wurth Master STP 85 User manual

Bedienungsanleitung
Operating Instructions
Notice d’utilisation
Instrucciones para el manejo
Instruções de utilização
Istruzioni d‘uso
Gebruiksaanwijzing
Betjeningsvejledning
Bruksanvisning
Bruksanvisning
Käyttöohje
Οδηγίες χειρισµού
Kullanım kılavuzu
Pendelhubstichsäge STP 85
Pendelum Action Jigsaw STP 85
Scie sauteuse STP 85
Sierra de calar pendular STP 85
Serrote de ponta de curso pendular STP 85
Seghetto alternativo a lama oscillante STP 85
Pendeldecoupeerzaag STP 85
Pendulstiksav STP 85
Pendelsticksåg STP 85
Pendelstikksag STP 85
Heiluripistosaha STP 85
Σέγα µε ταλάντωση STP 85
Pendül hareketli dekupaj testeresi STP 85

0
15
30
45
15
30
45
1
WÜRTH • BA 702 635 X • STP 85 • OSW 11/01
1
3
4
5
6
7
8
9*
10
11
12
13
2
3
STP 85 - Bildseite1 Seite 4 Mittwoch, 17. September 2003 4:32 16

45
WÜRTH • BA 702 635 X • STP 85 • OSW 11/01
AB
CD
EF
14
15
13
16
17* 17*
STP 85 - Bildseite2 Seite 5 Mittwoch, 17. September 2003 4:32 16

11
WÜRTH • BA 702 635 X • STP 85 • OSW 11/01
Tool Specification
Pendulum Action Jigsaw STP 85
Part Number 702 635 X
Power input 580 W
Power output 350 W
Stroke rate at no load 500 – 3100 spm
Stroke 26 mm
Cutting ability
●in wood up to 85 mm
●in auminium up to 20 mm
●in stainless steel alloy/non-alloyed steel up to 10 mm/up to 3 mm
Bevel cuts (left/right) 0 – 45°
Weight (without accessories) 2.4 kg
Protection class /II
For Your Safety
Working safely with this machine is
possible only when the operating
and safety information are read com-
pletely and the instructions contained
therein are strictly followed.
The machine must not be damp and
must also not be operated in damp
surroundings.
Before each use of the machine, check
the cable and plug. If damage is de-
tected, do not use the machine. Have
repairs performed only by a qualified
technician. Never open the machine
yourself.
For the mounting and replacing of the
saw blade 9, wear protective gloves.
❏Wear protective goggles when working with ma-
terials which produce large amounts of chips.
❏For work which produces dust that is detrimental to
health, a dust protection mask should be worn.
Materials containing asbestos should not be
worked.
❏When working, never place a hand or fingers in
front of the saw blade.
❏The improper use of accessories which are not in-
tended for this machine type increases the danger
of an accident and can lead to damage to the ma-
chine
❏Connect machines that are used in the open via a
residual current circuit breaker with a triggering
current of 30 mA maximum. Use only extension
cables that are intended for outdoor use and are
protected against splash water.
❏When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
❏Always direct the cable to the rear away from the
machine.
❏Apply the machine to the workpiece only when
switched on.
❏The cutting path must be free of obstacles both
above and blow.
❏When sawing, the complete surface of the base
plate 5 should securely rest on the material. For the
working of smaller or thin workpieces, use a stable
foundation or a saw table (accessory).
❏When the cut is completed, switch off the machine
and then pull the saw blade out of the cut only after
it has come to a standstill (danger of kick-back).
❏After switching off, do not brake the saw blade to
a stop by applying side pressure.
❏Use only sharp, flawless saw blades. Replace im-
mediately cracked, bent or dull saw blades.
❏Do not drill into housing or attach rivets in order to
mark the machine. The double insulation is then no
longer ensured. Use stickers.
❏Use only original WÜRTH parts and accessories.
❏For further notes on safety refer to enclosed
Sheet
GB
STP 85 - GB Seite 11 Mittwoch, 17. September 2003 4:31 16

12
WÜRTH • BA 702 635 X • STP 85 • OSW 11/01
Operating Controls
1 Rotating handle with push-button
2 Thumbwheel for preselecting
3 Allen key
4 ON/OFF switch
5 Base plate
6 Adjusting lever for sawdust blower
7 Adjusting lever for pendulum lift
8 Guiding roller
9 Saw blade*
10 Lifting rod
11 Contact protector
12 Scale
13 Screw for footplate
14 Positioning pin
15 Bolt holes
16 Anti-splintering device
17 Circle cutter/Parallel guide*
*Accessory
*Not all of the accessories illustrated or described are included
as standard delivery.
Intended Use
The machine is intended for making separating cuts
and cutouts in wood, plastic, metal, ceramic plates
and rubber while resting firmly on the workpiece. It
is suitable for straight and curved cuts with mitre an-
gles to 45°.
The saw blade recommendations are to be observed
Inserting/Replacing the Saw
Blade
❏Before any work on the machine itself, pull the
plug from the socket!
The machine is equipped with a quick-clamping de-
vice. This makes possible easy and quick changing
of the saw blade without additional tools.
Before changing saw blade 9, set adjusting lever for
pendulum lift 7 to step III.
Depress the orange-coloured push-
button until it clicks into position
Turn clic handle 1 three rotations in
anti-clockwise direction
Insert saw blade 9 in blade holder 10
at a right angle to the cutting direc-
tion, turn saw teeth toward cutting di-
rection whilst raising blade slightly,
thus guiding the back of the saw
blade into the groove in guide roll-
er 8. Snap it into place with a light
tug.
Rotate clic handle 1 in clockwise di-
rection until a snap is heard (click).
