Xiaomi Aqara User manual

Vibration Sensor

Aqara Hub is required to enable Aqara Vibration Sensor to work
with HomeKit technology. See www.aqara.com for more details.
*
This product is for indoor use only.*
A hub is required.*
English
Vibration Sensor Quick Start Guide
Aqara Vibration Sensor is embedded with a high
precision acceleration sensor and it detects the
vibration and movement of objects. It communicates
with the Hub via Zigbee protocol. It also works with
other smart accessories to set various smart scenes,
such as, local and remote alarm when it detects glass
breaks.
Indicator Light
Reset Button
Long Press for 5s: Reset
Single Press: Effective Range Test
Product Introduction

English
Quick Setup
Effective Range Test: Single press the reset button on
the accessory at your desired position. If the Hub makes
voice prompts, it indicates that the accessory can
communicate effectively with the Hub.
Installation
Option 1: Place it directly in the desired position.
If the connection fails, please move the accessory closer to the
Hub and try again.
*
Please add the Hub to the app according to the Hub
Quick Start Guide.
1.
2. Please open the app, tap “Home” and then tap “+” in
the top right corner to enter “Add Device (Accessory)”
page. Select “Vibration Sensor”, and add it according
to instructions.
Avoid metal surface to maximize signal strength.*

English
Model: DJT11LM
Dimensions: 36 × 36 × 9 mm (1.42 × 1.42 × 0.35 in.)
Wireless Protocol: Zigbee
Battery: CR2032
Operating Temperature: -10° – +50° C
Operating Humidity: 0 – 95% RH, no condensation
Specifications
Keep the surface clean and dry.*
Remove the protective film, and stick it to the
desired position.
Option 2:

English
Online Customer Service: www.aqara.com/support
Email: [email protected]
Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling
Road, Liuxian Ave, Taoyuan Residential District, Nanshan
District, Shenzhen, China.