XPower FM-65B User manual

Rechargeable Air Circulator / Misting
Fan Owner's Manual
Model / Modelo / Modèle
FC-125B, FC-150B, FM-65B, FM-65WB, FT-65WB
(115V~, 60HZ)
Read and save these instructions
Lea y guarde estas instrucciones
Lisez et gadez ces instructions
www.xpower.com | 1-(855)-855-8868 | [e-mail]
Index: NA-1-A35
Edition: 5.2.Final
Circulador de Aire / Ventilador con Nebulizador Recargable Manual de Usuario
Ciculateur d'Air / Brumiventilateur Rechargeable Manuel d'Emploi

English - 2
Safety Instructions
!WARNING - READ AND SAVE THIS INSTRUCTIONS BEFORE USING THIS PRODUCT.
The user of electrical products may create hazards that include, but are not limited to
injury, fire, electrical shock. Failure to follow these instructions may damage and/or
impair its operation and void the warranty.
• Before operating, remove all packaging material and check for any damage that may
have occurred during shipping or any missing items.
• Check household power supply to ensure it matches the appliance’s specification.
• DO NOT operate any fan with a damaged cord or plug. Discard fan or return it to an
authorized service facility for examination and/or repair.
• Use only on GFCI protected receptacles. Please contact a qualified electrician for
verification and / or installation of a GFCI receptacle if necessary.
• DO NOT run cord under carpeting. DO NOT cover cord with throw rugs, runners, or
similar coverings. DO NOT route cord under furniture or appliances. Arrange cord away
from traffic area and where it will not be tripped over.
• To reduce the risk of fire or electric shock, DO NOT use this fan with any solid-state
speed control device.
• DO NOT touch this appliance or the plug with wet hands or while standing in water.
• DO NOT operate the appliance in any pooled water.
• DO NOT use the product in areas where gasoline, paint or other flammable goods and
objects are used or stored.
• DO NOT insert or allow objects to enter any ventilation or exhaust opening as this may
damage the appliance and void the warranty.
• DO NOT cover the air inlet or outlet on the appliance.
• DO NOT direct the air flow at human faces or bodies.
• DO NOT allow children to play with this appliance.
• AUTOMATICALLY OPERATED DEVICE – To reduce the risk of injury, disconnect from
power supply before servicing.
• Remove the power cord from the electrical receptacle by grasping and pulling on the
power cord plug-end only, DO NOT pull the cord directly.
• DO NOT attempt to repair or adjust any electrical or mechanical functions of this
appliance, as this may cause danger and void the warranty.
• If the appliance is damaged or it malfunctions, DO NOT continue to use it. Unplug the
product from the electrical outlet. Refer to troubleshooting guide or contact XPOWER.
• Store in a dry area, away from exposure to sunlight, extreme temperature and humidity,
or other extreme environments, when not in use.
• DO NOT disassemble the battery. If the machine or battery malfunctions, refer to the
Troubleshooting Guide.
• CAUTION: To reduce the risk of electric shock, connect only to an outlet provided with
a ground fault circuit interrupting device.
• A battery operated fan with integral batteries or a separate/detachable battery pack

English - 3
Items Included
AxialFanOwner's Manual
XXXManualDeUsuario (página 10)
XXXModed'emploi(page 18)
Model/Modelo / Modèle:
P-80Series,P-100 Series, P-200 Series
(115V60HZ)
Readandsavethese instructions before use
Leayguardeestas instrucciones antes de usar la unidad
Lireetconserverces instructions avant utilisation
www.xpower.com|1-(855)-8868| [email protected]
Index:NA-1-A2
Edition:1.0.Alpha
• Owner’s
Manual x 1
• Rechargeable Air Circulator
/ Misting Fan x 1
shall be recharged only with the specified charger for the battery. A charger that may
be suitable for one type of battery may create a risk of fire when used with another
battery.
• Use battery operated fan only with specifically designated battery pack. Use of any
other batteries may create a risk of fire.
• Outdoor use.• DO NOT incinerate this fan, even if it is severely damaged. The batteries can explode
in a fire. Dispose of the fan in accordance with Battery Maintenance. (See Page 9:
Battery Maintenance).
• An electronic instruction manual can be obtained through manufacturer’s website
www.xpower.com.
Product Introduction
• XPOWER Rechargeable Air Circulators / Misting
Fan are designed to offer efficient air circulation
and ventilation with its high and long-distance
focused airflow and/or fine mist cooling.
• It’s perfect for air circulation and ventilation in
janitorial/sanitation jobs, air condition control
and/or more.
• Car Charger
x 1**
• AC Charger x 1*
* For model FC-125B / FM-65B only / ** For model FC-125B only
*** For model FM-65B, FM-65WB and FT-65WB only
• Misting Nozzle
x 4***
• Nozzle Cleaner
x 1***