Then push the orange-coloured push-
button back to the initial position.
Initial Operation
Always use the correct supply voltage: The power
supply voltage must match the information quoted
on the tool identification plate. Tools with a rating of
230 V can also be connected to a 220 V supply.
ON/OFF switch
Switching on: Slide ON/OFF switch 4 fowards
(position I = ON).
Switching off: Slide ON/OFF switch 4 backwards
(position 0 = OFF).
Stroke rate preselection
The required stroke rate can be preselected (also
during operation) using the thumbwheel 2.
1 – 2 = low stroke rate
3 – 4 = medium stroke rate
5 – 6 = medium stroke rate
The stroke rate required depends upon the material
and the working conditions. The optimal setting can
be determined in practice.
1.
2. 3x
3.
4. clic
5.
1
STP 85 - GB Seite 12 Mittwoch, 17. September 2003 4:31 16

13
WÜRTH • BA 702 635 X • STP 85 • OSW 11/01
Contact Protector
The contact protector 11 attached to the machine
prevents unintentional contact with the saw blade
while working.
Sawdust Blower
The sawdust blowing device directs a stream of air
at the saw blade. This prevents the cut line from be-
ing covered by sawdust while working. The air
stream can be adjusted to one of three levels with
adjustment lever 6:
Low blower: For work with metals and
when using coolants and lubricants;
for use with dust suction!
Moderate blower;
High blower: For working with wood
and similar materials.
Pendulum Action Setting
The saw blade pendulum action that
is adjustable in four steps makes pos-
sible the optimum adaptation of saw-
ing advancing (cutting speed), cutting
performance and cut appearance of
the material to be worked.
For each downward movement, the saw blade is lift-
ed off the material which facilitates sawdust ejection,
reduces heat generated by friction and increases the
service life of the saw blade. At the same time, the
reduction of the necessary advancing force makes
fatigue-free working possible.
The adjustment lever 7 makes possible the adjust-
ment of the pendulum action in four steps. The
switching can take place with the machine running:
Step 0:
No pendulum action
Step I:
Small pendulum action
Step II:
Medium pendulum action
Step III:
Large pendulum action
The following basic recommendations are to be ob-
served:
❏The finer and cleaner the cut edge should be, the
smaller the pendulum step selected should be or
switch off.
❏For the working of thin material such as sheet
metal, switch off the pendulum action (Step 0).
❏In hard material such as steel, work with a small
pendulum action.
❏In materials such as softwood and cutting in the
direction of the grain, the maximum pendulum
action can be used.
The optimal setting can be determined in practice.
Cutting Angle Adjustment
After screw 13 is loosened using Allen key 3 and
base plate 5 is slid toward the saw blade, the blade
can be swung left or right to 45°. Angles of 0°, 15°,
30° and 45° are indicated by the markings 12. In-
termediate settings are no problem.
After rough adjustment, tighten screw 13 until you
can still just move the base plate 5. Set cutting angle
precisely. Tighten screw 13.
The 0° position (saw blade vertical) is secured by po-
sitioning lobe 14 in the housing.
When tightening screw 13, press base plate toward
motor and against the positioning lobe
STP 85 - GB Seite 13 Mittwoch, 17. September 2003 4:31 16

14
WÜRTH • BA 702 635 X • STP 85 • OSW 11/01
Offsetting the Base Plate
(Figure A)
Use Allen key 3 to take out screw 13 completely.
Lift base plate and move it toward the rear, allowing
screw 13 to be screwed into rear socket 15. Run in
screw 13, press base plate in direction of motor,
against the positioning lobe, and tighten.
With the base plate offset, only the 0° (nor-
mal) position can be used.
The circle cutter/parallel guide 17 as well as
the splintering protector 16 cannot be used
in this case.
Splintering Protector (Figure B)
The anti-splinter shoe 16 prevents the surface from
being torn during sawing.
Press the anti-splinter shoe into base plate 5 from
below.
The splintering protector cannot be used for
certain saw blade types (e.g., saw blades
with set).
Application Tips
Circle cutter/Parallel guide
(Accessory - Fig. C/D)
With the combined circle cutter/parallel guide 17
(Part-Nr. 702 642 001) you can make circular cut-
outs or parallel cuts in materials of up to 30 mm
thickness.
For tight-radius curves it is best to use a narrow saw
blade.
Apply coolant or lubricant to deal with the heat pro-
duced along the cut line when sawing metal.
Plunge Sawing
Only soft materials such as wood, aerated
concrete, plaster board, etc. may be worked
with the plunge method.
Cut-outs in wood are possible without predrilling by
piercing with the running machine. This requires a
certain amount of practice, however, and is possible
only with short saw blades.
Place the front edge of the base plate on the work-
piece and switch on. Press the machine firmly
against the workpiece and plunge the saw blade
slowly into the workpiece (fig. E).
After reaching the required cutting depth, bring the
machine again to the normal working position so
that the complete surface of the base plate rests on
the workpiece and continue to saw along the cutting
line (fig. F).
After completing the cut, switch off the machine first
and then pull it out of the cut.
Removing rotating handle
Sawing in particularly confined positions can be fa-
cilitated by removing rotating handle 1. To remove
rotating handle depress the orange-coloured push-
button over the locking point and simultaneously pull
off the handle in an upward direction
Before fitting rotating handle 1, push the orange-
coloured push-button back to the initial position.
Place on rotating handle 1 and depress until it clicks
into position.
Maintenance and Cleaning
❏Before all work on the machine, pull the plug from
the socket!
❏Always keep the machine and the ventilation slots
clean.
