WOWME KW66 User manual

KW66
User Manual • Uživatelský
manuál • Užívateľský manuál •
Használati utasítás •
Benutzerhandbuch

2
English
3 –14
Čeština
15 –26
Slovenčina
27 –38
Magyar
39 –50
Deutsch
51 –62

3
The product user guide contains product
features, how to use, and the operating
procedure. Read the user manual carefully to
get the best experience and avoid unnecessary
damage. Keep this manual for future reference.
If you have any questions or comments about
the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53,
Holešovice, 170 00 Praha 7, www.alza.cz

4
Product introduction
Wearing
Wear the wristband about one finger away from
the wrist bone and adjust the tightness of the
wristband to a comfortable position.
Tip: If you wear the strap too loose, the data
acquisition of heart rate sensor may be affected.
Wrist
strap
Touch
screen
Charging
cable
Heart
rate
sensor
Power button
(Press and
hold the Power
button for 5
seconds
to turn it on Press
the power button
to wake the
screen or return
to the
previous
interface)
Charging
cable

5
Connection and binding
1. Scan the QR code on the watch display
(Settings-APP Download) by your mobile phone,
and then install the APP GloryFit. You can also
scan the QR code below to download and install
GloryFit from the mobile APP store.
2. After installing the APP open and log in
GloryFit , then select (device KW66_ to be added)
on the device page so as to connect it.

6
Tips:
1. In the process of pairing, check if the
Bluetooth function on your mobile phone is
enabled, so that the watch can be connected to
your mobile phone.
2. lf the device cannot be found in the pairing
process, or the device cannot be connected
during use, please click "Settings - Reset" on the
watch, then try to start the pairing again.
3. lf the watch still cannot be found, please exit
and re-open the APP.
4. The connection status of the watch is as
shown in the
figures below:
Not connected
Connected
Note: The battery power will be shown as 5
different levels on the watch (0%-25%-50%-75%-
100%)

7
Operation
1. Open the control panel: Swipe the screen on
the main interface downwards from the top
2. Open the messages/notifications: Swipe the
screen on the main interface upwards from the
bottom
3. Open the main menu: Swipe the screen on
the main interface from left to right (Note: On
other interfaces, slide your finger from left to
right to return to the previous interface)
4. Open the status interface: Swipe the screen
on the main interface from right to left
5. Quick dial change: Press and hold the dial
interface for 3 seconds, and the watch vibrates
once; then you can slide your finger to left or
right to select the dial.
6. Power on: Press and hold the Power button
for 5 seconds
to switch it on (Power off: You need to press and
hold the button for 3 seconds when the display
is on to select whether to power off)
7. Quick sports pause/continue: Press the power
button.
8. Press the power button to return to the
homepage (Note: If you are on the level 2
interface, you will return to the level 1 interface).

8
Features
13 sport modes
(Running, Walking,
Cycling, Alpinism,
Yoga, Skipping, Tennis,
Baseball, Basketball,
Badminton, Football,
Rugby, Table Tennis)
In running, walking,
Alpinism and other
sports modes, you
can click the screen to
view the sports data
(steps, pace, calories,
distance and duration).
Heart Rate Monitor: The
watch will continuously
track your heart rate for
24 hours(Need
to turn on the “Heart
rate monitoring” in the
APP at first), you can
also view the
historical heart rate
data int he APP.
Note: When this feature
is enabled, the power
consumption will be
increased, and the
battery endurance will
be reduced.
Blood Oxygen Function:
The watch can track
oxygen in your blood.
Status Interface: The
steps, distance and
calories will be recorded
in detail and displayed
on watch everyday.
Sleep: The watch will
monitor your sleep
status from 6:00pm
to the 11:59 am of the
next day.

9
Music: The watch can be
used to control the
music player of the
mobile phone, you can
use it to play/pause or
skip songs (it is only
compatible with the in-
built music player
of the mobile phone,
may not
be compatible with third
party’ s player, and the
volume cannot be
adjusted
on the watch)
The watch will
receive and display
texts/messages/ social
media notifications
from your phone.
Setting: You can shut
down or reset the watch
from setting, and you
can also check the
info about the watch
and App download QR
code.
Charging
1. Place the watch on the magnetic charger,
please make sure the charging contacts on the
back of the watch are fully adsorbed the metal
contacts of the charger. It can be fully charged
within about 3.5 hours.
2. Plug the charging cable into a standard USB
charger purchased via official channels. The
output voltage is 5V and the output current is
1A.