English - 4
Installation and Operation Guide
Parts Description
Speed Switch*
Speed Switch**
/ Battery Case**
Rack
Handle
Inlet Grill
Cover
Rack
Handle
Outlet
Grill Cover
Timer Switch*
Battery
Case*
Misting
Nozzle****
AC
Charger**
Water
Hose****
Car
Charger***
Battery Indicator
Light* Battery Indicator Light**
* For model FC-150B only / ** For model FC-125B / FM-65B only
*** For model FC-125B only / **** For model FM-65B, FM-65WB and FT-65WB only
Install the Misting Nozzle (For Model FM-65B / FM-65WB / FT-65WB Only)
• Screw the misting nozzle onto
the nozzle adapter for misting
function.

English - 5
Water Source Connection (For Model FM-65B, FM-65WB and FT-65WB Only)
Water Faucet
Water Swtich
Open
Close
For Model FM-65B:
• Screw the water faucet adapter onto the water faucet.
• Turn the switch to desired position to open or close the valve.
• Turn on the water faucet.
For Model FM-65WB and FT-65WB:
• The misting fan must connect to a container with water as a source of water.
• You can choose your own container or use XPOWER Water Tank for fast and
convenient connection.
Pumping
Hose
Connect to a Bucket
• Put the end of the pumping
hose into a bucket.
• Put the unit onto the bucket.
• The bucket must be in an
upper diameter less than
11.8 inches.

English - 6
Switch Plate
OFF
MAX
MIN
Variable Speed Switch
• Turn to “OFF” position to switch the machine OFF. Turn
clockwise to any position between “MAX” and “MIN” to
switch the machine ON.
• You can adjust to any desired speed variably. “MAX” is
the highest speed and “MIN” is the lowest speed.
Pumping
Hose
Connect to WT Series
• Put the end of the pumping
hose through a small hole
into the WT Series.
• Put the into the slot of the
WT Series.
If you want to fill the container with a solution / liquid other than water:
• IMPORTANT: Always disconnect the machine from the power source before
filling the solution.
• Do not exceed the maximum capacity of the container. For WT Series, it’s
suggested to fill 80% of the maximum capacity.
• WARNING: Filling these types of solution / liquid into the solution tank may
cause safety hazards, corrosive damages to the machine or blockage of the
atomization assembly:
(1) Strong acids, strong bases or other corrosive liquids
(2) Alcohol, or flammable or explosive liquids
(3) Oil, or other organic oils
(4) Liquids containing particles or sediments
(5) Detergents
• IMPORTANT: If you intend to fill the solution of the types mentioned above,
please contact the manufacturer of the solution for usage reference and proper
methods of cleaning.

English - 7
• Turn clockwise to set timer for minutes count down to an
automatic stop.
• The timer can be set for up to 180 minutes (3 hours).
• When the timer reaches “0” position, the unit stops
working. On “ON” position, it will work constantly.
Timer Switch (For Model FC-150B Only)
120
60
0
ON
180
Water Pump Control Panel (For Model FM-65WB Only)
Water Pump Speed Switch
• Press to switch the speed of the water pump.
• There are 3 water pump speeds from: 1, 2, 3. “1” is the lowest speed and “3” is the
highest speed.
Water Pump Timer
• Press to set the timer for an automatic stop of the water pump. The timer controls the
water pump only.
• There are three timers from: 0.5 h, 1 h, 2 h.
• However, if the timer is not set, the water pump will stop working after 4 hour for model
FM-65WB.
• When the water pump stops working, press the button to turn on the water pump or set
the timer again.
• This light indicates the life of the battery.
Battery Indicator Light

