Yaesu FTM-10R User manual

2 m/70 cm Band FM Dual Band Transceiver
FTM-10R/E
*
2 m/70 cm Band FM Dual Band Transceiver
(144MHz 50W / 430 MHz 40W)
FTM-10R/E
*
Great New Features to
Support Outdoor Motor Sports Activities
Actual Size
* E for European Version

•
Great new appearance! The keys and indicators
are illuminated with very bright LEDs. The bright
ocean blue negative type LCD display is easy on
your eyes.
•Super compact detachable front panel is ready
to go with your motor vehicle!
•The high power RF
output of the FTM-10R/E*
is produced by the heavy
duty, high efficiency, RF
POWER MOS FET
amplifier. Powerful and
reliable 2 m / 70 cm Band
operation is guaranteed.
•
The FTM-10R/E* has a completely independent
AM/FM broadcast radio receiver, in addition to
the amateur band receiver. You will enjoy
broadcast band receiver coverage, and high
quality operation on the 2 m / 70 cm bands at
the same time.
•Band Group Memory System
The versatile memory system uses up to 500
memory channels. Each memory channel can be
labeled with an 8-digit alphanumeric tag. The
memory channels may
be recalled by a specific
operating band, if desired.
•The FTM-10R/E* has a large 2 inch/50 mm ,
1.5W speaker in the die-cast chassis and is
equipped with a high power 8-watt audio
amplifier, and a PA function for outdoor operation
with the optional MLS-200-M10 speaker(s). A
high quality 1.1 inch /28
mm speaker is built into
the detachable front
panel; you can operate it
like an HT!
•The simple hanger type
bracket may be attached
to the top or bottom. The
front panel may be tilted
up or down 20 degrees
with an adaptor bracket. The basic installation kit
is included. (With the adapter bracket, 10 ft / 3 m
separation control cable, magnetic mount, and
the one-touch release hanger bracket.)
•The optional, moisture and dust protected MLS-
200-M10 external loudspeaker is available for
use in a noisy outdoor environment.
•The microphone and PTT button are built into
the front panel. Detach the front panel with one-
touch release when transmitting! The detachable
front panel may be separated from the main
chassis, and attached to a flat metal surface with
the magnetic mounting bracket.
NB:
1) Use of a communication device with a display while driving
may be prohibited in some states and some Countries.
2)
Optional microphones and the external microphone jack
MEK-M10 are also available.
HIGH QUALITY, WELL BUILT, RUGGED
DUAL BAND FM TRANSCEIVER
COMPLETE NEW STYLING
EASY-TO-OPERATE PACKAGE!
•Hanger Bracket
20°
20°
1.1 inch/28 mm
speaker
Newly Designed Mobile Transceiver with Waterproof/Dustproof
Front Operation Panel to Support All-Weather Outdoor Activity.
(* Meets the IP57 standard. Waterproof at 3 ft (1 m) for
30 minutes and protection against dust)
The detachable Control Panel is shown here mounted on a motorcycle
handlebar using the optional MMB-M11 multi-angle bracket.
The die-cast chassis section is not a waterproof structure (FTM10R/E*).

•Hands-free operation is possible, using the
wireless Bluetooth¤ option, and a headset.
Note: The FTM-10R/E* chassis section is not a waterproof enclosure.
Note: The Wireless cloning function can only be performed by
and between the FTM-10R/E transceivers. Other transceivers
and radios are not supported.
HEAVY DUTY YET EASY TO OPERATE
OTHER USEFUL FEATURES
FOR YOUR OUTDOOR
MOTOR SPORTS ACTIVITIES
COMMUNICATE WITH YOUR FRIENDS ON THE ROAD!
LOADED WITH MANY HANDY FUNCTIONS
FOR USE DURING ALL-WEATHER OUTDOOR
MOTOR SPORTS ACTIVITIES
•A minimum number of key buttons on the front
control panel, for safer operation during motor
sports activities. The large multi-functional dial
and durable keys are easy to operate even when
wearing gloves.
•
Equipped with a high power 8-watt audio amplifier.
Use the PA function with the optional, commercial
grade MLS-200-M10 speaker.