In extreme operating conditions (e.g. when
working with non-ferrous metals) the interi-
or of the machine can become blocked with
cuttings. In such cases it is recommended to
use a stationary extractor, reduce the clean-
ing cycles and connect an earth-leakage cir-
cuit-breaker.
Guide roller 8 should occasionally be checked for
wear and lubricated with a drop of oil. If, after a
long period, it should display extensive wear, it must
be replaced by a professional or at an authorised
Würth Service Station for electric tools.
If the machine should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorised customer services
agent for Würth power tools.
For all correspondence and spare parts orders, al-
ways include the 7 digit order number of the ma-
chine!
☞
STP 85 - GB Seite 14 Mittwoch, 17. September 2003 4:31 16

15
WÜRTH • BA 702 635 X • STP 85 • OSW 11/01
Environmental Protection
Recycling raw materials instead of
waste disposal
Machine, accessories and packaging
should be sorted for environment-
friendly recycling.
These instructions are printed on recycling paper
manufactured without chlorine.
The plastic components are labelled for categorized
recycling.
Guarantee
For this Würth machine, we provide a guarantee in
accordance with statutory/country-specific regula-
tions from the date of purchase (proof of purchase
by invoice or delivery note). Damage that has oc-
curred will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can be recognised only when the machine is
presented undisassembled to a Würth branch office
or a Würth field service employee.
Noise/Vibration Information
Measured values determined according to
EN 50 144.
Typically the A-weighted sound pressure level of the
tool is 83 dB (A). The noise level when working can
exceed 85 dB (A).
Wear ear protection!
The typical hand-arm vibration is below 2.5 m/s2.
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents:
EN 50 144 according to the provisions of the regu-
lations 89/336/EEC, 98/37/EC.
01
Adolf Würth GmbH & Co. KG
ppa. M. Wölfle R. Bauer
Subject to change without notice
STP 85 - GB Seite 15 Mittwoch, 17. September 2003 4:31 16

Würth
worldwide:
Würth Albania Ltd.
Rr. Asim Vokshi
Pall 49/1 Ap. 9
AL-Tirana
Albania
Tel. ++355/42/29748
Fax. ++355/42/29748
[email protected]
Würth Armenia Co. Ltd.
63 Tigran Mets Ave.
AM-375005 Yerevan
Armenia
Tel. ++3741/559970
Fax. ++3741/559972
[email protected]
Würth Handelsges.m.b.H.
Würth Strasse 1
AT-3071 Böheimkirchen
Austria
Tel. ++43/2743/70700
Fax. ++43/2743/70703333
[email protected]
Würth Australia Pty Ltd
4 Redwood Drive
AU-Dingley VIC 3172
Australia
Tel. ++61/3/95517244
Fax. ++61/3/95512994
[email protected]
Wurth Aztur Ltd
Mir Galal Str.63.
AZ-370134 Baku
Azerbaijan
Tel. ++994/12/601934
Fax. ++994/12/601934
[email protected]
Wurth BH d.j.l.
Dzemal Biedia 162
BA-71000 Sarajevo,BIH
Bosnia
Tel. ++387/33/461770
Fax. ++387/33/461825
Würth Belux N.V.
Everdongenlaan 29
BE-2300 Turnhout
Belgium
Tel. ++32/14/445566
Fax. ++32/14/423077
[email protected]
Wuerth Bulgaria EOOD
Iskarsko Chaussee Boul. 12
BG-1592 Sofia
Bulgaria
Tel. ++359/2/9659955
Fax. ++359/2/9659966
[email protected]
Würth Belarus Ltd.
Botanitscheskaja Str. 5a-603
BY-220038 Minsk
Belarus
Tel. ++375/172/363919
Fax. ++375/172/852512
[email protected]
Würth AG
Dornwydenweg 11
CH-4144 Arlesheim
Switzerland
Tel. ++41/61/7059111
Fax. ++41/61/7059494
[email protected]
Würth Guangzhou
International Trading Co., Ltd.
Room 601, North Tower,
Nantian Building,
3 Jiangong Road
Tianhe High and New
Technology
Industry Development Zone
CN-510665 Guangzhou
China
Tel. ++86/20/85552840
Fax. ++86/20/855550245
[email protected].
cn
Würth Hong Kong Co. Ltd.
Unit B 6/f Prince Ind Bidg
106 King Fuk St.,
San Po Kong, Kowloon
CN-Hong Kong
China
Tel. ++8/52/27508118
Fax. ++8/52/27530084
[email protected]
Wuerth China-Shanghai
Langsheng Trading Co., Ltd.
2nd Floor (West)
No. 18 Factory Site
No. 481 Gui Ping Road
CN-200233 Shanghai
China
Tel. ++86/21/64951418
Fax. ++86/21/64848610
[email protected]
Würth Tianjin International
Trade Co., Ltd.
Jie Fang Nan Lu Str. 518-1
CN-300221 Tianjin
China
Tel. ++86/22/88242263
Fax. ++86/22/88243813
[email protected]
Wuerth Cyprus LTD
Strovolos industrial estate
P.O. Box 8899
CY-2083 Nicosia
Cyprus
Tel. ++357/2/512086
Fax. ++357/2/512091
[email protected]
Würth, spol. s r.o.
Sazecská 2
CZ-10800 Praha 10
Czech Republic
Tel. ++420/2/72106111
Fax. ++420/2/72106119
[email protected]
Adolf Würth GmbH
& Co. KG
Postfach
D-74650 Künzelsau
Reinhold-Würth-Str. 12-16
DE-74653 Künzelsau
Germany
Tel. ++49/7940/15/0
Fax. ++49/7940/15/1000
[email protected]
Würth Danmark A/S
Montagevej 6
DK-6000 Kolding
Denmark
Tel. ++45/79/323232
Fax. ++45/75/517250
Würth Estonia AS
Liimi 3 A
EE-10621 Tallinn
Estonia
Tel. ++372/6563509
Fax. ++372/6563494
[email protected]
Würth Egypt for Trading
S.A.E.