English - 8
AC CHARGER
(Model: HCX3601-1202200U)
• For use on a nominal 115 V circuit
(NEMA 1-15R or NEMA 5-15R)
CAR CHARGER
(Model: NB-1201200)
• For use on a 12 V auxiliary car
power outlet / cigarette lighter
receptacle
Machine
Charging Port
Switch Plate
Instructions for FC-125B, FM-65B, FM-65WB, FT-65WB:
• Connect the charger to the power source. The power indicator light on the
charger (if applicable) will display green.
• Then connect the charger to the machine. The power indicator on the charger
(if applicable) will display red. When the battery is charging, all the bars of the
battery indicator light will shine green.
• When the battery is fully charged, the power indicator light on the charger (if
applicable) will display green.
• IMPORTANT: Please turn the unit off (in the “OFF” position) before charging.
Instructions for FC-150B:
• Connect the power plug to the power source.
• When the battery is charging, all the bars of the battery indicator light will shine
green.
• IMPORTANT: This unit operates normally when the unit is charging.
Charging the Battery
• WARNING: DO NOT use unoriginal chargers or power adapters to charge the battery,
as this may cause malfunction or permanent damage to the battery or other related
safety concerns.
• IMPORTANT: Please charge the battery fully to activate the battery before initial use.
• IMPORTANT: To avoid the battery working on low capacity condition and encountering
permanent damage, it’s recommended to charge the battery fully before each usage.

English - 9
• This machine provides a USB dedicated charging port (DCP, Type A, 5 V/1 A) only for
purpose of charging or powering USB devices.
• WARNING: Please use certified USB devices only on the charging port, otherwise it
may cause malfunction or permanent damage to the battery or other related safety
concerns.
USB Charging Port (For Model FC-125B / FM-65B / FM-65WB Only)
USB Charging Port USB Plug
USB Type A (5 V/1 A)
Switch Plate
Transportation
Lift with Handle
• Lift the Air Circulator with the handle on
the top.

English - 10
Adjusting the Operation Position
• The Air Circulator features 360° Rotation. Tilt Air Circulator to desired angle and
screw on rack handles to secure the position.
User Maintenance Instructions
Frequent maintenance is recommended on this appliance. Failure to follow the
maintenance instructions may cause failure of the appliance and void the warranty.
• When not in use, unplug and store the appliance in a dry and cool indoor place. Make
sure it’s out of reach of children.
• Before performing any maintenance or cleaning, always disconnect the Air Circulator
from its power source.
• Use a damp cloth to wipe the surface of the housing. Do not clean the unit with water
directly.
• Check if the grille covers are clean. Remove dirt or any other objects that could block
the air inlet and air outlet.

English - 11
• To prevent possible injury, when
you finish using this appliance,
please position the Air Circulator
UPRIGHT.
• Fasten the rack handle to lock the
position of the Air Circulator.
Fasten the Rack Handles
For Model FC-150B:
• Wrap the power cord around the housing.
• Clip the cord to the cord clip on the plug shown above.
Organize the Power Cord / Water Hose
For Model FM-65B/FM-65WB/FT-65WB:
• Wrap the water hose around the housing.
• Use convenient clip on the housing to secure in place.

English - 12
Atomization Assembly Maintenance (For Model FM-65B/FM-65WB/FT-65WB Only)
Battery Maintenance
When not in use for a long time, please charge the battery until full before storage. It’s
recommended to charge the battery at least 1 time for every 3 months.
This product uses lithium-ion (Li-ion) batteries. The battery is integral and generally not
removable by user. Local, state, or federal laws may prohibit disposal of batteries in
ordinary trash. Please follow below instructions:
Disposal or Recycling through XPOWER (Recommended):
By being serviced only through XPOWER or an XPOWER authorized party, the battery will
be recycled or disposal in a proper and responsible manner.
If you want to dispose or recycle the battery by yourself (Not Recommended), please:
(1) Before disposal or recycle of the battery, you should discharge and disconnect the
battery in a proper and safe way. Consult XPOWER or an XPOWER authorized party for
discharge or disconnection methods of the battery.
(2) Consult your local waste authority for information regarding available recycling and/or
disposal options.
(3) Afterwards, during disposal or recycle:
(3.1) Always consult and obey all international, federal, provincial/state, and local
hazardous waste disposal laws. Some jurisdictions require recycling of this spent
product. Battery recycling is encouraged.
(3.2) Refer to the Safety Data Sheet of the battery (if applicable).
(3.3) To prevent short circuits and the associated heating up, battery packs may never
be stored or transported unprotected in loose bulk.
Warning:
• DO NOT attempt to destroy, remove or disassemble the battery pack from the machine.
• Keep away from children. Failure to comply with these warnings could result in fire
and/or serious injury.
• DO NOT incinerate battery cells.
Cleaning the Container
• It’s recommend to clean the container after each usage.
• Remove all the liquid within the container and wash with cold water.