•
With the intercom feature, you can communicate
with a fellow passenger. Hands-free intercom
operation is available with the optional Bluetooth®
function.
•
AF Dual Monitor Function: Listen to your favorite
AM or FM stereo broadcast station, and monitor
an amateur band at the same time! External audio
input is also available to connect your iPod®!
•The Smart Key feature:
The "F" key on the control panel accesses the
most frequently used functions.
•AF Pre-Set Function
The audio volume bar appears on the LCD
screen and shows an orange warning if the
volume is below a Pre-
set level, preventing you
from missing lower volume
audio stations.
•Tone control •Band Up/Down key for easy
operation. •Simple key locking. •Automatic Volume
Control can adjust the speaker volume relative to
a nearby noisy environment. •Dimmer — Display
brightness control. •Three transmit power levels
are available: 50W (70 cm : 40W) / 20W /5W
•The VOX function includes automatic audio
delay on transmit to ensure transmission of the
start of your message. •The Time-Out Timer (TOT)
function can end a continuous transmission after
a preset time. •The Internet Connection Feature
can be used to access the Vertex Standard
WiRES-II™system. •Various scanning features.
•DC input voltage display •The Smart Search
feature that will scan and load frequencies
automatically where activity is found. •The
ARTS™(Automatic Range Transponder System)
feature which provides audio and/or visual
confirmation that another ARTS™equipped
station is within communication range.
•The Club Channel Monitor function permits
your group to always monitor the designated
user-defined frequency.
•
The message function can transmit alphanumeric
messages (up to 20 messages/16 characters
maximum) with a sender’s ID. In an emergency
the message can be communicated even in a
noisy outdoor environments.
•Wireless cloning allows transfer of memory
information without any cable.
•
Includes an event timer stopwatch with an interval
function to support many outdoor motor sports activities.
•
Enjoy your FTM-10/E* outdoor with your motorcycle,
SUV or RV anywhere! The commercial grade
front panel meets the IP57 standard. (Waterproof
at 3 feet (1 m) for 30 minutes, and protection
against dust.) All connectors are waterproof.
•The main body of the FTM-10R/E* is a solid die-cast aluminum sandwich structure. The high quality
die-cast aluminum chassis doubles as the heat sink providing more than enough air-cooled ventilation
for the power modules. The sandwich structure also provides far better resistance to vibration and
shock than many conventional transceivers and radios.
•The design shields against ignition noise and alternator whine for mobile operation!
Hands-free operation
with VOX function
Options
BH-1
Bluetooth®headset
(Waterproof equivalent
to IP55 standard)
CAB-1
Headset charger
sleeve for the BH-1
Bluetooth®headset
BU-1
Bluetooth®
adapter unit
(The optional BU-1 Bluetooth®unit can be installed either in the
control panel unit or in the main body)
"Up" / "Down" Select a function
"F" Execute/Accept
DIMMER
INTERCOM
MONI
PA
SCAN
SQL LEVEL
SSCH
TX POWER
VOL.ITCOM
DIMMER Adjust brightness of the display
Turn Intercom function On/Off
Disables the noise squelch, allowing you to hear
weak signals.
Enables/Disables the PA function. Press PTT to activate.
Scan frequencies or memory channels.
Adjust the squelch threshold level.
Activate Smart Search function
Select the transmitter power level
Adjust the intercom audio level.
Receive an AM, or
FM stereo, broadcast
station and monitor
an amateur band at
the same time
*E for European Version
* Photo is Using Optional MEK-M10
NB: AF Dual Monitor Function does not permit monitoring two
different amateur bands at the same time.

