měsíčně. Zkontrolujte, zda je
karta SIM plně kompatibilní se sítí 4G.
Varování: Pokud nemáte aktivní datový tarif nebo dostatek peněz na předplacené kartě,
hodinky se při opakovaných pokusech o spuštění příslušného připojení rychle vybijí.
Lokalizační a komunikační služby nejsou k dispozici.
Plně nabijte zařízení pomocí dodaného kabelu USB připojeného k napájecímu adaptéru. K
nabíjení nepoužívejte rychlonabíječku ani USB port notebooku! Po několika okamžicích se
obrazovka automaticky zapne a zobrazí se indikátor nabíjení. Před prvním použitím
nabíjejte zařízení alespoň 2 hodiny.

19
Vložení karty SIM
Před vložením karty SIM musí být zařízení vypnuté. Vypnout jej můžete dlouhým stisknutím
bočního tlačítka. Použijte adaptér, který je součástí hodinek, a vložte adaptér s kartou SIM ve
směru, jak je znázorněno na obrázku níže. Pomocí dodaného nástroje zasuňte kartu SIM do
zařízení, dokud nezacvakne.
Zapnutí zařízení
Po úplném nabití zařízení a vložení karty SIM můžete zařízení zapnout pomocí tlačítka
zapnout/vypnout. Načítání signálu GSM nebo GPS trvá přibližně tři minuty. Stavové ikony
můžete vidět v levém horním rohu obrazovky. Je možné, že uvnitř budovy se signál GPS
nenačte. Před prvním použitím doporučujeme zařízení zapnout ve venkovním prostředí.
Nastavení GPS
Aby byla zajištěna správná funkčnost a přesnost GPS, musí být první zapnutí provedeno
venku s dobrým pokrytím signálem GPS. V opačném případě se uloží nepřesná poloha a
zařízení bude nadále zobrazovat nepřesnou polohu.

20
Párování
Stáhněte si aplikaci WowME Tracker
Úplné funkce a veškerá nastavení zařízení jsou k dispozici v aplikaci
WowME Tracker. Ke stažení aplikace použijte následující QR kód nebo
vyhledejte aplikaci WowME Tracker v App Store nebo Play Store.
Nastavení jazyka
Jazyk aplikace můžete změnit před přihlášením do aplikace na přihlašovací stránce. Pokud
jste již přihlášeni, musíte se odhlásit, abyste se vrátili na přihlašovací stránku.
Registrace zařízení
Po první registraci v aplikaci budete vyzváni k registraci zařízení. Naskenujte QR kód s
registračním kódem nebo zadejte registrační číslo. Registrační číslo a QR kód naleznete na
lístečku, který je dodáván se zařízením. V případě, že tento lístek v balení chybí, navštivte naši
sekci Často kladené otázky na webových stránkách, kde je uvedeno, jak v takovém případě
postupovat.
Naskenujte QR kód ze štítku s
registračními kódy (je součástí balení)
nebo zadejte kód uvedený pod QR
kódem.