English - 13
• Disassemble the nozzles (See illustration above) and unscrew the water faucet
adapter.
• For model FM-68W, FM-68W, FT-68W or FT-88W, disassemble the pumping hose.
• Soak the parts with soapy water or mild (or alkaline) detergent for several hours.
DO NOT use vinegar or other acidic detergent.
• Optionally, use the nozzle cleaner to clean the nozzle hole from the inner surface.
• When finished, dry the surfaces completely and reassemble the parts.
PROBLEM POSSIBLE CAUSE SOLUTION
Machine does not
start
No electricity. Check for power supply.
The power cord is not properly
plugged in.
Remove and reconnect the
power cord.
The timer switch is set to “0”
position.
Set the timer switch to “ON”
position.
Battery is not activated yet. Please charge the battery
until to activate the battery
before the first usage.
Troubleshooting Guide
Cleaning the Atomization Assembly
When not in use, unscrew the misting nozzles, store the nozzles in a dry indoor
place out of reach of children. The nozzles must be dried completely before stored.

English - 14
If troubleshooting does not resolve your problem, please contact XPOWER or other
parties authorized by XPOWER for further instructions.
Technical Specication
PROBLEM POSSIBLE CAUSE SOLUTION
Machine does not
start
Low battery capacity. When the battery capacity
is 20% or lower, in order to
protect the battery, the preset
program will stop the machine
and prohibit the machine from
working again. (See Page 6:
Charge the Battery.)
Unit runs but the
speed or the sound
is abnormal
Air inlet or air outlet is blocked. Remove blockage.
Low battery capacity. When the battery capacity
is 20% or lower, in order to
protect the battery, the preset
program will stop the machine
and prohibit the machine from
working again. (See Page 6:
Charge the Battery.)
Misting function is
abnormal
The water hose is blocked. Remove blockage.
The atomization assembly is
blocked.
Remove blockage. (See Page
10: Atomization Assembly
Maintenance)
The water switch is off or no
water supply.
Check for water supply.
Atomization Specification
Misting Nozzle Max Mist Volume Max Throw Distance
FM-65B 0.3 mm (Marked 3010) 5.9 L / h 29.5 ft. / 9.0 m
FM-65WB
/ FT-
65WB 0.3 mm (Marked 3010) 7.5 L / h 29.5 ft. / 9.0 m

English - 15
MODEL NUMBER FC-125B FM-65B FM-65WB FT-65WB FC-150B
AC Charger
Specification
Input: 100-240 V~, 50/60Hz, 0.8 A - 1.2 A
Output: DC 12 V / 2.2A N/A
Car Charger
Specification
Input: DC 12-24
V / 1.5 A
Output: DC 12 V
/ 1.2 A
N/A
USB Output
Specification DC 5 V / 1 A N/A
Product Rating DC 12 V / 1.8 A DC 12 V / 2.5 A 115 V~, 60 Hz /
0.6 A
Battery Output N/A DC 26 V / 1.0 A
Motor Output
Power 22 W 30 W 26 W
Rated Airflow 900 CFM 1000 CFM
Speed Control Variable Speed
Timer N/A 0.5 - 1 - 2
Hour N/A 3 Hours (OFF)
Battery
Specification
Lithium Ion Battery
43 W·h
Lithium Ion
Battery
67 W·h
Run Duration ≈ 170 min - 18 Hour
≈ 100
min - 18
Hour
≈ 100
min - 5
Hour
≈ 170 min - 30
Hour
Recharge
Duration
≈ 3.5 Hour (with AC Charger)
4 Hour (with Car Charger) ≈ 3 Hours
Cord Length N/A 6 ft. / 1.8 m
Housing PP
Unit Dimension
(L) x (W) x (H) 16.1 x 8.9 x 14.2 in. / 41.0 x 22.5 x 36.0 cm
Unit Weight 9.44 lbs. / 4.28
kg 9.10 lbs. / 4.11 kg 10.50 lbs. / 4.78 kg 9.9 lbs. / 4.5 kg
Certification ETL / C-ETL
If your product(s) is not listed above, please visit www.xpower.com for more information.
Machine Specification

