Yale YDG313 User manual

YDG313
The functions and design of this product can be changed without
prior notice for quality improvement.

2
x
x
Dry
Cloth
Do not attempt to
disassemble the unit
by yourself. That can
cause an electronic shock
and product damage.
Do not install the product in
the outdoor environment.
Be careful not to let any
unauthorized users discover
your PIN Code.
Please keep your PIN Code safe.
Make sure the door is securely
locked whenever you leave
your house, especially in the
manual lock mode.
Do not force with a tool.
Keep foreign materials away
from the Card Key Sensor to
maintain it cleanly and do not
use it with wet ngers.
If the sheet is already papered,
the product's adhesive strength
lessens Please remove the sheet
completely before installing.
When a double-opening door
l ock is installed, one of the doors
must be closed.
Do not spray water directly to
the product or wipe it with
chemical substances such as
benzene, thinner, or alcohol
when cleanig the product.
Safety Feature

3
Product Features
Advance Mode
Advance Mode can be used for professional and high secure
management.
Magic Mirror
A magic Mirror function is applied, which the keypad number appears on the
Mirror as soon as a user touches the product. The user can chech the rear
through the Magic Mirror, so that security can be enhanced.
Safe Thumb-turn
Only if a user pushes the two safe buttons simultaneously axed to the thumb-turn
knob, the user can turn the thumb-turn knob. Its security is improved compared to
normal knob.
Modern & Thin design
It is the Solid and thin design using digital keypad on a solid base.
High Temperature Alarm
When there’s re, it detects the temperature of the inside.
It not only goes o an alarm but also releases the lock status automatically.
Remote Control (Option)
You can use the Remote Control by installing the applicable remote control
module.
This option may not available depending on your country or local dealer.

4
The durability depends on the battery life and the frequency of use.
The color of the product may change if it is under the direct light for a long time, and it is not a defect.
Optional Accessory (purchase separately)
Specifications
Remote Control
Remote Control Module
Strike for a double side door
Parts
Front Body 14(D) x 72.8(W) x 186(H)
48.8(D) x 77.5(W) x 190.5(H)
4EA 1.5 AA alkaline batteries
(Operating voltage: 4.5 ~ 6V)
Operating temperature :
Last up to 1 year
(10 times used a day)
Back Body
Battery
Specifications Remarks
Basic Contents
Magnet for
a single door
Extension
type deadbolt
10mm door
thickness gasket
Front Body Back Body
Screws
Card Keys (4EA)
User Guide
Installation Template
Components Overview

5
Specifications
Front Body Back Body
Keypad
Lowbatt.
Card key
Reader
Emergency Power
Supply Terminal
Battery
Cover
Slot for Remote
Control module
(optional extra)
Manual
Thumb Turn
Safe Knob
Open/Close
Button
Registration
button
Dead Bolt

6
Registering User PIN Code
Registering Card Keys
Open Door with User PIN Code
Open Door with Card key
To Use Card Key
Contact Card Key
To Use User PIN Code
Caution
How to Use
Press
(Registration) button
Press
(Registration) button
Enter User PIN Code
(4 to 12 digits)
Press
(Registration) button
Press
(Registration) button
Contact all the keys
you wish to register
on one by one
User PIN Code should be set Within 4 to 12 digits. [ ] and [ ] are not allowed.
Touch with palm
Enter User PIN Code
(4 to 12 digits)
Touch with palm or
Press button to end
Keep the door open while you register Card Key to prevent yourself from accidentally getting locked out.
The previously registered Card Key will automatically be deleted when the new Card Key is registered.
Please use the only provided RF Cards in the package for security.

7
To Close Door from Outside 
To Close Door from Inside
Lock Door
Step Icon Description
Step Icon Description
Auto Lock status
Touch the keypad in the front body gently with your
palm to lock a door.
Manual Lock status
- Please check the deadbolt as it turns to standby mode and stop when closing a door.
- If the door is twisted, the auto-lock feature will not function properly. Please check before use.
The built-in Auto Lock sensor automatically locks
a door within 5 seconds after closing the door.
Turn the manual thumb turn to
unlock pressing buttons together.
Press open / Close button.
The built-in Auto Lock sensor automatically locks
a door within 5 seconds after closing the door.
(If an auto-lock magnetic is not installed, you cannot
enable the auto-lock feature.)
Manual Lock status
(The default setting)
Auto Lock status
How to Use

8
Set
Release
Outside Forced Lock Setting - PIN Code
Forced Lock
Inside Forced Lock Setting
Outside Forced Lock Setting - Card Key
- If compulsory external lock is setup, the door open/close button will not function. The alarm will go o if one tries to open the door through
the manual opening/closing unit.
- To open the door with the manual opening/closing unit under compulsory external lock setting, one must completely turn the know within
one second. Or else, the door will lock itself again.
Set
Press the Registration button or,
Turn the manual thumb turn to pressing
buttons together.
Release
Press the Open / Close button
for 5 seconds.
Touch with palm
Enter User PIN Code
Enter button
for 3 sconds
Contact Card Key for 3 seconds until you hear 3 beeps.
How to Use