27th. Km Alexandria Cairo
Desert Road, Behind Mercedes
EG-Amriya Alexandria
Egypt
Tel. ++2/03/4700432
Fax. ++2/03/4700432
[email protected]
Würth España S.A.
Poligono Riera de Caldes
Carrer Dels Joiers 21-23
ES-08184 Palau de Plegamans
Barcelona
Spain
Tel. ++34/93/8629500
Fax. ++34/93/8646203
[email protected]
Würth Oy
Herajoki
FI-11710 Riihimäki
Finland
Tel. ++358/19/7701
Fax. ++358/19/729010
Würth France S.A.
Z.I. Ouest
Rue Georges Besse
FR-67158 Erstein Cedex
France
Tel. ++33/3/88645300
Fax. ++33/3/88646200
Wurth U.K. Ltd.
1 Centurion Way
Erith
GB-Kent DA 18 4 AE
Great Britain
Tel. ++44/208/3196000
Fax. ++44/208/3196400
[email protected]
Würth Georgia Ltd.
Marshal Gelovani Avenue 36
GE-380059 Tbilisi
Georgia
Tel. ++995/32/530610
Fax. ++995/32/250610
[email protected]
Würth Hellas S.A.
23. Klm. National Road
Athens-Lamia
145 68 Krioneri Attikis
P.O. Box 51877
Attikis
GR-145 02 Agios Stefanos
Attikis
Greece
Tel. ++30/1/6290800
Fax. ++30/1/8134756
[email protected]
Würth- Hrvatska d.o.o.
Franje Lucica 23/III
HR-10000 Zagreb
Croatia
Tel. ++385/1/3498784
Fax. ++385/1/3498783
[email protected]
Würth Szereléstechnika KFT
Gyár utca 2
HU-2040 Budaörs
Hungary
Tel. ++36/23/418130
Fax. ++36/23/421777
[email protected]
PT Wuerth Indah
JI. Meruya Ilir Raya No. 82 A-B
ID-Jakarta 11360
Indonesia
Tel. ++62/21/5860036
Fax. ++62/21/5861043
[email protected]
Würth Ireland Ltd.
Monaclinoe Industrial Estate
Ballysimon Road
IR-Limerick
Ireland
Tel. ++353/61/412911
Fax. ++353/61/412428
Würth Israel Ltd.
Alon Hatavor 2
Zone 1
IL-Caesarea Industrial Park
P.O. Box 3585
IL-Caesarea Industrial Park
Zip 38900
Israel
Tel. ++972/4/6273939
Fax. ++972/4/6270999
Wuerth India Pvt. Ltd.
33, Santosh Building,
Marol Co-operative Industrial
Estate,
M V Road, Andheri (East)
IN-Mumbai 400 059
India
Tel. ++91/22/8507023
Fax. ++91/22/8507020
[email protected]
Würth Teheran Ltd.
Pasdaran St.-Corner of
Negarestane 5-No.183
IR-16619 Teheran-Iran
Iran
Tel. ++98/21/2842828
Fax. ++98/21/2856171
[email protected]
Würth á Íslandi ehf.
Veslurhraun 5
IS-210 Gar
∂ abær
Iceland
Tel. ++354/5302000
Fax. ++354/5302001
[email protected]
Würth S.r.l. - GmbH
Enzenbergweg 2
IT-39018 Terlan (BZ)
Italy
Tel. ++39/0471/900111
Fax. ++39/0471/900444
[email protected]
Wurth-Jordan Co. Ltd.
Al-yadoudeh
P.O. Box 951
JO-Amman-11592
Jordan
Tel. ++962/6/4122512
Fax. ++962/6/4122510
[email protected]
Würth Japan Co., Ltd.
MT Building
33 Sanmaicho, Kanagawa-ku
JP-Yokohama 221-0862
Japan
Tel. ++81/45/4884186
Fax. ++81/45/4884187
[email protected]
[email protected]
Würth Nippon GmbH
& Co. KG
6F Tsuruga Bldg., 1-29-15
Shinyokohama, Kohoku-Ku
JP-Yokohama 222-0033
Japan
Tel. ++81/45/4704633
Fax. ++81/45/4704621
[email protected]
Wuerth Kenya Ltd.
P.O. BOX 16751
Meru Road
KE-Mombasa
Kenya
Tel. ++254/11/312403
Fax. ++254/11/312437
[email protected]
Würth Foreign Swiss
Company Ltd.
3 Erkindik Boulevard
KG-Bishkek, 720040
Kyrgyzstan
Tel. ++996/312/227976
Fax. ++996/312/661025
[email protected]
Würth Kosova
No. 36 Pashe Dibra
Bregu i diellit
Prishtina
Tel. ++377/44/186514
[email protected]
Wurth Korea Co. Ltd.
128-1, O-Keum Dong,
KR-Song Pa-Gu, Seoul, Korea
(138-859)
South Korea
Tel. ++82/2/4009311
Fax. ++82/2/4009315
[email protected]
Wuerth Kazakhstan Ltd.
Abai 125, 2nd floor
KZ-480008, Almaty
Kazakhstan
Tel. ++7/3272/622432
Fax. ++7/3272/622495
[email protected]
Würth Lietuva
Dariaus ir Gireno 21
LT-2038 Vilnius
Lithuania
Tel. ++370/2/263045
Fax. ++370/2/264108
[email protected]
Würth Reinsurance
Company, S.A.
