XtendLan XL-ICA562M1CIR User manual

XL-ICA562M1CIR
Network IR dome camera
User’s Guide

Contents
Introduction
Safety Cautions
<Chapter 1. Package>
1.1 Camera Features·······························································································8
1.2 Package············································································································8
1.3 How To Install·······························································································································9
1.3.1 Camera installation······················································································································9
1.3.2 Camera angle adjustment ······································································································10
1.3.3 Lens adjustment ·····················································································································10
1.3.4 Dimension··································································································································11
1.4 Specification··································································································11
1.4.1 Camera Specification························································································11
1.4.2 Camera Function·····························································································12
1.4.3 Network Specification························································································12
1.4.4 Electric Specification························································································13
1.4.5 Alarm Input/Output···························································································14
<Chapter 2. Installation and Video Check>
2.1 Installation·······································································································16
2.2 Video Check····································································································17
2.2.1 Change the setting value of PC network environment·················································17
2.2.2 Connect the camera with web browser···································································18
2.2.3 See the video··································································································19
2.2.4 Input ID/Password··························································································19
2.2.5 Active-X auto installation·················································································19
2.2.6 Complete the installation··················································································21
2.2.7 NetViewer description······················································································22
<Chapter 3. Network Setting>
3.1 Check Network and Installation Type ·······························································24
3.2 Installation without IP sharing device(router)·····················································24
3.2.1 Static IP Setup·································································································24

3.2.2 Dynamic IP Setup·····························································································29
3.3 Installation with IP sharing device(router)··························································32
3.3.1 General Installation···························································································32
3.3.2 Port Setting change and Installation······································································33
3.4 Cautions for Network Setting············································································35
<Chapter 4. System Setting>
4.1 General Setting································································································37
4.1.1 Title Setting··································································································38
4.1.2 Time Setting·································································································38
4.1.3 Active-X download·························································································39
4.1.4 Select Language····························································································40
4.2 Access Setting·································································································40
4.2.1 Administrator's ID and Password Change······························································40
4.2.2 User Registration···························································································41
4.2.3 User List······································································································41
4.3 Network Setting································································································42
4.4 Video Setting···································································································42
4.4.1 Video format·································································································42
4.4.2 Resolution····································································································42
4.4.3 Video Mirror Function······················································································43
4.5 MPEG Setting··································································································44
4.5.1 MPEG4 stream service·····················································································44
4.5.2 Stream Setting·······························································································44
4.6 MJPEG Setting·································································································46
4.6.1 MJPEG Stream Service····················································································46
4.6.2 Stream Setting·······························································································46
4.7 Motion Setting··································································································47
4.7.1 MD function··································································································48
4.7.2 Motion type setting·················································································································48
4.7.3 MD control···································································································48
4.7.4 MD Area······································································································48
4.8 OSD Setting·····································································································49
4.8.1 OSD Function································································································49
4.8.2 OSD Type····································································································49
4.8.3 OSD Font·····································································································49
4.8.4 OSD Color····································································································50
4.9 Privacy Zone Setting························································································50

4.9.1 Privacy Zone Function·····················································································50
4.9.2 Privacy Zone Color·························································································50
4.9.3 Privacy Area Setting························································································50
4.10 Camera Control 1···························································································51
4.10.1 Day & Night filter switching······································································································51
4.10.2 Day & Night Filter Change···············································································52
4.10.3 White Balance······························································································52
4.10.4 Back Light Compensation···············································································52
4.11 Camera Control 2···························································································53
4.11.1 Effect 1······································································································53
4.11.2 Effect 2······································································································53
4.12 Alarm In/Out Setting·······················································································54
4.12.1 Alarm In···································································································54
4.12.2 Alarm Out·································································································55
4.13 Alarm In/Out Setting·······················································································56
4.13.1 Recording Function·······················································································56
4.13.2 Recording Interlocking···················································································56
4.13.3 Server·······································································································56
4.14 Homepage Update·························································································57
4.15 Firmware Upgrade··························································································58
<Chapter 5. IP Finder & DDNS Server Setting>
5.1 Use of IP finder·····························································································62
5.1.1 Run IP finder program···················································································62
5.1.2 Find IP address··························································································63
5.1.3 Change IP address······················································································64
5.2 Use of DDNS server······················································································65
5.2.1 User registration·························································································65
5.2.2 Camera registration·····················································································68
5.2.3 List of camera····························································································69
5.2.4 Change of User's information·········································································70
5.2.5 Search camera···························································································71
<Chapter 6. Basic Network>
6.1 Public IP······································································································································73
6.2 Private IP····································································································································74