English - 16
XPOWER Limited Warranty (USA)
1 YEAR LIMITED WARRANTY
XPOWER-branded products purchased in the U.S. from authorized distributors include
a 1-year limited warranty. Contact XPOWER to confirm warranty information about your
product(s).
This limited warranty covers defects in materials and workmanship in your XPOWER-
branded products, purchased in the U.S. ONLY. Local warranty policy (if any) in your
country will cover products purchased outside the U.S.
Items mentioned but not limited to below are not covered by warranty:
(1) Power cord, filters or any other components considered as a “consumable parts” by
XPOWER.
(2) Normal wear and tear.
(3) Problems that result, directly or indirectly, at XPOWER’s sole discretion, from:
(3.1) External causes such as accident, abuse, misuse or problems with electrical power
supply.
(3.2) Disassembling, servicing or modification not authorized by XPOWER.
(3.3) Usage that is not accordant with product instructions stated in Owner’s Manual.
(3.4) Failure to follow the product instructions or lack of necessary maintenance stated
in Owner’s Manual.
Before contacting XPOWER, please try one or more of the following:
(1) Consult this Owner’s Manual and follow the instructions of troubleshooting guide.
(2) Access www.xpower.com for more advice and information that could be helpful to
address your problems.
If you need additional assistance from XPOWER, please:
(1) Email [e-mail].
(2) Call XPOWER U.S. Customer Service Department at 855-855-8868 or other numbers
provided on www.xpower.com.
(3) Visit XPOWER U.S. Head Office at 668 S. 6th Ave., City of Industry, CA 91746 or the
most current address provided on www.xpower.com.
Please also have your original proof of purchase and the serial number(s) of your
product(s) ready when you contact XPOWER.
IMPORTANT:
(1) Please finish the online warranty registration before usage. Visit https://xpower.
com/warranty-registration/
(2) This Limited Warranty applies with its own timeliness. Contact XPOWER or visit
www.xpower.com for more information.
!

English - 17
If you are instructed to return the unit for service or replacement, please:
(1) Request a RMA (Return-Merchandise-Authorization) number.
(2) Use the original or an equivalent packaging, prepay shipping charges at your own
expense to the address provided by XPOWER, with the RMA number on the shipping
label or the packaging.
(3) Include all the original parts and components.
XPOWER will inspect, assess and advise the repairs needed and applicable cost, if any.
For products under warranty, we will pay to ship the repaired or replaced product(s) to
you if you use an address within the Contiguous United States. Otherwise, we will ship
the product(s) to you at your own expense.
XPOWER Limited Warranty (USA)

English - 18

English - 19

Español - 2
Instrucciones de seguridad
!ADVERTENCIA: LEA Y GUARDE ESTE MANUAL ANTES DE USAR ESTE PRODUCTO.
El usuario de productos eléctricos puede crear peligros que incluyen, pero no se limitan
a, lesiones, incendios, descargas eléctricas. El incumplimiento de estas instrucciones
puede dañar y/o perjudicar su funcionamiento y anular la garantía.
• Antes de operar, retire todo el material de embalaje y compruebe si hay algún daño
que pudiera haber ocurrido durante el envío o cualquier artículo faltante.
• Revise la fuente de alimentación para asegurarse de que coincide con las
especificaciones del aparato.
• NO utilice ningún ventilador con un cable o enchufe dañado. Deseche el ventilador o
devuélvalo a un centro de servicio autorizado para su examen y/o reparación.
• Utilícelo únicamente en los tomacorrientes protegidos con interruptor de circuito
de falla a tierra (GFCI). Póngase en contacto con un electricista calificado para la
verificación y / o la instalación de un receptáculo GFCI si es necesario.
• NO coloque el cable debajo de la alfombra. NO cubra el cable con alfombras,
corredores o revestimientos similares. NO en rute el cable debajo de muebles o
aparatos. Coloque el cable alejado del área de tránsito o de paso y donde no se vaya a
tropezar.
• Para reducir el riesgo de incendio o descarga eléctrica, NO utilice este aparato con
ningún aparato de control de velocidad de estado sólido.
• NO toque este aparato ni el enchufe con las manos mojadas o mientras esté parado
en agua.
• NO utilice el aparato en agua estancada.
• NO utilice el producto en áreas donde se utilice o almacene gasolina, pintura u otros
bienes y objetos inflamables.
• NO inserte ni permita que objetos entren en ninguna abertura de ventilación o escape,
ya que podría dañar el aparato y anular la garantía.
• NO cubra la entrada o salida de aire del aparato.
• NO dirija el flujo de aire al rostro o cuerpo de personas.
• NO permita que los niños jueguen alrededor este aparato.
• APARATO DE FUNCIONAMIENTO AUTOMÁTICO – Para reducir el riesgo de lesiones,
desconecte la fuente de alimentación antes de realizar el mantenimiento.
• Retire el cable de alimentación del tomacorriente eléctrico agarrando y tirando
solamente del extremo del enchufe del cable de alimentación, NO tire del cable
directamente.
• NO intente reparar o ajustar cualquier función eléctrica o mecánica de este aparato,
ya que esto puede resultar peligroso y anular la garantía.
• Si el aparato está dañado o funciona mal, NO continúe su uso. Desconecte el producto
de la toma eléctrica. Consulte la guía de solución de problemas o póngase en contacto
con XPOWER.