B.P. 2217
L-1022 Luxembourg
Siège social
65, Avenue de la gare
LU-1611 Luxembourg
Tel. ++352/494177
Fax. ++352/494188
Würth Maroc SARL
48 Avenue Pasteur
MA-Casablanca 20150
Marocco
Tel. ++212/2/2405700
Fax. ++212/2/2405706
Würth Moldova Ltd.
b-dul Stefan cel Mare, nr 4
Hotel National
MD-Chisinau
Moldavia
Tel. ++373/2/540398
Fax. ++373/2/540398
Würth Makedonien GmbH
ul. Gorce Petrov 108a
MK-91000 Skopje
Macedonia
Tel. ++389/233/2230
Fax. ++389/233/2083
[email protected]
Würth Caraibes Sarl
Z.I. Cocotte Canal
MQ-97224 Ducos-Martinique
Tel. ++596/560701
Fax. ++596/564369
[email protected]
Würth Limited
Würth House
Triq il- Masgar
MT-Qormi QRM09
Malta
Tel. ++356/494604
Fax. ++356/441081
[email protected]
Wuerth (Malaysia) Sdn.
Bhd.
6, Jalan Permas 9/13
Taman Permas Jaya
MY-81750 Masai Johor
Malaysia
Tel. ++60/7/3876280
++60/7/3881712
Fax. ++60/7/3884391
[email protected]
Würth Nederland B.V.
Moeskampweg 13
NL-5222 AW 's-Hertogenbosch
Postbus 344
NL-5201 AH 's-Hertogenbosch
Netherlands
Tel. ++31/73/6291911
Fax. ++31/73/613137
[email protected]
Würth Norge AS
Postboks 84
NO-1483 Skytta
Morteveien 12, Gjellerasen
Naeringspark
NO-1481 Hagan
Tel. ++47/670/62500
Fax. ++47/670/62711
[email protected]
Würth New Zealand Ltd.
42 Hobill Avenue,
P.O. Box 97079
Manukau City
NZ-South Auckland/Mail
Centre
New Zealand
Tel. ++64/9/2623040
Fax. ++64/9/2623030
[email protected]
Wuerth Philippines, Inc.
Air-Rich Building
Km. 19.5 East Service Road,
South Expressway
PH-Parañaque City,
Philippines
Tel. ++63/2/8382697
Fax. ++63/2/8382195
[email protected]
Würth Polska Sp. z o.o.
ul. Plochinska 33
PL-03-044 Warzawa
Poland
Tel. ++48/22/819041
Fax. ++48/22/8117190
[email protected]
Würth Portugal Tecnica
de Montagem, Ldo.
Estrada Nacional, 249-4
Abrunheira
P-2710-089 Sintra
Portugal
Tel. ++351/21/9157200
Fax. ++351/21/9151038
[email protected]
Würth Romania S.R.L.
Zapada Mielior 16-18
Sector 1
P.O. 18-85
RO-Bucarest 71529
Romania
Tel. ++40/1/2323282
Fax. ++40/1/2328933
[email protected]
Wuerth Mittelrussland
c/o Logovaz
Transportnaja Ul. 20
RU-394043 Voronezh
Russia
Tel. ++7/0732/727065
Fax. ++7/0732/727065
[email protected]
Würth Irtysch
Ul. Dobrovolskogo 8/1
RU-644099 Omsk
Russia
Tel. ++7/3812/245291
Fax. ++7/3812/245291
[email protected]
Würth Russia
Bulwar Generala
Karbyschewa, 8, Of.504
RU-123154 Moskau
Russia
Tel. ++7/095/9468028
Fax. ++7/095/9468028
[email protected]
Würth Nordkaukasus Ltd.
Krasnoarmejskaja Str. 206
RU-344010 Rostow am Don
Russia
Tel. ++7/8632/618051
Fax. ++7/8632/618054
[email protected]
ZAO Wuerth-Siberia
Serebrennikovskaja, 14, of. 501
RU-630007 Novosibirsk
Russia
Tel. ++7/3832/234673
Fax. ++7/3832/234673
[email protected]
Würth St. Petersburg
Prospekt Dunaiski 68
RU-192 288 St. Petersburg
Russia
Tel. ++7/812/1726166
Fax. ++7/812/1726085
[email protected]
ZAO Wuerth-Ural
Institutskaja, 6, of. 202
RU-620016 Ekaterinburg
Russia
Tel. ++7/3432/432393
Fax. ++7/3432/432393
[email protected]
ZAO Wuerth-Volga
Novosadovaja st., 221, of. 205
RU-443011 Samara
Russia
Tel. ++7/8462/703252
Fax. ++7/8462/703252
[email protected]
Würth Svenska AB
Würth´s väg
Hjälmarberget
Box 1705
SE-70117 Örebro
Sweden
Tel. ++46/19/351000
Fax. ++46/19/351001
Würth Singapore Pte. Ltd.
Bukit Batok central Post Office
P.O. box 365
SG-Singapore 916513
Tel. ++65/487/4238
Fax. Box 1705
Würth d.o.o.
Plemljeva 86
SI-1210 Ljubljana
Slovenia
Tel. ++386/1/5128690
Fax. ++386/1/5121472
[email protected]
Würth s.r.o.
Pribylinská ul. c. 2
SK-83104 Bratislava
Slovakia
Tel. ++421/7/49201211
Fax. ++421/7/49201299
[email protected]
Wuerth Verbindungs-
technik Co., Ltd.
41/198 Sukhontasawad Road
TH-Ladprao Bangkok 10230
Thailand
Tel. ++66/2/9078880
Fax. ++66/2/9078877
[email protected]
Würth Otomotiv ve Montaj
San. Ürün. Paz. Ltd. Sti.