6.3 Ping test ·································································································································75
<Chapter 7. Appendix>
7.1 Basic setting table···························································································78
7.2 Troubleshooting of cable connection ·······································································79
7.2.1 Power cable connection check ········································································79
7.2.2 Network cable(LAN Cable) connection check ··························································79
7.3 Troubleshooting of Network connection·······································································80
7.3.1 Cannot connect with Network·······························································80
7.3.2 Check port setting··········································································80
<Chapter 8. Troubleshooting>···········································81
<Chapter 9. Warranty Card>···············································82

Introduction
This is a megapixel network camera which uses a 1/3-inch megapixel progressive scan SONY Exview
HAD CCD
Built-in MPEG4, MPEG CODEC and streaming server, the advantage of this camera allow you to
monitor real time image from a remote location via internet. This camera supports both static IP and
dynamic IP, and can change communication port, resulting in one IP address supporting multiple
servers. It also supports CMS(Central Monitoring System), various services and features weatherproof
for outdoor use without extra device.
<Caution>
Software, server and service may be charged according to change of policy or may be
stopped without prior notification. Appearance, function and specification may be changed
without prior notification. Our company assumes no responsibility for visible or invisible loss
resulted from changes in policy or products.
Safety Cautions
*This camera may be damaged by electrical and physical shock.
Use regulated 12V DC, 1A power supply. Do not throw or drop it onto floor.
*In case the unit fails, DO NOT try to disassemble the product.
Contact or consult the distributor or an authorized technician for after-sales service.
Warranty void for the product disassembled without an authorization from the distributor or
an authorized technician.
* All responsibility by using this unit is on the user.
*In case it is installed at high location, be sure to mount securely to prevent the unit from
falling below
*This product has 2 models according to IR LED.
①Type 1(w/o IR)
②Type 2(with IR)
-This manual is based on Type 2.

Chapter 1.
Package
1.1 Camera Features·····························································································8
1.2 Package··········································································································8
1.3 How To Install··································································································9
1.4 Specification··································································································11

8
Chapter 1. Package
1.1 Camera Features
1) Firmware upgrading and function controlling are available by network.
2) Built-in 1.3 Mega pixel 1/3" progressive Sony EXview HAD CCD.
3) This camera has a mechanical exchange of two filters with Sense up function to
receive the maximum available light at night.
4)Equipped with a number of convenient new functions such as OSD, Motion detection, Privacy
ZONE and E-zoom
5) This camera adopted PoE that supplies power in addition to data sending and receiving using LAN
cable without separate power connection and it provides convenience for users at installation. When you
connect the camera with PoE and DC adaptor, Only PoE is used.
1.2 Package
Package of Products is composed of camera, screw, user manual, software CD, cross cable(see
below). Please check before starting installation. If there are any missing, please contact the shop
where you purchased. The cross cable should be used only for pre-view of video before set-up and
change of network information.
[Caution] Please see the package as follows. This manual is based on Microsoft Windows XP. So, there
would be the Difference according to operating system

9
1.3 HOW TO INSTALL
1.3.1 Camera installation
Fix the camera set with the supplied screws on ceiling or wall mount. If you don't use supplied screws, the
camera may fall off.
Put a sticker on the ceiling and make holes according to the spots marked on a sticker.
<Ceiling mount>
<Wall mount>

10
1.3.2 Camera angle adjustment
(1) Pan adjustment : Grasp the disk of camera and then adjust direction to the right or left(-160˚~ 190˚)
(2) Tilt adjustment : Grasp the LED cover of camera and then adjust direction to the up or down(6˚~ 90˚)
(3) Roll adjustment : Grasp the camera holder and then rotate (-178˚~ 178˚)
<Caution> If you try to adjust the camera out of limited angle, it might cause troubles and damage to
camera.
1.3.3 Lens adjustment
After opening the LED cover,
① By turning the "Tele-Wide" knob, you can access a range of focal
lengths within specified limits.
② Since then, by turning the "Near-Far" knob, you can set the
focus toward the wanted object.
.

11
1.3.4 Dimension
1.4 Specification
1.4.1 Camera Specification
Item Specification
Model No. Type 1 Type 2
Type Megapixel network vandal-proof dome camera
Image Sensor 1/3” SONY Progressive Scan EXview HAD CCD (1.3 Mega Pixels)
Effective pixel 1296 (H) × 966 (V)
Cell size 3.75㎛(H) x 3.75㎛(V)
Resolution 1280 x 960 / 640 x 480 / 320 x 240
TV Type NTSC / PAL
Scanning System Progressive Scan
Min.illumination 0.01 Lux (Sense up Auto x 4) 0.01 Lux (Sense up Auto x 4):LED OFF
0 Lux(25 Range):LED ON
Alarm input/output Input:1,output:1
IR LED - 24PCS
Lens Vari-focal auto iris megapixel lens