9
To Set Auto Locking Mode
To Set Manual Locking Mode * The default setting
Auto / Manual Locking Mode
Auto lock setting locks a door in 5 second after the door was closed.
Even after a door was locked by the Auto Lock function, please check again
if the door was completely locked.
Press
(Registration) button
Press
(Registration) button
Enter button Enter number and
on the keypad
Be careful not to leave the door open at manual lock mode.
Press
(Registration) button
Press
(Registration) button
Enter button Enter number and
on the keypad
MUTE
* The default setting : High
Volume Setting Feature
It enables you adjust the sound volume.
Press
(Registration) button
Press
(Registration) button
Enter button
LOW
HIGH
,
,
,
How to Use

10
Open / Close Button Setting Feature
It enable you set the Open / Close button .
* The on/o of the function changes every time one sets the setting.
* When the system is set to o, the open/close button does not function.
Press
(Registration) button
Press
(Registration) button
Enter button Enter number and
on the keypad
How to Use

11
ᆿᗹࣕ㜳
Safety Feature
Alarm Feature
 The alarm sound continues for 30 minutes or until it is reset.
Break-in / Damage Alarm
High Temperature Alarm
Break-in : When someone tries to Break-in by opening a door when it is locked, the alarm will Sound.
When there’s re, it detects the temperature of the inside. It not only Sounds an alarm
but also releses the lock status automatically.
Even when the inside Forced Lock mode is set, the High Temperature Alarm releases
the lock status automatically.
Damage : When the front body was damaged due to forced separation or drilling, the alarm will Sound.

12
ᆿᗹࣕ㜳
To Release 3-minute Lock
3-minute Lock Feature
Open Door with Fake PIN Code
If incorrect security codes or unregistered Card Keys are attempted
5 times in a row, it will lock out for about 3 minutes with the blinking LED.
This is an security measure to prevent your PIN Code being accidentally
exposed. It is only available for your family code PIN number and not
use with the visitor code.
Press the Open / Close button.
Method 1
Method 2
Method 3
Press the Back Body button.
Open with a thumb turn.
* 3-minute Lock mode won’t aect any alarm and is sustained even after the product is rebooted.
* Once 3-minute Lock mode is on ther Fake PIN Code will not work until the next normal verication
(Card key verication, User PIN Code, open door from inside). In this case, please open the door with User PIN Code.
Method 1
Method 2
Touch with palm Touch with palmPress Any button Press PIN Code
Touch with palm Touch with palmPress PIN Code Press Any button
Safety Feature

13
Install Remote Control Module
Remote Control Module
Remote Control Module
Remove batteries Install Remote Control Module
Insert batteries Insert batteries
Ting-a-ling
Buy the Remote Control Module and install it to link the Remote Control.
Open the battery cover
in the Back Body
and remove
all batteries.
Insert all the batteries by
checking the
connector.
Equip the
Remote Control Module
to the connector.
Optional Accessory
Insert all the batteries by
checking the
connector.

14
To Register Remote Control
To Release Remote Control
Remote Control
Enter number 7and then 5on the keypad.
Open the battery cover in the Back Body.
Press (Registeration) button and then .
Press the (Registeration) button in the Back Body again to
complete the procedure.
Step Icon Description
Step Icon Description
Press (Registration)
button and
Press (Registration)
button
Enter number 0 and
5on the keypad
Register
Remote Control
Enter number 0and then 5on the keypad.
Press the SET button on the Remote Control.
(Up to 5 Remote Controls)
Press the (Registeration) button in the Back Body again to
complete the procedure.
Open the battery cover in the Back Body.
Press (Registeration) button and then .
Enter number 7 and
5on the keypad
Press (Registration)
button and
Press (Registration)
Optional Accessory