Eski Silivri Caddesi No. 22
TR-34900 Mimarsinan
Büyükcekmece
Turkey
Tel. ++90/212/8634603
Fax. ++90/212/8634608
[email protected]
Wurth Taiwan, Co., Ltd.
4th Fl., 28 Lane 80,
Sec. 3 Nan-Kang Rd.,
TW-Taipei, Taiwan, R.O.C.
Taiwan
Tel. ++886/2/27857122
Fax. ++886/2/27857027
[email protected]
Würth Ukraine Ltd.
Maschynobudiwna, 44
UA-Kiew 03680
Ukraine
Tel. ++380/44/4465376
Fax. ++380/44/4466467
[email protected]
Würth Central Purchasing
America, Inc.
91 Grant Street
US-Ramsey, NJ 07446
USA
Tel. ++1/201/9951111
Fax. ++1/201/9959908
Würth Technik
Halklar Dustligi 132-1
UZ-706800 Nawoi
Uzbekistan
Tel. ++998/79/2235207
Fax. ++998/79/2235207
[email protected]
Cong ty TNHH Vu Viet
9/3 Ly Van Phuc-
Tan Dinh Ward- Dist 1
VN- Ho Chi Minh City
Vietnam
Tel. ++84/8/8205635
Fax. ++84/8/8205634
[email protected]
Wurth d.o.o. za trgovinu
montaznom opremom
Zrenjaninski put 153 h
YU-11211 Beograd
Yugoslavia
Tel. ++381/11/3320198
Fax. ++381/11/3320242
[email protected]
Würth South Africa Co (Pty)
Ltd.
P.O. Box 616
ZA-Isando 1600
South Africa
Tel. ++27/11/9747191
Fax. ++27/11/9746169
[email protected]
For more countries and information see
http://www.wuerth.com

Niederlassungen:
Aachen
Jülicher Straße 236-248
52070 Aachen
Telefon [phone]
Telefax (02 41) 5 68 79 50
Aalen
Robert-Bosch-Straße 47
73431 Aalen
Telefon [phone]
Telefax (0 73 61) 92 30 50
Augsburg
Flotowstraße 15
86368 Gersthofen
Handwerk Metall:
Telefon [phone]
Telefax (08 21) 2 97 61 50+51
Bad Mergentheim
Industriepark Würth, Gebäude 1
97980 Bad Mergentheim
Telefon [phone]
Telefax (0 79 31) 92 40 59
Balingen
Schweizerstraße 70
72336 Balingen-Engstlatt
Eröffnung: Ende 2001
Bamberg
Biegenhofstraße 24
96103 Hallstadt
Eröffnung: Ende 2001
Bayreuth
Hasenweg 6
95448 Bayreuth
Telefon [phone]
Telefax (09 21) 7 92 05 50
Berlin
Spandauer Damm 60-64
14059 Berlin-Charlottenburg
Telefon [phone]
Telefax (0 30) 32 67 83 51
Berlin
Grenzgrabenstraße 4
13053 Berlin-Hohenschönhausen
Telefon [phone]
Telefax (0 30) 98 60 01 55
Berlin
Symeonstraße 10
12279 Berlin-Marienfelde
Telefon [phone]
Telefax (0 30) 72 09 03 50
Berlin
Osramhöfe
Seestraße/Oudenarderstraße 16
13347 Berlin-Reinikendorf
Telefon [phone]
Telefax (0 30) 45 08 27 53
Biberach
Riss-Center
Riss-Straße 19
88400 Biberach
Telefon [phone]
Telefax (0 73 51) 5 87 98 50
Bielefeld
Obere Hillegosser Str. 37
33699 Bielefeld
Telefon [phone]
Telefax (05 21) 9 24 18 27
Bochum
Harpener Feld 27
44805 Bochum
Telefon [phone]
Telefax (02 34) 3 38 85 51
Böblingen
Hanns-Klemm-Straße 46
71034 Böblingen-Hulb
Telefon [phone]
Telefax (0 70 31) 2 11 76 50
Brandenburg
Geschwister-Scholl-Str. 36
14776 Brandenburg a. d. Havel
Telefon [phone]
Telefax (0 33 81) 2 52 00
Braunschweig
Hansestraße 66
38112 Braunschweig
Telefon [phone]
Telefax (05 31) 3 54 78-90
Bremen
Gewerbegebiet Bayernstraße
Straubinger Straße 11
28219 Bremen
Handwerk Metall:
Telefon [phone]
Telefax (04 21) 3 99 88 51
Chemnitz
Gewerbegebiet
Südring/Neefestraße
Carl-Hamel-Straße 5
09116 Chemnitz
Telefon [phone]
Telefax (03 71) 2 71 47 50
Cottbus
Gewerbegbiet
An der Reichsbahn
Am Gleis 15
03042 Cottbus-Sandow
Telefon [phone]
Telefax (03 55) 7 56 61 50
Crailsheim
Industriegebiet Zur Flügelau
Roßfelder Straße 60
74564 Crailsheim
Telefon [phone]
Telefax (0 79 51) 96 37 50
Darmstadt
Weiterstadt Park
Brunnenweg 19
64331 Weiterstadt
Telefon [phone]
Telefax (0 61 50) 18 18 50
Dortmund
Wilhelmstraße 35A
59439 Holzwickede
Telefon [phone]
Telefax (0 23 01) 91 26 50
Dresden
Malterstraße 37
01159 Dresden
Heizung/Sanitär:
Telefon [phone]
Telefax (03 51) 4 14 53-50
Düsseldorf
Lierenfelder Straße 53
40231 Düsseldorf