General
Frequency Range: RX: 0.5 - 1.8 MHz (AM BC)
76 - 108 MHz (FM BC)
108-137 MHz (Air Band)
137-174 MHz (144 MHz HAM)
174-222 MHz (GR1 VHF TV)
300-420 MHz (GR2 )
420-470 MHz (430 MHz HAM)
470-800 MHz (GR1 UHF TV)
800-999 MHz (GR2 USA Cellular Blocked)
TX: 2 m /70 cm Amateur Bands
Channel Steps: 5/6.25/8.33/(9)/10/12.5/15/20/25/50/100/200 kHz (9): AM Only
Emission Type: F3E, F2D
Antenna Impedance : 50 Ohms
Frequency Stability : ±5 ppm @ 14°F ~ +140°F (–10°C ~ +60°C)
Operating Temperature Range : –4°F ~ +140°F (–20°C ~ +60°C)
Supply Voltage: Nominal: 13.8 V DC, Negative Ground
Operating: 11.7 ~ 15.8 V, Negative Ground
Current Consumption : RX: 0.5 A (Receive)
(Approx.)
8.3 A / 6A / 2A(TX, 2 m 50W / 20 W / 5 W)
8.5 A/ 6 A/ 2A (TX, 70 cm 40W / 20 W / 5 W)
Case Size (W x H x D) : 4.4" x 1.5" x 7" (112 x 37.6 x 178 mm)
(w/o knobs & connectors)
Weight (Approx.): 2.9 lb. (1.3 kg)
Transmitter
RF Power Output: 50/20/5 W (2 m)
40/20/5 W (70 cm)
Modulation Type: Variable Reactance
Maximum Deviation : ±5 kHz
Spurious Radiation : At least –60 dB below
Microphone Impedance : 2 kΩ
Receiver
Circuit Type: FM / AM: Double-Conversion Super heterodyne
WFM: Triple-Conversion Super heterodyne
AM / FM Radio: Single-Conversion Super heterodyne
Intermediate Frequencies :FM / AM: 1st: 47.25 MHz, 2nd: 450 kHz
WFM: 1st: 45.8 MHz, 2nd: 10.7MHz, 3rd: 1MHz
FM Radio: 130 kHz, AM Radio: 50 kHz
Sensitivity: 5 µV TYP for 10 dB SN (0.5-1.7 MHz,AM)
2 µV TYP for 12 dB SINAD (76-108 MHz, WFM)
0.8 µV TYP for 10 dB SN (108-137 MHz,AM)
0.2 µV for 12 dB SINAD (137-140 MHz, FM)
0.2 µV for 12 dB SINAD (140-150 MHz, FM)
0.25 µV for 12 dB SINAD (150-174 MHz, FM)
1 µ V TYP for 12 dB SINAD (174-222 MHz, WFM)
0.8 µV TYP for 10 dB SN (300-336 MHz,AM)
0.25 µ V TYP for 12 dB SINAD (336-420 MHz, FM)
0.2
µ V for 12 dB SINAD (420-470 MHz, FM)
5
µ V TYP for 12 dB SINAD (470-540 MHz, WFM)
5
µ V TYP for 12 dB SINAD (540-800 MHz, WFM)
0.4 µ V TYP for 12 dB SINAD (800-899.99 MHz, FM)
0.8 µ V TYP for 12 dB SINAD (900 - 999.99 MHz, FM)
*USA Version Cellular Blocked
Squelch Sensitivity : Better than 0.16 µV (Amateur Band)
Selectivity : NFM, AM 12 kHz / 30 kHz (–6 dB / –60 dB)
AF Output:
8 W @ 4 Ohm for 10 % THD (@ 13.8 V) BTL EXP SP
4 W @ 4 Ohm for 10 % THD (@ 13.8 V) Normal EXP SP/CH
AF Output Impedance : 4-16 Ω
Specifications
Options
BH-1
Waterproof (equivalent
to the IP55 Standard)
Bluetooth®headset
BH-1
Waterproof (equivalent
to the IP55 Standard)
Bluetooth®headset
BH-1
Waterproof (equivalent
to the IP55 Standard)
Bluetooth®headset x 2
MMB-M11
Multi-angle Mounting Bracket
CT-M10
20ft/6 m Front Panel Separation Cable
MH-68A6J
Waterproof DTMF
Hand Microphone
MH-68B6J
Waterproof Hand
Microphone
MH-68A6J
Waterproof DTMF
Hand Microphone
MH-68B6J
Waterproof Hand
Microphone
BU-1
Bluetooth®
Adapter unit
BU-1
Bluetooth®
Adapter unit
BU-1 Bluetooth®adapter unit
for the front control panel and
the main body
CAB-1
Headset charger sleeve for
BH-1 Bluetooth®headset
CAB-1
Headset charger sleeve for
BH-1 Bluetooth®headset
MEK-M10
Microphone Jack
for the front control
panel
MMB-M10
Multi-angle Stand Bracket