10
If the watch cannot be turned on after being out
of use for a long time, please wipe the charging
contacts of the charging cable when using it
again to remove the sweat or moisture
residue.
Note: (If you do not use the watch often, please
charge it once every month.)
Basic parameters
Display
1.28inch TFT
240*240
Touch screen
Capacitive full touch
screen
Bluetooth BT5.0
Material of shell
Zinc alloy with
vacuum plating
Material of strap
Silicone rubber
Battery and
battery life
340mAh lithium
polymer battery
Standby time>30
days
Service time: 7 days
(with all features
on)
Button Power
button on side
Charging mode
Magnetic charging
Water-proofing
IP68 waterproof
level
Heart Rate Sensor
VC32S

11
Frequently Asked Questions
1. The watch cannot be connected to the
APP.(Or the watch can’t be found by the APP)
1.Please make sure the software version of your
smart phone is over Android 4.4 Or iOS 7.0.
2.Please check whether the watch was
connected to another phone or not, if yes please
unbind it at first.
3.Please make sure you have enabled the
Bluetooth function of your phone. (If it's still not
working, we recommend you to exit all of other
APP and reopen the Bluetooth function)
4.lf the watch still can’t be connected even after
trying the above steps, please exit the GloryFit
APP and restart the mobile phone and the
watch.
*Note :Some smart phones will not be
connected to the watch in low battery mode.
2. Can’t get any text/message on the watch
1.First, please make sure the Bluetooth function
is enabled on your mobile phone, and check
whether the watch is connected successfully
with your phone through the GloryFit
APP Then turn on the "Notifications reminders"
in the APP.
2.Then please check whether you give this APP
the permission to keep running in the
background on your mobile phone. If not,
please allow it to keep running in the
background.
3.And also check if the message can show up on
your phone's notification bar or not. If not,
please allow the APP notifications to pop-up in
the notification bar in the system setting:
Setting- Notifications- Notification style-Tick the
"Banners".

12
4. lf the messages can still not be displayed on
the watch even after trying the above steps,
please exit the GloryFit APP and restart the
mobile phone and the watch.
3. How to synchronize the watch data to my
phone?
1. Auto synchronization: When the watch is
connected to the APP, it will automatically
synchronize data.
2. Manual synchronization: After the watch is
connected to the
APP successfully, you can manually synchronize
the data by swiping down the screen from the
APP homepage or data interface.
3. lf the data cannot be synchronized, please try
to disable and enable the Bluetooth function
again on your mobile phone or restart your
mobile phone.
(Note: In case of any common problems in
operation, please refer to the Common problem
in My profile of the APP, which can help you
solve some problems) As shown in the figure
below:

13
Warranty Conditions
A new product purchased in the Alza.cz sales
network is guaranteed for 2 years. If you need
repair or other services during the warranty
period, contact the product seller directly, you
must provide the original proof of purchase with
the date of purchase.
The following are considered to be a conflict
with the warranty conditions, for which the
claimed claim may not be recognized:
•Using the product for any purpose other
than that for which the product is
intended or failing to follow the
instructions for maintenance, operation
and service of the product.
•Damage to the product by a natural
disaster, the intervention of an
unauthorized person or mechanically
through the fault of the buyer (e.g. during
transport, cleaning by inappropriate
means, etc.).
•Natural wear and aging of consumables
or components during use (such as
batteries, etc.).
•Exposure to adverse external influences,
such as sunlight and other radiation or
electromagnetic fields, fluid intrusion,
object intrusion, mains overvoltage,
electrostatic discharge voltage (including
lightning), faulty supply or input voltage
and inappropriate polarity of this voltage,
chemical processes such as used power
supplies, etc.
•If anyone has made modifications,
modifications, alterations to the design or
adaptation to change or extend the
functions of the product compared to the
purchased design or use of non-original
components.

14
EU Declaration of Conformity
We declare on our own responsibility that this
product complies with the provisions of
Directives 2014/53/EU and 2011/65/EU including
amendments 2015/863/EU.
WEEE
This product must not be disposed of as normal
household waste in accordance with the EU
Directive on Waste Electrical and Electronic
Equipment (WEEE - 2012/19 / EU). Instead, it
shall be returned to the place of purchase or
handed over to a public collection point for the
recyclable waste. By ensuring this product is
disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. Contact your local
authority or the nearest collection point for
further details. Improper disposal of this type of
waste may result in fines in accordance with
national regulations.