Postfach 105 532
40046 Düsseldorf
Telefon [phone]
Telefax (02 11) 9 73 06 50
Erfurt
Über dem Feldgarten 11
99198 Erfurt-Linderbach
Telefon [phone]
Telefax (03 61) 4 20 57 50
Essen
Heinz-Bäcker-Straße 15
45356 Essen
Telefon [phone]
Telefax (02 01) 8 66 45 50
Esslingen
Plochinger Straße 45
73779 Deizisau 1
Eröffnung: Ende 2001
Frankfurt
Daimlerstraße 19
63110 Rodgau
Handwerk Metall:
Telefon [phone]
Telefax (0 61 06) 84 01 51
Frankfurt II
Hanauer Landstraße 338
60314 Frankfurt/Main
Eröffnung: Ende 2001
Frankfurt/Oder
Gewerbegebiet Markendorf
Bertha-von-Suttner-Straße 14
15236 Frankfurt/Oder
Telefon [phone]
Telefax (03 35) 5 21 88 50
Freiburg
Industriegebiet Nord
Mitscherlichstraße 5
79108 Freiburg
Handwerk Metall:
Telefon [phone]
Telefax (07 61) 5 59 66 50
Gera
Gewerbegebiet Bieblach Ost
Heinz-Hertz-Straße 14
07552 Gera
Telefon [phone]
Telefax (03 65) 4 37 28 50
Gießen
Gewerbegebiet Gießen-West
Robert-Bosch-Str. 16
35398 Gießen
Telefon [phone]
Telefax: (06 41) 9 62 36 50
Göppingen
Industriegebiet Ost
Heilbronner Straße 12
73037 Göppingen
Telefon [phone]
Telefax (0 71 61) 6 89 00
Goslar
Gewerbegebiet Baßgeige
Alte Heerstraße 15
38644 Goslar
Telefon [phone]
Telefax (0 53 21) 3 51 93 50
Halle (Saale)
Delitzscher Straße 70
06112 Halle (Saale)
Telefon [phone]
Telefax (03 45) 5 75 56 54
Hamburg
Industriegebiet Nettelkrögen
Gutenbergring 44
22848 Norderstedt
Telefon [phone]
Telefax (0 40) 53 43 61-50
Hamburg-Süd
Helmspark Hittfeld
Helmsweg 6-16
22218 Seevetal-Hittfeld
Telefon [phone]
Telefax (0 41 05) 58 44 50
Hannover
Gewerbegebiet Godshorn
Bayernstraße 37
30855 Langenhagen-Godshorn
Telefon [phone]
Telefax (05 11) 7 86 80 50
Heilbronn
Dieselstraße 8
74076 Heilbronn
Telefon [phone]
Telefax (0 71 31) 95 56 50
Ingolstadt
Eriagstraße 8
85053 Ingolstadt
Telefon [phone]
Telefax (08 41) 9 31 87 51
Jena
Löbstedter Straße 80
07749 Jena
Telefon [phone]
Telefax (0 36 41) 45 12 50
Karlsruhe
Printzstraße 2a
76139 Karlsruhe
Handwerk Metall:
Telefon [phone]
Telefax (07 21) 6 25 22 50
Kassel
Industriegeb. Waldau West
Otto-Hahn-Str. 18
34123 Kassel
Telefon [phone]
Telefax (05 61) 9 98 68 50
Kempten
Messerschmittstraße 16
87437 Kempten
Telefon [phone]
Telefax (08 31) 5 74 48 50
Kiel
Seekoppelweg 7a
24113 Kiel
Telefon [phone]
Telefax (04 31) 6 47 40 50
Koblenz
Auf dem Hahnenberg 51
56218 Mülheim-Kärlich
Telefon [phone]
Telefax (0 26 30) 94 70 50
Köln
Köhlstraße 43
50827 Köln-Ossendorf
Telefon [phone]
Telefax (02 21) 95 64 42 50
(08 00) 8 65 13 90
Künzelsau-Gaisbach
Verkaufsniederlassung
Schliffenstraße 22
74653 Gaisbach
Telefon [phone]
Telefax (0 79 40) 15 45 55
Leinfelden
Sielminger Straße 65
70771 Leinfelden-Stetten
Eröffnung: Ende 2001
Leipzig
Zum Bahnhof 20
04178 Leipzig/Rückmarsdorf
Telefon [phone]
Telefax (03 41) 4 90 14 40
Würth Service-Container
Am Airport 2000
Postfach 12 44
04029 Leipzig
Telefon [phone]
Telefax (03 41) 2 24 19 77
Funk (01 70) 6 33 70 73
Leonberg
Hertichstraße 10
71229 Leonberg-Eltingen
Telefon [phone]
Telefax (0 71 52) 9 28 24 29
Ludwigsburg
Mörikestraße 28/1
71636 Ludwigsburg
Telefon [phone]
Telefax (0 71 41) 56 46 99
Lübeck
Taschenmacherstraße 10
23556 Lübeck
(Roggenhorst-Nord)
Telefon [phone]
Telefax (04 51) 8 71 92 50
Magdeburg
Silberbergweg 29
39128 Magdeburg
Telefon [phone]
Telefax (03 91) 2 55 87 50
Mannheim
Fraunhoferstraße 7
68309 Mannheim
Telefon [phone]
Telefax (06 21) 7 27 46 50
Minden
Ringstraße 49-51
32427 Minden
Telefon [phone]
Telefax (05 71) 3 98 38 53
Mönchengladbach
Gewerbegebiet Engelbleck
Borsigstraße 13
41066 Möchengladbach
Telefon [phone]
Telefax (0 21 61) 4 77 69 50
(08 00) 7 24 16 70
München
