XtendLan XL-ICA-306M3 User manual

HD IR Waterproof Fixed IP Camera User’s Manual
Version 3.5.0
HD IR Waterproof Fixed IP Camera
XL-ICA-306M3
User's guide

i
Welcome
Thank you for purchasing our IP camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this series product!
Please keep this user’s manual well for future reference!

ii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited
power source is rated 12V DC or 24V AC in the IEC60950-1.
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．Installation
Do not apply power to the camera before completing installation.
Please install the proper power cut-off device during the installation connection.
Always follow the instruction guide the manufacturer recommended.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
This series IP camera should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
Please keep it away from the electromagnetic radiation object and environment.
Please make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the camera.
6. Daily Maintenance
Please shut down the device and then unplug the power cable before you begin daily maintenance
work.
Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens
surface.
Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to
dilute the mild detergent first and then use it to clean the device. Finally use the dry cloth to clean the
device.

iii
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera.
7. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
Accessory Name Amount
IPC Unit 1
Quick Start Guide 1
CD 1

iv
Table of Contents
1General Introduction ..................................................................................................................1
1.1 Overview........................................................................................................................1
1.2 Features.........................................................................................................................1
1.3 Specifications................................................................................................................2
1.3.1 Performance...........................................................................................................2
1.3.2 Factory Default Setup...........................................................................................3
2Structure ....................................................................................................................................11
2.1 Multiple-function Combination Cable ......................................................................11
2.2 Framework and Dimension.......................................................................................12
2.3 Bidirectional talk .........................................................................................................13
2.3.1 Device-end to PC-end ........................................................................................13
2.3.2 PC-end to the device-end ..................................................................................13
2.4 Alarm Setup.................................................................................................................13
3Device Installation ....................................................................................................................15
4Quick Configuration Tool.........................................................................................................16
4.1 Overview......................................................................................................................16
4.2 Operation .....................................................................................................................16
5Web Operation..........................................................................................................................19
5.1 Network Connection...................................................................................................19
5.2 Login and Logout........................................................................................................19
6FAQ ............................................................................................................................................22
Appendix Toxic or Hazardous Materials or Elements ...............................................................23

1
1General Introduction
1.1 Overview
This series IP camera integrates the traditional camera and network video technology. It adopts audio
and video data collection, transmission together. It can connect to the network directly without any
auxiliary device.
This series IPC uses standard H.264 video compression technology and G.711a audio compression
technology, which maximally guarantee the audio and video quality.
It supports the IR night vision function. In the night environments, the device can use the IR light to
highlight the object which is suitable for the surveillance function in the low illumination environments.
The built-in protection enclosure and waterproof design conforms to the IP 66 level. It has the sound
waterproof function suitable for use in the outdoor environments.
It supports real-time monitor and listening at the same time. It supports analog video output and dual-
way bidirectional talk.
It can be used alone or used in a network area. When it is used lonely, you can connect it to the
network and then use a network client-end. Due to its multiple functions and various uses, this series
IPC is widely used in many environments such office, bank, road monitor and etc.
1.2 Features
User
Management
zDifferent user rights for each group, one user belongs to one group.
zThe user right shall not exceed the group right.
Storage
Function
zSupport central server backup function in accordance with your configuration
and setup in alarm or schedule setting
zSupport record via Web and the recorded file are storage in the client-end
PC.
zSupport built-in SD card.
zDo not support local SD card hot swap storage function. Support short-time
storage when encounter disconnection.
zSupport network storage function such as FTP.
Alarm
Function
zReal-time respond to external on-off alarm input, and video detect as user
pre-defined activation setup and generate corresponding message in screen
and audio prompt(allow user to pre-record audio file)
zReal-time video detect: motion detect, camera masking.
Network
Monitor
zIPC supports one-channel audio/video data transmit to network terminal and
then decode. Delay is within 270ms (network bandwidth support needed)
zMax supports 20 connections.
zAdopt the following audio and video transmission protocol: HTTP, TCP, UDP,
MULTICAST, RTP/RTCP, RTSP and etc.
zSupport web access.
Network
Management
zRealize IPC configuration and management via Ethernet.
zSupport device management via web or client-end.
Power zExternal power adapter DC12V/AC 24V. You can select according to your actual environments. Please note system can not support these two types of
power supplying at the same time.
Assistant
Function
zLog function
zSupport system resource information and running status real-time display.

2
zDay/Night mode auto switch.
zBuilt-in IR light. Support IR night vision.
zSupport picture parameter setup such as electronic shutter and gain setup.
zBacklight compensation: screen auto split to realize backlight compensation
to adjust the bright.
zSupport video watermark function to avoid vicious video modification.
zThe enclosure conforms to the IP 66 protection. Has the waterproof function.
1.3 Specifications
1.3.1 Performance
Please refer to the following sheet for IPC performance specification.
Model
Parameter
Main Processor TI Davinci high performance DSP
OS Embedded LINUX
System
Resources Support real-time network, local record, and remote operation at the same time.
User Interface Remote operation interface such as WEB, DSS, PSS
System
System Status SD card status, bit stream statistics, log, and software version.
Image Sensor 1/2.8-inch CMOS 1/3-inch CCD
Pixel 2048(H)*1536(V) 1280(H)*960(V)
Day/Night Mode Support day/night mode switch and IR-CUT at the same time.
Auto Aperture DC drive
Gain Control Fixed/Auto
White Balance Manual/Auto
Exposure Mode
Auto/Low noise/Low motion
blur/Defend flicker /Manual
PAL: It ranges from 1/3 to 1/10000
NTSC: It ranges from 1/4 to 1/10000
Manual/Auto
PAL: It ranges from 1/3 to
1/100000.
NTSC: It ranges from 1/4 to
1/100000
Video
Compression
Standard H264/H264B/MJPEG
PAL:
Main stream（2048*1536@15fps），
extra stream,（704*576@15fps）
Main stream（1920*1080@25fps），
extra stream（704*576@25fps）
PAL:
Main
stream(1280*[email protected]),
extra stream,
（704*[email protected])）
Main stream
（1280*720@25fps），
extra stream
（704*576@25fps）
Video Frame
Rate NTSC:
Main stream（2048*1536@15fps），
extra stream（704*480@15fps）
Main stream（1920*1080@30fps），
extra stream（704*480@30fps）
NTSC:
Main stream
（1280*[email protected]），
extra stream
（704*[email protected]）
Main stream
（1280*720@30fps），
extra stream
（704*480@30fps）
Video Parameter
Video Bit Rate H264/H264B/MJPEG
XL-ICA-306M3

