XPower X-8 User manual

X-8 / X-12
(115V / 60Hz)
PROFESSIONAL
AXIAL AIR MOVER
OWNER’S MANUAL
4
com

Index
Introduction .....................................................................................................................................
Operation / Instructions ...................................................................................................................
Safety Instructions ..........................................................................................................................
Maintenance Instructions / Troubleshooting ...................................................................................
Specifications ..................................................................................................................................
Warranty / Service ..........................................................................................................................
Parts List .........................................................................................................................................
Accessories ....................................................................................................................................
Warranty Registration Form ...........................................................................................................
2
3
4
5
6
7
8
9
10
- 1 -

Introduction
XPOWER Axial Air Movers are ETL/CETL certified and offer complete control of air velocity and
volume. Designed with efficiency and flexibility of use in mind, both the X-8 and X-12 feature alow
amp draw and a powerful sealed motor to circulate air efficiently and effectively. The X-8 and X-12
function to deliver dry air to ventilate, create negative air pressure or simply to help complete any
drying process for a variety of surfaces. Optional duct hoses offer the flexibility to ventilate narrow
spaces up to 125 ft. Visit www.xpower.com to order additional parts and adapters.
Features:
• Low power draw with 1200CFM (X-8) & 2600CFM (X-12) when switched on high
• Super Quiet and Lightweight
• Variable Speed Control Switch
• Durable ABS Plastic Housing
• 20’ Power Cord
• Dual Thermal Protection
- 2 -

Operation Instructions
No assembly is required for this unit. Prior to operating always check that the power cord is not
frayed or compromised, the unit is completely dry, and there is not any debris which would
obstruct the motor and/or fan blades.
1. Plug the electrical cord into the power outlet.
2. Carefully place the Axial Air Mover unit on a stable,flat dry surface.
3. Turn the switch to desired speed and make sure it is operating correctly.
4. To reduce the risk of injury, close supervision is necessary when the unit is used near children.
Do not allow children to play with or around the unit.
- 3 -
• DO NOT OPERATE FAN WITHOUT REVIEWING COMPLETE
OPERATION AND SAFETY INSTRUCTIONS
• Incorrect operation of unit can result in property damage, personal injury,
or even death. This unit is NOT designed to operate in an explosive or
flammable environment
CAUTION!

Safety Instructions
1. To prevent electric shock, do not operate the unit in standing water. Never plug in or unplug
the unit with wet hands or while standing in water.
2. To avoid risk of injury, do not direct air flow at face or body.
3. Suitable for use with solid-state speed controls.
4. Use only with GFCI protected receptacles. Please contact a qualified electrician for
verification and / or installation of a GFCI receptacle if necessary.
5. Do not operate any unit with a damaged cord or plug. Discard axial air mover or return to an
authorized service facility for examination and/or repair.
6. This is an automatically operated device. To reduce the risk of injury disconnect from power
supply before servicing.
7. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic
area and where it will not be tripped over.
8. Do not allow children to play with or around an axial air mover at any time.
9. Do not move or carry the axial air mover while unit is operating.
10. Keep air intakes and exhausts clean at all times to avoid clogging or blocking in order to
prevent overheating the unit. Blocking the air intake could result in a fire or electrical hazards.
11. To prevent injury to persons and to avoid objects from coming in contact with the fan blade,
do not remove any screens or safety guards from this unit. Damage in this manner will void
your warranty.
12. Always place the axial air mover on a smooth and level surface for safe operation.
13. Do not use unit if defective or damaged.
14. Unplug the unit before performing any maintenance, cleaning, or servicing.
15. Any misuse or abuse of this product will void the warranty.
16. An electronic instruction manual can be obtained through www.xpower.com
- 4 -
• Always refer to OSHA and industry standards when determining how to
use unit for ventilation purposes.
• Avoid entering any confined area that has not yet been tested and proven
safe for work personnel.
DANGER!