12
1.4.2 Camera Function
Item Configuration
DAY&NIGHT Auto,Color, B/W
BLC Off, BLC1, BLC2, BLC3
Sense up Off, Auto X2 ~ X255
Brightness Adjustable
Contrast Adjustable
Sharpness Adjustable
AWB Auto, Indoor, Outdoor, Fluorescent, Manual
Saturation Adjustable
Hue Adjustable
Negative Off, On
Pattern Generator Off, On
Focus index Display Off, On
Blemish Dynamic Compensation
EZOOM X1 ~ X12 Selectable(Available with CMS only)
1.4.3 Network Specification
Classification Item Specification
OS Embedded Linux
Network Interface RJ45 10/100BaseT, Ethernet
Setting By web browser
Network support Leased Line, Cable Modem, Support Dynamic IP
and Static IP. ADSL usable under Router
Supported Protocol HTTP,FTP,TCP/IP, DHCP, ARP, DNS, ICMP
Security USER AUTHENTICATION
PC OS(Viewer) WINDOWS 2000, WINDOWS XP, WINDOWS VISTA
Summary
Web browser Server setting function, Web Viewer
Download Page, User Homepage Upload
Compression MPEG-4, MJPEG
Resolution CIF(320x240)/VGA(640x480)/QVGA(1280x960)
Image
Compression Rate 200:1(Typical)

13
Frame Rate NTSC ( MAX :CIF/VGA 30 fps, QVGA 15 fps )
PAL ( MAX:CIF/VGA 25 fps, QVGA 12.5 fps)
Bit Rate 64kbps ~ 8000kbps
Simultaneous Access Max. 10 users(under 5 users recommended)
Video Recording Recording in client PC with CMS or
FTP Server upon Alarm Event
Motion Detection Support
Privacy Zone Support
OSD Support
Alarm Input/Output Support
Dynamic IP Support
IP Router Support
Function
DDNS Support
1.4.4 Electric Specification
Classification Specification
Power Supply Regulated 12V DC(Buiot-in Reverse polarity protection)
PoE(Power over Ethernet)
Current Consumption MAX. 1A(DC 12V)IR LED ON
Operation Temp. 5℃ ~ 50℃
Preservation Temp. -20℃ ~ 60℃
Dimension Ø150X 95.6(H)mm
Weight Approx.867g
※The specification is subject to change without any prior notice to improve the quality.

14
1.4.5 Alarm Input/Output

Chapter 2.
Installation and Video Check
2.1 Installation·······················································································16
2.2 Video Check····················································································17

16
Chapter 2. Installation and Video Check
2.1 Installation
On the assumption that User PC and the camera are used under static IP,
and the camera is to be directly connected with User PC or Local Network,
The installation procedure is to be;
(1) Connect the camera and PC with LAN Cable(Cross cable).
(Please use the direct cable if you connect to local network)
(2) Power on camera.
* Using regulated 12V DC 500㎃(No IR LED model) or 1A (Built-in IR LED model)
* Using PoE(Power Over Ethernet) : This camera adopted PoE that supplies power in addition
to data sending and receiving using LAN cable without separate power connection and it
provides convenience for users at installation. When you connect the camera with PoE and DC
adaptor, Only PoE is used.
(3) Wait about 2 minute after on camera, the system will be booted.

17
2.2 Video Check
Basic network setting value of the unit is to be;
To connect the unit in user's PC, change the setting value of PC network environment.
Set IP Address, Subnet Mask and Gate-way of user's PC with 192.168.1.50 /
255.255.255.0 / 192.168.1.1 as shown on [Pic. 2-1].
[Caution] Before changing the setting value, please memorize the previous setting value
on your PC.
2.2.1 Change the setting value of PC network environment
[Pic. 2-1] Network Setting for User PC

18
2.2.2 Connect the camera with web browser
[Pic. 2-2] Web Browser Address Input
(1) Run web browser as shown [Pic. 2-2].
(2) Input 192.168.1.8 (default value) in URL and press "ENTER" button.
(3) And then, [Pic. 2-3] is to be shown.
[Pic. 2-3] Main Homepage
(4) In case [Pic. 2-3] does not appear, press "factory reset" button for 5sec to reset
Hardware.
(5) Shown [Pic. 2-3], installation is complete

19
2.2.3 See the video
Click button on the main page [Pic. 2-3].
2.2.4 Input ID/Password
Input ID and Password and click on to see the video feed
(ID : root, Password : root)
[Pic. 2-4] User Login
User's Authority to see video feed is as follow
[Table] User ID, Password, Authority
[Caution] Please change default value of ID/Password into new ones after the installation
2.2.5 Active-X auto installation
Input ID and Password and click on to see the video feed.
User's Authority to see video feed is as follow
Click "install" on the security certificate to load the Active-X control. If you choose
"Don't install", the web viewer would not work.