3
Video Flip Support mirror and flip function.
Snapshot Max 1f/s snapshot. File extension name is JPEG.
Privacy Mask Supports max 4 privacy mask zones
Video Setup Support parameter setup such as bright, contrast.
Video
Information Channel title, time title, motion detect, camera masking.
Lens 8~16mm @F1.6 [email protected]
Lens Interface C/CS. Lens is the default accessories
Audio Input 1-channel，LINE IN
Audio Output 1-channel, 3.5mm JACK SPEAK OUT.
Bidirectional
Talk Input Reuse the first audio input channel
Audio Bit Rate 16kbps 16BIT
Audio
Audio
Compression
Standard G.711a/G.711u/PCM
Video
Motion Detect
396 (18*22) detection zones；sensitivity level ranges from 1 to 6 (The
6th level has the highest sensitivity)
Activation event, alarm device, audio/video storage, image snapshot,
log, email SMTP function and etc.
Alarm Input 2-channel input，1-channel output
Record Priority Manual>External alarm >Video detect>Schedule
Local Storage Support Micro SD card hot swap
Record and Backup
Storage
Management Support display local storage status
Wire Network 1-channel wire Ethernet port, 10/100 Base-T Ethernet
Network Protocol Standard HTTP, TCP/IP, ARP, IGMP, ICMP, RTSP, RTP,UDP, RTCP, SMTP, FTP, DHCP, DNS, DDNS, PPPOE, UPNP, NTP, Bonjour,
SNMP.
Network
Remote
Operation Monitor, system setup, file download, log information, maintenance , upgrade and etc
Video Output 1-channel analog video output，BNC port, 9-pin port connection
Reset 9-pin port connection
AUX
Interfac e
IR light 42 LED, IR distance 20 to 30 meters.
70 LED, IR distance 30 to 50 meters.
56 LED, IR distance 30 to 50
meters.
Power
Support AC24V/DC12V power.
Power
Consumption
For –IR2 device: 8W MAX (10W MAX
when ICR switch)
For –IR4 device:10W MAX (12W MAX
when ICR switch)
12W MAX (14W MAX when
ICR switch)
Working
Temperature -10℃~+60℃
Working
Humidify 10%~90%
Dimensions(mm) 288×118×101
Weight 2468G（Excluding box）
General Parameter
Installation Support various installation modes（Bracket is optional）
1.3.2 Factory Default Setup

4
Please refer to the following sheet for factory default setup information.
Default Setup
Setup Item
Brightness 50
Contrast 50
Hue 50
Saturation 50
Gain Mode Auto
Gain Limit 80
Exposure Mode Auto
Auto Iris On
Scene Mode Auto
Day/night Mode Auto
BLC Off
Mirror Off
Conditions
Flip Off
Bit stream
type General
Encode
mode H.264
Resolution 1080P（1920*1080）720P（1080*720）
Frame
Rate
（FPS）
PAL: 25
NTSC:30
Bit Rate
Type CBR
Recomme
nded Bit 3584-6144 Kb/S 1536-6144 Kb/S
Bit Rate 6144
I Frame 50
Watermark
Enable
Main
Stream
Watermark
character DigitalCCTV
Enable Enable
Bit stream
type General
Encode
mode H.264B
Resolution CIF(352*288/352*240)
Frame
Rate
（FPS）
PAL: 25
NTSC:30
Camera
Video Video bit stream
Sub
Stream
XL-ICA-306M3

5
Default Setup
Setup Item
Bit Rate
Type
CBR
Recomme
nded Bit 192-1024Kb/S
Bit Rate 1024
I Frame 50
Snapshot
Type General
Image
Size 1080P（1920*1080）720P（1280*720）
Quality 5
Snapshot
Interval 1s
Privacy
Mask Disable
Channel
Title Enable
Video Overlay
Time Title Enable
Snapshot
Path C:\PictureDownload
Path Record
Path C:\RecordDownload
Enable Enable
Main Stream Encode
Mode G.711A
Enable Disable
Audio
Sub Stream Encode
Mode G.711A
Host
Name IPC
Ethernet
Card Wire(Default)
Mode Static
Mac
Address Device MAC address when it is shipped out of the factory
IP Version IPV4
IP Address 192.168.1.108
Subnet
Mask 255.255.255.0
Default
Gateway 192.168.1.1
Preferred
DNS 8.8.8.8
Alternate
DNS 8.8.8.8
Network
TCP/IP
XL-ICA-306M3