Xiaomi Mi Power Bank Pro PLM03ZM User manual

This version is for private use only and should not be distributed.
Mi Power Bank Pro User Manual

This version is for private use only and should not be distributed.
01
Please read the user manual before using the product
Specifications
Model: PLM03ZM
Baery type: Li-polymer
Cell capacity: 10000mAh 3.85V (38.5Wh)
Operating temperature: 0°C~45°C
Dimensions: 128.5×75×12.6mm
Input: 5.0V 2.0A 9.0V 2.0A 12V 1.5A
Output: 5.0V 2.4A 9.0V 2.0A 12V 1.5A
Charging time: approx. 3.5 hours (9V/2A or 12V/1.5A adapter,
standard cable),
approx. 5.5 hours (5V/2A adapter, standard cable)
Product Introduction
Thank you for choosing Mi Power Bank Pro. The product is a high-capacity portable
charger that uses Li-polymer baeries and TI chips for a safe, efficient, and compatible
user experience.
Product Features
Safety: Mi Power Bank Pro has multiple safeguard technologies to provide over-charge,
over-discharge, high temperature, and short circuit protection in all working conditions.
Efficiency: Supports fast charging and discharging at 5.0V 2.4A 9.0V 2.0A 12V
1.5A output.
Compatibility: The product has a built-in USB charging controller, compatible with most
smartphones, tablets, and devices. It supports mainstream fast charging devices, and
can boost to 9V/12V.
Quality: Li-polymer baeries and TI chips.

This version is for private use only and should not be distributed.
02
Note:
The Power check buon is not a Power buon. Mi Power Bank Pro detects charging and
discharging automatically. The Power indicator turns off 2 minutes aer discharging is
completed.
USB (Output)
Type C (Input) Power Indicator
Power Check
Connect with Mi AC Adapter to charge Mi Power Bank Pro.
The indicator shows charging conditions as follows:
Charging
Power Level LED1 LED2 LED3 LED3
Fully Charged
75-96%
50-75%
25-50%
0-25%
Charging Error Blinking
Blinking
On
On
On
On
Blinking
Blinking
On
On
On
Off
Blinking
Blinking
On
On
Off
Off
Blinking
Blinking
On
Off
Off
Off
LED1
LED3 LED2
LED4

This version is for private use only and should not be distributed.
03
Notes
Please make sure to fully charge Mi Power Bank Pro on its first use.
When charging a device with Mi Power Bank Pro, please check whether your device
displays the baery charging icon to confirm that Mi Power Bank Pro is working
properly.
When charging Mi Power Bank Pro or charging a device with Mi Power Bank Pro, please
be sure to use the right charging cable.
When all indicator LEDs lights go out, Mi Power Bank Pro is in low power mode. Please
recharge as soon as possible.
When charging a device with Mi Power Bank Pro, the device will use Mi Power Bank
Pro's baery first.
Once your device is fully charged, please disconnect it from Mi Power Bank Pro to avoid
further discharge.
When the product enters protection mode (LEDs don't light up aer pressing the Power
check buon) due to output short circuit or other reasons, please charge Mi Power
Bank Pro with an external charger to resume.
Warnings
Mi Power Bank Pro contains Li-ion baeries. Do not open the casing to avoid baery
damage or other dangers.
Please do not dismantle, press, puncture and short circuit Mi Power Bank Pro, or expose
the product to liquids, fire, or environments where temperature is higher than 60°C
(140°F).

This version is for private use only and should not be distributed.
04
Connect with Mi Power Bank Pro to charge your device.
The indicator shows discharging conditions as follows:
Discharging
Power Level LED1 LED2 LED3 LED4
Undervoltage
Blinking
Off
Blinking
Blinking
Blinking
Off
Off
Blinking
Blinking
Blinking
Off
Off
Off
Blinking
Blinking
Off
Off
Off
Blinking
Off
* Small current discharge: when Mi Power Bank Pro is not charging, double press the
Power check buon to enter Small current discharge mode to charge small devices,
such as Bluetooth headphones and smart bands.
The indicator LEDs will turn on one by one in succession, indicating that Mi Power Bank
Pro has entered Small current discharge mode.
To exit Small current discharge mode, press the Power check buon once.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
BC
75-96%
50-75%
25-50%
0-25%

This version is for private use only and should not be distributed.
05
About anti-counterfeit labels
Anti-counterfeit labels are placed on the outer packaging of every certified 10000mAh Mi
Power Bank Pro. Please scratch the coating to see the verification code, and check if the
product is genuine on this website: hp://www.mi.com/verify
To promote environmental protection,
Xiaomi avoids excessive packaging.
Principal: Xiaomi Communications Co., Ltd.
Manufacturer: Zimi Corporation (a Mi Ecosystem company)
Address: 159 Chengiang Road Unit A913, Jiangyin City, Jiangsu, China
Anti-counterfeit label
Scratched off label