Maintenance Instructions
1. To keep the unit clean, use a damp cloth to wipe the surface of the housing.
2. Never clean the Axial Air Mover directly with water.
3. When not in use, unplug and store the unit in a dry indoor place out of reach of children.
4. Always disconnect from its power source before performing any maintenance or cleaning.
Troubleshooting
Repairs: Any internal repairs should be performed by a qualified technician. Call your local
distributor or contact our Service Department at 626-285-3301.
- 5 -
SYMPTOM PROBABLE CAUSE ACTION
Switched Off
Make sure unit is plugged in
and switch is turned to ON
position.
Power failure Check outlet/Change to
another outlet
Wiring failure Contact XPOWER for repair
Obstructions at the
intake or exhaust of fan Remove obstruction(s)
Fan broken
Weak Air Flow Obstructed vents/inlets
Unplug unit to clean vents and inlets
Motor Not Running
Scraping Noise From Fan
Contact XPOWER for repair

Specifications
- 6 -
21-X8-XledoM
Power
Amp 2.5A 6A
Rated Airflow (High) 1200CFM 2600CFM
Speeds Variable Variable
RPM 1,100 / 3,100 1,100 / 3,200
Cord 20' / 18AWG 20' / 18AWG
Overheating Protection Dual Thermal Protection Dual Thermal Protection
Weight 13.5 lbs 23.4 lbs
Size(inches) (L x W xH) 13.6 x 11.1 x 15.4 inch. 15 x 13.6 x 18 inch.
Housing ABSABS
Safety ETL / C-ETL ETL / C-ETL
115V,60Hz,1/3HP 115V,60Hz,1/2HP

XPOWER Limited Warranty (USA)
XPOWER’s Limited Warranty covers the unit (excludes POWER CORD) from defects in material
and craftsmanship. The Warranty covers normal use for a term of one year from the original date
of purchase including parts, labor and one way shipping. Non-contiguous states must pay for
roundtrip freight. A purchase receipt must be provided.
Important!
This warranty does not cover or apply to defects due directly or indirectly to misuse, abuse,
disassembly, alteration, corrosive chemicals, improper voltage, fire, flood, negligence, accident,
improperly or incorrectly performed maintenance or repair, or failure to perform necessary
maintenance or repair, or if the use of this product is not in compliance with the instructions and
specifications for its use.
Service
For Warranty service and parts replacement (US users only), you must:
A. Call 1-855-855-8868 for a RMA (Return-Merchandise-Authorization) number.
B. Have original proof of purchase.
C. Use the original undamaged packaging or an industrial certified packaging method.
End user will be responsible to ship the unit (with RMA Number showing on the shipping label) to
the XPOWER Service Department. XPOWER to inspect, assess and advise the repairs needed
and the applicable cost, if any. For users outside the US, please contact XPOWER Distributor in
your country or region for Warranty service and parts replacement.
- 7 -

- 8 -
Parts List
1
.oNmetI.oNmetI
21
43
65
87
019 Power Cord Panel
Motor
Speed Switch
Fan
Capacitor
Label Panel
emaNstraPemaNstraP
Air Inlet / Outlet
Handle Cover
Housing
Power Cord
2
3
4
5
6
1
789
10

Accessories
Ducting Hose items listed below are available for purchase via www.xpower.com. Hoses can
extend air flow up to 125ft. Keep in mind that as the ducting hose length increases, the air flow
rate will decrease.
- 9 -
DUCTING HOSE
Item# Diameter Length
XPOWER 8DH25 8” 25’
XPOWER 12DH25 12” 25’
DUCTING HOSE CARRIER
XPOWER 8DHC (compatible with 8DH25)

Company Name / Contact Person / Title
State / Province Zip Country
Warranty Registration (for US user only)
For your product warranty, please complete and mail / fax this form to XPOWER MANUFACTURE, INC.
Address: 240 Clary Ave., San Gabriel, CA 91776. Tel: [phone] Fax: [phone]
(For your convenience, register your product online at xpower.com)

4