15
Uživatelská příručka k výrobku obsahuje funkce
výrobku, návod k použití a postup obsluhy.
Přečtěte si pozorně uživatelskou příručku,
abyste získali co nejlepší zkušenosti a předešli
zbytečným škodám. Tento návod si uschovejte
pro budoucí použití. Máte-li jakékoli dotazy nebo
připomínky k zařízení, obraťte se na zákaznickou
linku.
✉www.alza.cz/kontakt
✆[phone]
Dovozce Alza.cz a.s., Jankovcova 1522/53,
Holešovice, 170 00 Praha 7, www.alza.cz

16
Představení produktu
Nošení
Noste náramek asi jeden prst od zápěstní kosti a
nastavte jeho těsnost do pohodlné polohy.
Tip: Pokud budete mít řemínek příliš volný,
může to mít vliv na sběr dat ze snímače
srdečního tepu.
Řemínek
na zápěstí
Dotyková
obrazovka
Nabíjecí
kabel
Snímač
srdeční
ho tepu
Tlačítko napájení
(Stiskněte a
podržte tlačítko
napájení po dobu
5 sekund.
pro zapnutí
Stiskněte tlačítko
napájení
pro probuzení
obrazovky nebo
návrat do
předchozího
rozhraní)
Nabíjecí
kabel

17
Připojení a párování
1. Naskenujte QR kód na displeji hodinek
(Nastavení –Stažení aplikace) pomocí mobilního
telefonu a poté nainstalujte aplikaci GloryFit.
Můžete také naskenovat níže uvedený QR kód a
stáhnout a nainstalovat aplikaci GloryFit z
mobilního obchodu.
2. Po instalaci aplikace otevřete a přihlaste se do
aplikace GloryFit , poté na stránce zařízení
vyberte (zařízení KW66_, které má být přidáno),
abyste jej mohli připojit.

18
Tipy:
1. Při párování zkontrolujte, zda je v mobilním
telefonu povolena funkce Bluetooth, aby bylo
možné hodinky připojit k mobilnímu telefonu.
2. Pokud zařízení nelze v procesu párování najít
nebo pokud se zařízení nemůže během
používání připojit, klikněte na hodinkách na
"Nastavení –Reset" a zkuste párování spustit
znovu.
3. Pokud hodinky stále nelze najít, ukončete
aplikaci a znovu ji otevřete.
4. Stav připojení hodinek je takový, jak je
znázorněno na obrázku
níže uvedené údaje:
Nepřipojeno
Připojeno
Poznámka: Energie baterie se na hodinkách
zobrazuje v 5 různých úrovních (0 % - 25 % - 50
% - 75 % - 100 %).

19
Operace
1. Otevřete ovládací panel: Přejeďte prstem po
obrazovce hlavního rozhraní shora dolů.
2. Otevřete zprávy/oznámení: Přejeďte prstem
po obrazovce hlavního rozhraní zdola nahoru.
3. Otevřete hlavní nabídku: Přejeďte prstem po
obrazovce hlavního rozhraní zleva doprava
(Poznámka: V jiných rozhraních se posunutím
prstu zleva doprava vrátíte do předchozího
rozhraní).
4. Otevřete stavové rozhraní: Přejeďte prstem
po obrazovce hlavního rozhraní zprava doleva.
5. Rychlá výměna číselníku: Stiskněte a podržte
rozhraní ciferníku po dobu 3 sekund a hodinky
jednou zavibrují; poté můžete posunout prst
doleva nebo doprava a vybrat ciferník.
6. Zapnutí napájení: Stiskněte a podržte tlačítko
napájení po dobu 5 sekund.
pro zapnutí (Vypnout: Pro volbu vypnutí je třeba
při zapnutém displeji stisknout a podržet tlačítko
po dobu 3 sekund).
7. Rychlá sportovní pauza/pokračování:
Stiskněte tlačítko napájení.
8. Stisknutím tlačítka napájení se vrátíte na
domovskou stránku (Poznámka: Pokud se
nacházíte v rozhraní úrovně 2, vrátíte se do
rozhraní úrovně 1).

20
Funkce
13 sportovních režimů
(běh, chůze, jízda na
kole, alpinismus,
Jóga, Skipping, Tenis,
Baseball, basketbal,
Badminton, fotbal,
ragby, stolní tenis)
V režimech běh, chůze,
alpinismus a dalších
sportech můžete
můžete kliknutím na
obrazovku zobrazit
sportovní údaje (kroky,
tempo, kalorie,
vzdálenost a dobu
trvání).
Monitor srdečního tepu:
Hodinky budou
nepřetržitě sledovat vaši
tepovou frekvenci po
dobu 24 hodin
(Potřebujete-li
nejprve zapnout
"Sledování srdečního
tepu" v aplikaci APP),
můžete si také zobrazit
historické údaje o
srdeční frekvenci v
aplikaci APP.
Poznámka: Když je tato
funkce povolena,
napájení
spotřeba bude
a výdrž baterie se sníží.
Funkce kyslíku v krvi:
Hodinky mohou
sledovat obsah kyslíku v
krvi.
Stavové rozhraní: Kroky,
vzdálenost a kalorie
budou podrobně
zaznamenávány a
zobrazovány na
hodinkách každý den.