15
Emergency Power
Emergency Power Supply for Discharged Batteries
Emergency Power Supply for Discharged Batteries
Expiry Period
The product uses four 1.5V Alkaline AA batteries. They may sustain 1 year if used 10 times a day.
(Users are advised to use authentic alkaline batteries.)
Low Battery Alarm
You must replace all 4 batteries for the following cases:
The Low Battery Lamp on the Front Body lights on
The alarm melody will sound (a nursery rhyme starting
with ting-a-ling melodies)
You may open a door when contacting the 9V battery.
The battery life vary depending on temperature, moisture levels,
Frequncy of use and the quality of the batteries.
Contact the
9V Alkaline battery
Open the emergency cover. Keep contacting the 9V
Alkaline battery onto the emergency power supply terminal.
Touch the keypad gently with your palm.
Enter each number of User PIN Code.
Touch with a palm
Enter User PIN Code
Touch with palm
or Enter button.
Touch the keypad gently with your palm or
Enter button to conrm.
Step Icon Description

http://www.yalelock.com

YDG313
ѣᮽ㉗௤䃠᱄ᴮ

2
䄁㼓㖤᯲ᡬཌ
䄁ԛᐛޭᮨᬀ⭘૷
䄁ԛу᱄ᶆ䌠
ᬜᤣ␻▊⭘૷
䄁ؓᤷ⭘૷␻▊
䄁⢘䁎ᛞⲺᇼ⻲ ⮬ᛞཌ࠰ᱸ䄁ᗻ
⻰䃃䮶ᱥᐨр䧌
䄁Աᝅ᣼ম䠃㍺ 䄁ԛ␻≪⴪᧛⋌⍍
⭘૷ᡌԛᆮ⭘૷ᬜᤣ
䁣㖤䴏䯁䮶䮶䧌ᱸ
ж䛀Ⲻ䮶ᗻؓᤷ
䰒䮿⣶ខ
ᢁᐴ
⌞ᝅӁ主

3
⭘૷⢯㢨
䙨䳄⁗ᕅ (Advance Mode )
ᨆבᛞᴪሾᾣᴪ儎ؓᆿⲺֵ⭞⁗ᕅ
Ჰឝශ䨗䶘䀮᧝䶘ᶵ (Magic mirror touchpad)
⢯⇀㗄㿶䨗䶘䁣䀾ف࡛Ⲻᮮᆍ⟾㲕䮹⡃ᯯᕅ
ԛ઀⸛ֵ⭞㘻ྸ֋䁣ᇐ主ᬃ֒ࣕ㜳
ᆿޞᢁᰁ䡋 (Safe Knob)
⛰ࣖᕭ䱨ⴒᙝ㜳⭘૷᧗⭞⢯⇀㎆ Ⲻᢁᰁ䡋ᢶ㺉
ᗔޝ䜞⭞ᢁᰁ䡋䯁கᱸ䴶ᱸ᤿օᰁ䡋рޟ䛀᤿䡋ᢃ䯁க
䎻㮺䁣䀾 (Modern & Thin design)
ֵ⭞Ҽ䎻㮺䁣䀾ᨆ儎㠽䮶Ⲻ㎧жᙝ䕋ᐝ㗄㿶
ᣍ儎༉䴱ᬀ䘪䐥ᢶ㺉 (Anti-shock)
ᵢ⭘૷᧗⭞ᣍ儎༉䴱ᢶ㺉ྸ䙽儎༉䴱㺓ᬀࡽᴹ㠠࠽ᯭ䴱䐥
ؓ䆭⭘૷ࣖᕭ䱨ⴒᙝ㜳
㏨䐥ⴈ䚮䞃
ᛞԛֵ⭞䚮䞃Ⲻ㏨䐥ⴈ䚏᧝ಞ䯁க䮶䧌
ᆹԛ䙙㎆㠩ᮮփᇬᓣ❗㐐ᆿޞⴙ᧝㌱㎧

4
⌞ᝅ
䴱⊖ֵ⭞༳ળדⓡ☋ᓜֵ⭞乱⦽⭘૷૷䌠ᴿᡶᐤ⮦
⮬ᛞ䀸䌲ᱸ䄁󱁹ḛᡶᴿ䴬Ԭ䞃Ԭ
㤛ᕭݿ䲳ݿ䮭ᱸ䯉⴪᧛➝ሺᵢ⭘૷ཌ㿶亅㢨㜳ᴹ᭯䇀䳒Ⱦ
ะᵢ ᡆ૷
䚮䌲૷
㿅Ṳ
㷰㎨ ௤䯁䮶
⭞⻷䩫
ᇚཌ䜞
ࢃ䶘ᶵ
ᇚޝ䜞
ᗂঀ䜞
ծ㑤䧌㡂 PP
䮶৐ເ⡽
5),'গ⡽഑ᕫ
ֵ⭞䃠᱄ᴮ
㏨䐥ⴈ
䚏᧝ಞ
䴏䯁䮶⭞⡽
ᇚཌ䜞 14(D) x 72.8(W) x 186(H)
48.8(D) x 77.5(W) x 190.5(H)
4EA 1.5 AA alkaline batteries
(Operating voltage: 4.5 ~ 6V)
Operating temperature :
電池約可使用一年
(以一天10次開關計算)
ᇚޝ䜞
䴱⊖
SpecificationsParts Remarks
᯳ᐛൌ
⭘૷ԁ㍯