Xiaomi Mi Powerbank 5000 User manual

Mi Powerbank 5000
Read the manual before use the device!
7. List of Faults6. Warranty
Warranty service is carried out in
accordance with the law on «the rights
of consumers of China» and «The
PRC Law of the products quality.» The
warranty service includes:
During the warranty period you have the
right to repair, exchange or return an
item. For repair, replacement or return of
goods you need to present an invoice.
1. Within 7 days from the date of
purchase, in case of a problem of «faults
list» Xiaomi service center determines
the cause of the problem, then you can
choose a free replacement, returning or
repair.ing of a product.
2. Within 8-15 days from the date of
purchase, in case of a problem of «faults
list» Xiaomi service center denes a
problem, and then you choose a free
replacement or repairing of goods.
3. Within 12 months from the date of
purchase, in case of a problem of «faults
list» Xiaomi service center denes
the problem, then you are get a free
repairing.
8. Warranty rejection terms
-The completion of maintenance, fall,
neglect, abuse, liquid ingress, accident,
breaking, or if the label and marking of
device is spoiled;
- The warranty period has expired;
- Damage caused by force majeure;
- Damage that do not meet «faults list»
of Xiaomi service center;
- Failure of the device or its components
from the «List of faults», which arose in
connection with the human factor, and
which prevent to a normal operation.
(It`s necessary to keep the packaging
unit, it may need to service center
consultant in case you have to contact
them)
9. Warning
This device is equipped with a lithium-
ion battery, than it`s strictly prohibited to
disassemble the enclosure to prevent
damage to the battery or other damage.
It is strictly forbidden any dismantling,
squeezing, pricking device; also not
allowed to put it into water or re, or
expose it to temperatures above 60 ° C.
10. Warning!
1. Before the rst use of the battery,
charge it fully.
2. When using the battery needed to
display digital device caught re, it will
point to the correct operation of the
device.
3. To charge this battery, or to charge
other devices via the battery, you can
choose its own cable.
4. If, during charging of the digital
device ceased to burn all LED
indicators, which means that in a
portable battery charge is not enough.
Please charge it more quickly.
5. When you connect a digital device to
the battery, it directly uses the charge of
the battery.
6. After a full charge the battery,
immediately disconnect it from the
electricity supply.
7. Due to the short circuit of the battery
or for other reasons at the time of the
introduction of protection mode (after
pressing the «stop work», LED display
does not appear), you must use an
external charger to continue charging
and the battery life will be restored.
http://xiaomi-mi.com
1. About device 2. About device
Safety: Portable Mi battery has a
different degrees of protection; whether
charged or discharged, it is in standby
mode. The battery can easily pass a
charge, over-discharge the batteries,
high temperature, circuit, and many
other unusual circumstances, and
provides reliable protection for your
digital portable equipment.
High performance: Extremely fast
charging, high current output 5.1V / 2
1A, ultra-high conversion rate (5.1V / 1A
conversion factor of more than 93%).
Compatibility: Built-in Smart
USB compatible battery provides
compatibility with many different
devices, especially with Samsung and
BlackBerry, which are not compatible
with many portable power supplies.
Quality: The battery of the best
international companies supplying the
rst class batteries.
Thank you for choosing our products.
This device - a portable battery with
a high capacity. The device use the
best international company supplying
batteries with a rst class chip. It has
special performance metrics: safety,
efciency, compatibility and other
aspects.
3. Basic parameters
Battery Type: Li-ion Battery
Power: 3.7V / 5,000 mAh (TYP)
Operating temperature range: 00C -
45C
Size: 125 x 69 x 9,9
Output voltage: DC5.1V
Input voltage: DC 5.0V
Output current 2100 mA (TYP)
Input Current: 2000 mA (TYP)
Charging time: about 3.5 hours
(charger 5V / 2A standard cable), about
5,5 hours (charger 5V / 1A, standard
cable)
4. Battery 5. Charging of other devices
Connect Mi adapter
to the power adapter
to charge it.
During charging,
the status indicators
show the level of
charge as follows:
Use a USB cable to connect other
digital devices to charge them.
When discharge, the status lights
indicate remaining battery level as
follows:
XIAOMI-MI.COM