MLS-200-M10
Waterproof (Equivalent to
the IP55 Standard)
external speaker (8 W)
MLS-200-M10 X 2
Waterproof (Equivalent to the IP55
Standard) external speaker (4 W x2)
Operation Customizing Options Operation Customizing Options
Audio Amplifier/PA Function
Hands Free Operation
Intercom Function
External Microphone
Mount the FTM-10R/E Front Control Panel
on a Motorcycle Handlebar
Mount the FTM-10R/E Front Control Panel
inside your Motor Vehicle
Separation Kit (more than 10 ft)
Supplied Accessories
MIC
EXT SP Jack
MLS-200-M10
MEK-M10 Microphone Jack for
the front control panel
MIC Jack
CAB-1 Headset charger sleeve
CAB-1
Headset charger sleeve
BH-1
Bluetooth®headset
BH-1
Bluetooth®
headset
BH-1
Bluetooth®headset
BH-1
Bluetooth®headset
BH-1
BU-1
BU-1 Bluetooth®
Adapter unit
BU-1 Bluetooth®
Adapter unit
BU-1 Bluetooth®
Adapter unit
BU-1 Bluetooth®
Adapter unit
Stereo output cable
(Supplied)
Using Bluetooth¤ headset
iPod®etc.
iPod®etc.
FEP-4
FEP-4
Ear Phone for BH-1
Hanger bracket
• With Hanger brackett • Direct mounting
External Audio Input (CD player, iPod®, etc.)
External Stereo Audio Output
L
R
MLS-200-M10 x 2
(NB : 10ft/3 m Front Panel Separation Cable is
included as a supplied accessory.)
PTT
PTT
PTT
PTT
PTT
PTT
LINE IN
LINE IN
LINE IN
LINE IN
Mobile Mounting
Bracket
Angle Adapter
Spare Fuse DC Power Cord W/Fuse
Separation Cable (10 ft/3 m)
Separation Cable (10 ft/3 m)
Magnet Speaker Cable
Front Panel Bracket
Hex Wrench
(4 mm,3 mm)
R
L
2007.0510NA(U/E) Printed in Japan
B9200563
VERTEX STANDARD CO., LTD.
For the latest Yaesu news,visit us on the Internet:
4-8-8 Nakameguro, Meguro-ku, Tokyo 153-8644, Japan VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525, 1118 ZN Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
http://www.vxstd.com
http://www.vertexstandard.com
Email: [email protected]
http://www.yaesu.co.uk
Email: [email protected]
Phone [phone]
http://www.vxstd.com.hk
VERTEX STANDARD AUSTRALIA PTY. LTD.
Normanby Business Park, Unit 14/45 Normanby Road
Notting Hill 3168, Victoria, Australia
Phone [phone]
Phone [phone]
Phone [phone]
Phone [phone]
About this brochure: we have made this brochure as comprehensive and factual as possible. We reserve the right, however, to make changes at any time to equipment, optional accessories, specifications,
model numbers, and availability. Precise frequency range may be different in some countries. Some accessories shown herein may not be available in some countries. Some information may have been
updated since the time of printing; please check with your Authorized Yaesu Dealer for complete details.
* Monoral audio output
or
or
or
or
or
MEK-M10
Microphone Jack
(for Front Panel)
•DC Power Supply FP-1030A (25 A) / FP-1023A (25 A / USA Version)
MEK-M10
PTT
PTT
1
Using Bluetooth¤ headset
Using after-market headset
Using after-market headset
(After-market headset)
After-market headset
After-market headset After-market
headset
2
2
1
1
2
CT-M11
External Headset
Connection Cable
CT-M11
External Headset
Connection Cable(After-market
headset)
CT-M11
CT-M11
CT-M11
Bracket(L)
Bracket(S)