XPower X-400 User manual

XPOWER MANUFACTURE, INC.
220 Clary Avenue
San Gabriel, CA 91776, USA
Tel: [phone], Fax: [phone]
www.xpower.ws
PLEASE READ AND SAVE THESE INSTRUCTIONS
MULTI FUNCTIONAL BLOWER FAN
OWNER’S MANUAL
X-400 / P-400 / X-430

Index
Introduction ...............................................................................................................................
Operation / Instructions................................................................................................................
Safety Instructions......................................................................................................................
Maintenance Instructions / Troubleshooting...............................................................................
Specifications..............................................................................................................................
Warranty / Service .....................................................................................................................
Parts List ....................................................................................................................................
Accessories ...............................................................................................................................
Warranty Registration Form .......................................................................................................
2
3
4
5
6
7
8
9
10

Introduction
XPOWER Blowers / Fans are ETL & C-ETL Certified Professional Level Multi Functional
Blowers / Fans with the most efficient engineering design.
Features:
• Low 3 Amp draw with high velocity of over 1600 to 2000 CFM
• Super quiet and super light weight
• Easy clean filter system
• Easy carrying and stackable
• Easily disassembled for thorough cleaning and service
• 20 foot cord with easy cord wrap design
• Safety screens on open vents
• 3 speed switch
• 4 positions (0°, 20°, 45°, 90°)
• Durable and rugged housing with a 5 Year Warranty
0° 20° 45° 90°

The XPOWER High Velocity Blower / Fan is intended to move air
and to dry floors, walls, furniture etc. Durable and easy to operate
with an effective balance of static pressure and airflow suitable for
a variety of applications.
1.
2.
3.
4.
5.
6.
BLOWER / FAN
STORAGE
Stackable
Units can be
stacked (up to 4)
on their sides for
storage.
NOTICE:
1.Stacking
feature is not
secure for
transportation.
2.Remove the
filters before
stacking.
Operation / Instructions
XPOWER Blowers / Fans are shipped ready to be put into
service. Prior to plugging in the unit into the power source
inspect the unit completely for any shipping damage.
Plug the electrical cord into a 3-prong GFCI outlet.
Carefully place the Blower / Fan unit on a stable flat dry
surface.
The unit has a four position capability to aim airflow across flat
surfaces or angled upward.
Turn the switch to the desired speed and make sure it is
operating correctly．
All Blowers / Fans in operation must be supervised at all times.
Timer Instruction (Applicable for Model X-430)
Use the Timer to set the preferred time from
1 min to 180 min.
:

Safety Instructions
To prevent electric shock, do not operate unit in standing water. Never plug in or unplug the unit
with wet hands or while standing in water.
To avoid risk of injury, do not direct air flow at face or body.
To reduce the risk of fire or electric shock, do not use unit with any solid-state speed control
device.
Use only with GFCI protected receptacles. Please contact a qualified electrician for verification
and/or installation of a GFCI receptacle if necessary.
Do not operate any unit with a damaged cord or plug. Discard unit or return to an authorized
service facility for examination and/or repair.
Unplug the unit from the power source before servicing or cleaning.
Do not run the power cord under carpeting. Do not cover the power cord with throw rugs,
runners, or similar coverings. Place the power cord away from traffic area to prevent tripping.
Do not allow children to play with or around Blower / Fan.
Do not move or carry a Blower / Fan when unit is operating.
All Blower / Fan in operation must be supervised at all times.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

Maintenance Instructions
To keep the Blower / Fan clean use a damp cloth to wipe the surface of the housing.
Never clean the unit with water.
When not in use unplug and store the Blower / Fan in a dry indoor place out of reach of
children.
Always disconnect the XPOWER Blower / Fan from its power source before performing any
maintenance or cleaning.
Clean the filters (optional item) as often as necessary to avoid loss of airflow.
1.
2.
3.
4.
5.
PROBLEM POSSIBLE CAUSE SOLUTION
Blower / Fan not
running
No power input Plug in the blower; check circuit breaker
Switch not turned on Turn on switch
Unit fan jammed Remove material jamming fan wheel
Intake or exhaust blocked Turn unit off and allow to cool,
then remove blockage
Blower vibrates
excessively
Accumulation of dirt on fan blade Clean blower blade
Troubleshooting
For any problems not listed below, call your local distributor or contact our Service Department.