Am Lenzenfleck 2
85737 Ismaning
Handwerk Metall:
Telefon [phone]
Telefax (0 89) 96 07 03 50
München 2
Ridlerstraße 65
80339 München
Telefon [phone]
Telefax (0 89) 43 19 72 50
Münster
Harkortstraße 11
48163 Münster
Telefon [phone]
Telefax (02 51) 71 76 31
Neubrandenburg
Gerstenstraße 2
17034 Neubrandenburg
Telefon [phone]
Telefax (03 95) 4 30 48 50
Nordhausen
Freiherr-vom-Stein-Straße 32
99734 Nordhausen
Telefon [phone]
Telefax (0 36 31) 47 89 50
Nürnberg
Lenkersheimer Straße 16
90431 Nürnberg
Handwerk Metall:
Telefon [phone]
Telefax (09 11) 9 31 92-50
Offenburg
Robert-Bosch-Straße 2
77656 Offenburg-Elgersweier
Telefon [phone]
Telefax (07 81) 9 69 84 50
Oldenburg
Ammerländer Heerstaße 246
26129 Oldenburg
Telefon [phone]
Telefax (04 41) 77 74 61
Olpe
Industriegebiet Auf der Mark
Glück-Auf-Weg 3
57482 Wenden-Gerlingen
Telefon [phone]
Telefax (0 27 62) 98 94 56
Osnabrück
Hettlicher Masch 12
49084 Osnabrück
Telefon [phone]
Telefax (05 41) 9 09 01 50
Paderborn
Frankfurter Weg 70-72
33106 Paderborn
Telefon [phone]
Telefax (0 52 51) 8 73 67 50
Passau
Regensburger Straße 14
94036 Passau
Telefon [phone]
Telefax (08 51) 9 56 62 50
Pforzheim
Gewerbegebiet
Wilferdinger Höhe
Rastatter Straße 36
75179 Pforzheim
Telefon [phone]
Telefax (0 72 31) 56 87 99
Potsdam
Am Verkehrshof 1
14478 Potsdam
Telefon [phone]
Telefax (03 31) 8 88 84 50
Regensburg
Franz-Hartl-Straße 4
93053 Regensburg
Handwerk Metall:
Telefon [phone]
Telefax (09 41) 7 83 98 50
Reutlingen
Industriegebiet West
Ferdinand-Lasalle-Straße 55
72770 Reutlingen
Handwerk Metall:
Telefon [phone]
Telefax (0 71 21) 56 95 50
Rodgau
siehe bei Frankfurt/Main
Rosenheim
Isarstraße 1a
83206 Rosenheim
Eröffnung: Ende 2001
Rostock
Gewerbegebiet
Neu-Roggentiner Straße 4
18184 Roggentin
Telefon [phone]
Telefax (03 82 04) 6 16 50
Saarbrücken
Im Rotfeld 21
66115 Saarbrücken
Handwerk Holz/Bau:
Telefon [phone]
Telefax (06 81) 9 48 65-50
Schwäbisch Hall
Industriegebiet Hessental-Ost
Schmollerstraße 41
74523 Schwäbisch Hall
Telefon [phone]
Telefax (06 91) 4 07 23 50
Schwerin
Robert-Stock-Straße 6
19061 Schwerin
Telefon [phone]
Telefax (03 85) 6 46 71 50
Siegen
(Kaan-Marienborn)
Hauptstraße 84
57074 Siegen
Handwerk Metall:
Telefon [phone]
Telefax (02 71) 6 60 49 20
Sinsheim
In der Au 22
74889 Sinsheim
Telefon [phone]
Telefax (0 72 61) 40 21 50
(Eröffnung ca. Nov. 2001)
Stuttgart
Kölner Straße 10
Hallschlag
70376 Stuttgart
Handwerk Metall:
Telefon [phone]
Telefax (07 11) 9 55 73 50
Trier
Ohmstraße 6-8
54292 Trier
Telefon [phone]
Telefax (06 51) 4 36 99 50
Ulm/Neu-Ulm
Carl-Zeiss-Straße 3
89231 Neu-Ulm
Telefon [phone]
Telefax (07 31) 9 78 98 50
Urbach
Schorndorfer Straße 22
73660 Urbach
Telefon [phone]
Telefax (0 71 81) 48 86 56
Villingen-Schwenningen
Industriegebiet Vockenhausen
Heinrich-Hertz-Straße 9
78052 VS-Villingen
Telefon [phone]
Telefax (0 77 21) 87 19 50
Weingarten/Ravensburg
Hähnlehofstraße 5
88250 Weingarten
Telefon [phone]
Telefax (07 51) 55 15 03
Wiesbaden
Hagenauer Straße 17-19
65203 Wiesbaden
Handwerk Metall:
Telefon [phone]
Telefax (06 11) 1 86 97 50
Wuppertal
Industriegebiet
Nächstebreck
Möddinghofe 21
42279 Wuppertal
Holz/Bau:
Telefon [phone]
Telefax (02 02) 6 47 71 25
Würzburg
Gewerbegebiet Ost
Sandäcker 11
97076 Würzburg
Telefon [phone]
Telefax (09 31) 2 79 89 18
Adolf Würth GmbH & Co. KG
Postfach ·74650 Künzelsau ·Telefon [phone] ·Telefax (0 79 40) 15 10 00
Internet: http://www.wuerth.com ·e-mail: [email protected]
702 635 X BA 1101 - Printed in Germany - Imprimé en Allemagne MWV-OSW-01/11 • © by Adolf Würth & Co. KG • Nachdruck, auch auszugsweise, nur mit Genehmigung.
2 609 932 162