Specifications
Model X-400 P-400 X-430
Volt / Cycle 115V / 60Hz 115V / 60Hz 115V / 60Hz
Power 1/4 hp 1/4 hp 1/3 hp
Max Amp 3A 3A 3.8A
Weight 16 lbs 15 lbs 17 lbs
Speeds Three Three Three
Size (H x W x D) 15x 13.50 x 15 inch 15x 13.50 x 15 inch 15x 13.50 x 15 inch
Cord Length 20 ft 20 ft 20 ft
Overheating
Protecting Dual Thermal Protectors Dual Thermal Protectors Dual Thermal Protectors
Rated Airflow (On High) 1600 CFM 1600 CFM 2000 CFM
Positions 4(0°, 20°, 45°, 90°) 4(0°, 20°, 45°, 90°) 4(0°, 20°, 45°, 90°)
Housing ABS PP ABS
Safety Marks ETL / C-ETL ETL / C-ETL ETL / C-ETL
Filter System Optional Optional Optional

XPOWER Limited Warranty
XPOWER Warranty covers the unit from defects in materials and craftsmanship. The Warranty
covers normal use for a term of one year from original date of purchase; including parts, labor
and one way shipping. XPOWER Blower / Fan Housing is covered for a term of five years from
the date of the original purchase.
Important !
Warranty does not cover signs of misuse including, but not limited to, a unit that has been
dropped, subjected to water damage, tampered with, improper voltage use and unauthorized
maintenance and repairs. The POWER CORD and FILTERS are not covered by the warranty.
Service
In order to receive service or replacement parts under warranty, you must:
A. Call for an RMA (Return Merchandise Authorization Number and Service Department
address).
B. Have proof of purchase.
The end user will be responsible to ship the unit (with RMA Number showing on the shipping
label) to the XPOWER Service Department. Upon inspection, we will advise you of the repairs
needed and the cost (if applicable). XPOWER will provide repair or replacement parts
depending on warranty.

13 1
2
5
7
9
12
14
10
8
6
43
11
Item No. Parts Name Item No. Parts Name
400-1 Left Housing 400-2 Grid Cover (Motor Side)
400-3 Switch Plate 400-4 Switch Knob
400-5 Switch 400-6 Motor
400-7 Right Housing 400-8 Power Cord
400-9 Fan 400-10 Grid Cover (Fan Side)
400-11 Air Outlet Grid Cover 400-12 Kick Stand
400-13 Filter I (Motor Side) 400-14 Filter II (Fan Side)
400 Series Parts List
400-15 Rubber Feet (Not Show) 400-16 Screws and Nuts (Not Shown)

Accessories
Filters(Optional)
A set of Filters is available for the XPOWER Blowers / Fans which will help prevent small debris and
dust from entering the unit. To clean the filters: Remove the filters from the unit and wash with warm
soapy water, rinse with clean water and let dry thoroughly before reinstalling.
Cage Drying Kit For the Professional Pet Grooming Industry
The Kit includes Blower / Fan Adapter, three 8 Foot Hoses and three Airflow Adjustment Doors.
1.
2.
Installation:
Filters snaps into the air inlets.
Note:
The filter I is Motor Side,
The filter II is for the Fan
Side.
Filter Removal::
Pull the filters out of the unit.
Note:
After cleaning make sure the
filters are dry before
reinstalling.
Hooks for easy hanging
Airflow adjustment door

Your Name / Company Name
Contact Name Title
Address City State Zip
Phone Fax E-mail
Blower / Fan
/ Fan
Information Model #
l #
Serial # :
# :
Date of Purchase / / Purchased From
Additional Comments/Suggestions
WARRANTY REGISTRATION
Please complete and mail or fax for your product warranty, for multiple units, please list serial numbers on a separate sheet of paper.
Address:
XPOWER MANUFACTURE, INC. 220 Clary Avenue San Gabriel, CA 91776, USA Tel: [phone], Fax: [phone]

TO:
XPOWER MANUFACTURE, INC.
220 Clary Avenue
San Gabriel, CA 91776, USA
Tel: [phone], Fax: [phone]
From: