YAMAN M22 User manual

27
M22
Table of Contents
Safety Precautions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1
Use in Foreign Countries • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7
Names of Components • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8
Before Use• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 9
How to Use • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 15
After Treatment • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 20
Troubleshooting • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 21
After-sales Service • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 24
 Product Specifications• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 26
User’s Manual
Home Use Beauty Device
Photo PLUS Prestige SP
M22-1-001E
Before using this product, please read these instructions carefully.
 Please read this User’s Manual carefully for information on how to use the device properly and safely.
 After reading the contents hereof, be sure to keep this User’s Manual in an accessible location.
 Be sure to include this User’s Manual if you are transferring ownership of the device to another person.
English User’s Manual come with this product.
Please download the other language’s User’s Manual version
from this link (https://www.ya-man.co.jp/en/support/documents/)
or scan with QR code with your camera phone.
Please carefully read User’s Manual to ensure safe and proper
use of the device. TO ACCESS SCAN WITH
YOUR CAMERA PHONE

Safety Precautions
WARNING
The following individuals should not use the device:
Prohibition
・
Read these Safety Precautions carefully before using the device in order to use it correctly.
・
Use the device sensibly in accordance with the prescribed steps.
・
Immediately discontinue use and arrange to have the device repaired if any abnormality occurs.
・
Do not use the device while it is in a defective state, as doing so could cause physical harm to the user.
・
The precautions listed in the User’s Manual are very important. For your safety, please follow them
carefully.
・
Precautions are classified as DANGER, WARNING, or ATTENTION in order to clearly specify the level of
danger and possible injury or damage that may occur if the device is misused.
 Classifications of Precautions
 Symbols
* “Property damage” refers to expanded damage affecting a dwelling, household belongings,
or domestic animals and pets.
WARNING Improper use of this device may pose a risk of death or serious injury.
DANGER Improper use of this device poses a severe and likely risk of death or
serious injury.
ATTENTION
Improper use of this device may cause an injury or property
damage*.
This symbol shows you what you must not do.
This symbol shows you what you must do.
This symbol shows you what you must be careful with.
DANGER
The following individuals should not use the device:
Use of the device could cause electronic medical devices to malfunction.
◆ Do not use the device in conjunction with any medical electronic equipment, including:
・
pacemakers or other implanted electronic medical devices,
・
artificial heart-lung machines or other electronic life-support medical devices
・
electrocardiographs or other worn electronic medical devices.
Prohibition
21
Safety Precautions
Safety Precautions
Failure to comply may cause skin
problems or physical ailments.
Do not use the device for a long
time over areas where the skin is
thin or areas above bones.
Prohibition Failure to comply may cause
physical injuries.
Do not overuse the device. For
usage time and frequency, follow
the instructions in the User’s
Manual.
Prohibition
Failure to comply may cause injuries
or skin problems.
Before use, check to make sure
the electrode and treatment head
are not cracked, deformed or
broken. Do not use the device if it
is damaged or malfunctioning.
Prohibition
Failure to comply may cause accidents or other problems.
• If you have existing or suspected epilepsy, heart disease, or related disorders
• If you are unable to express your intentions on your own
• If you are unable to sense temperature or stimulation
• If you have an autoimmune disease
Do not allow physically challenged persons to use the device unattended.
Consult a physician prior to use under the following conditions:
• If you have an acute disease • If you have an infectious disease
• If you have a malignant tumor • If you have a febrile disease
• If you have high blood pressure or a blood disease • If you have a fever
• If you have sensory impairment due to severe peripheral circulatory dysfunction (e.g. diabetes)
• If you have a nerve damage • If you have a skin disease or atopic dermatitis
• If you are a hospital outpatient and are taking medication
• If you have a pre-existing skin condition, such as an allergic constitution or contact dermatitis,
or if you have a concern about your skin when using this device
Do not use in the following cases or on the following areas.
Failure to comply may cause accidents or other problems.
• If your skin is damaged, experiencing a rash, inflammation, or other abnormalities
• If you are under the influence of alcohol
• Anywhere inside the mouth, around the pubic region, or any mucous membrane
• Eyeballs • Upper eyelids (except in COOL Mode)
• Lower eyelids, outer corner of the eye (except in EYE CARE Mode and COOL Mode)
• Throat • Bulging moles • Viral warts • Sites where you have broken a bone
• Areas of internal bleeding, swelling or scabbing after cosmetic medical procedures
* Avoid using the device for 2 weeks after cosmetic medical procedures. After this period, consult with
a physician and only use the device if the physician confirms there is no problem. (e.g. Hyaluronic
acid injections, silicone injections, Botox, thread lifts, double eyelid surgery, HIFU, etc.)
• Areas where metal was implanted by surgery (reconstructive surgery, plastic surgery, cosmetic
surgery, etc.)

43
Safety Precautions
Safety Precautions
WARNING WARNING
• In bathrooms or near bathtubs, showers, washbasins or other containers filled with water
• A dusty location
• Outdoors or a location where there is exposure to direct sunlight
• A slope or a location where there are vibrations or shocks
• A location where there are strong radio waves or magnetism
• Near a flammable substance (such as alcohol, thinner, benzene, nail polish remover or spray).
• A location where there is exposure to oil smoke or steam
• A location that may become hot, such as near a heating device (e.g. a heater)
• A location with drastic temperature changes (e.g. near an air conditioner or heater)
Failure to comply may cause a fire, electric shocks, accidents, malfunction of the device,
falls or injuries.
Do not use, store or charge the device in the following locations:
Prohibition
Failure to comply may cause the
electrodes to stick to and damage
the skin.
Do not use at a temperature
below the specified ambient
temperature.
Prohibition
Inquiry the Global After Service
(https://www.ya-man.co.jp/en/support/
repair/) or your local distributor and
use the dedicated AC Adapter. Do not
connect anything other than the rated
power supply (DC9V 2.0A).
Do not use the device if the AC
adapter is damaged.
Prohibition
Failure to comply may cause a fire or
other accidents.
Do not leave the device
unattended while it is turned on.
Prohibition
Failure to comply may cause an
electric shock or a fire due to a short
circuit.
Be sure to turn off the power before
pulling out the plug.
Do not pull out the plug from a
power outlet or pull out the plug
from the device during use.
Prohibition
Failure to comply may cause
accidents or injuries.
Children should obtain the consent
of their guardians before using the
device and should only use it under
the supervision of a guardian or a
specialist.
User
restrictions
Failure to comply may cause
accidents or injuries.
Keep the device and AC adapter
away from children and do not
allow them to use it alone.
Children shall not play with the
appliance.
User
restrictions
Non-intended
uses are
prohibited
Failure to comply may cause a
malfunction of the device or an injury.
Do not use the device for any
purpose or in areas other than
those stated in the User’s
Manual.
The device features a built-in
rechargeable battery.
Failure to comply may lead to the
generation of heat, a fire or
explosion.
Do not dispose of the device in a
fire or place it near fire or flames.
Do not use, charge or store in a
high-temperature or
high-pressure area.
Combustion
warning Failure to comply may cause an
electric shock, short circuit, fire, or
malfunction of the device.
Contact your local distributor for
advice on repairing the device.
Do not use if the AC adapter is
damaged or if the wall socket is
too loose.
Use of a
damaged cable
or plug is
prohibited
Failure to comply may cause a fire
or electric shock.
If the device is dropped or
damaged, turn off the power
immediately, pull out the plug,
and request a repair/inspection.
Must Comply
Failure to comply may cause a fire,
electric shock or other accidents.
* The free-repair warranty is only
valid in Japan.
Failure to comply may cause a
fire, electric shock or other
accidents.
Must Comply
Failure to comply may cause a fire,
an electric shock or other injuries.
Contact your local distributor for
advice on repairing the device.
Do not disassemble, attempt to
repair or modify this device in
any way.
Disassembly
is prohibited
Failure to comply may cause an
electric shock, short circuit, fire, or
malfunction of the device.
When disconnecting the plug
from a power outlet, be sure to
pull it out by grasping its head
instead of the cord (do not touch
the metal parts). Do not insert or
disconnect the plug with wet or
damp hands.
Removing
the plug
Failure to comply may cause a fire
or electric shock.
If you feel an earthquake, see
lightning or hear thunder, turn
off the power and unplug the
device.
Removing
the plug
Make sure to disconnect the AC
adapter from a power outlet after
charging is completed. Failure to
comply may cause a fire or other
accidents.
After using the device, when the
device is not in use and when
cleaning it, be sure to turn off the
power and remove the plug from
a power outlet.
Removing
the plug
Failure to comply may cause an
electric shock, a short circuit or a
fire.
Always use the dedicated AC
adapter.
Prohibition
Failure to comply may cause an
electric shock, short circuit, fire, or
malfunction of the device.
Do not exceed the rated capacity
of a power outlet or wiring
accessory (do not connect too
many plugs to one outlet).
Overloading of
an electric circuit
is prohibited
Failure to comply may cause the
cable to break, resulting in a fire or
an electric shock.
Straighten out any twists in the cord
before storing.
Do not damage, modify, bundle,
twist or otherwise apply undue
force to the AC adapter.
Careless or
reckless use
is prohibited

56
Safety Precautions
Safety Precautions
ATTENTION
Pressing the device stronger than
necessary or using it intensively on a
single area may damage the skin.
Do not press the device strongly
or use it intensively on a single
area.
Prohibition
Failure to comply may lead to
accidents due to malfunctions of
the device.
Do not allow the device to come
into contact with another
beauty device or electronic
appliance while the power is on.
Do not use with other electronic
products (electric blankets/bed
sheets, heated tables, etc.) at
the same time.
Prohibition
Failure to comply may cause
accidents or injuries.
Do not use while driving.
Prohibition
If the mode is used for continuous
treatments, the head will not
become fully cool.
Have an interval of at least
30 minutes between treatments.
Do not use COOL Mode
continuously.
Prohibition
The main unit is water-resistant
(IPX4). Do not intentionally splash
water on the device as it is not
designed to withstand strong water
pressure from showers or faucets,
nor to be submerged in water.
Failure to comply may cause a
malfunction of the device.
Do not expose the device to
strong water pressure from
showers or faucets nor submerge
it in water.
Prohibition
Stop using the device immediately if
the treatment does not agree with
your skin. If symptoms persist the
following day and beyond, consult
a physician.
Check carefully that your skin is
not showing any abnormalities
during the treatment. Stop using
the device immediately if you
start to feel pain, fatigue or if
you see any skin reaction during
use.
Must Comply
Make only gradual adjustments to
the intensity level. Failure to comply
may cause accidents or injuries.
Use only Level 1 upon the first use
and until you are accustomed to
use.
Even if you do not feel any
stimulation, make only small
adjustments to the intensity
level.
Use the device at an intensity
level that suits you.
Must Comply
ATTENTION
When using on the same area
again, be sure to leave an interval of
24 or more hours between
treatments. Excessive use may
damage the skin. The above
recommendations are guidelines
only; please observe your skin
condition and use the device
accordingly.
Avoid using the device on the
same area for longer than 14
minutes.
Must Comply
You may feel strong irritation or
discomfort due to EMS on your
cheeks or chin.
If you feel strong discomfort,
consult a physician.
If you are currently undergoing
dental treatment or have teeth
fillings, choose a lower intensity
level and apply the device to a
different area.
Must Comply
Failure to comply may cause an
accident.
If a power failure occurs, turn off
the power immediately and
unplug the device from the power
outlet.
Removing
the plug
Failure to comply may cause
damage to your eyes or skin.
Do not look directly into the LED
light. When using the LED light
to treat the upper eyelids, lower
eyelids and outer corners of the
eye, be sure to close your eyes
and keep the electrode head at
least 5 cm away from the skin.
Prohibition

Use in Foreign Countries
87
Names of Components
Use in Foreign Countries
 Main Unit
Indicator
DWHP Button
LEVEL Button
POWER/MODE Button
Adapter Plug Insertion Port
Electrode Head
LED Lamps
 Cotton Stopper
(Silver Ring)
 AC Adapter
* The design and specifications of the device and accessories are subject to change for improvements
without prior notice.
* The cotton stopper is attached to the electrode head when
purchased.
* Use this stopper to fix a cotton pad to the electrode head.
[Accessories]
Names of Components
WARNING
Failure to comply may cause a fire, electric shock or malfunction of the device.
Use the device at AC100~240V only to avoid a potential fire or electrical shock
hazard.
Must Comply
Failure to comply may lead to the generation of heat, fire or malfunction of the device.
Be sure to check the plug configuration and the voltage of the power outlet before
use.
Combustion
warning
 The plug configuration and voltage may vary depending on the region and the type of accommodation.
Always be sure to check for compatibility before using the device.
 For information about plug adapters, consult a consumer electronics retailer.

109
Before Use
Before Use
Use only Level 1 upon the first use and until you are accustomed to use.
5 levels are available; choose the level you feel more comfortable with.
Each time the LEVEL button is pressed, the level will change.
 Level Indicator
The device remembers the level being used when the last treatment mode ended, and returns to the same
level settings the next time it is switched on.
 Personal memory function
Each time you press the POWER/MODE button, the treatment mode will be selected in the following order:
CLEAN → NEB → EMS UP → EYE CARE → COOL → CLEAN (repeat)
 Mode Indicator
CLEAN
RF / ion
derivation
* In CLEAN Mode, RF and ions are output alternately. When is displayed, RF is output, and when
is not displayed, ions are output. The display or non-display of in NEB/EYECARE Mode is not linked
to actual RF output.
ModeFunctionsMode Indicator
Before Use
• Press and hold the POWER/MODE button for
about 3 seconds to turn on the device.
(The treatment will automatically start with Clean
Mode.)
• Treatment mode can be changed by pressing the
POWER/MODE button during operation.
• For CLEAN, NEB, EMS UP and EYE CARE
Modes, you can select the treatment level.
Each Mode has 5 intensity levels that can be
adjusted with the Level / Vibration button.
• When using the device in NEB Mode, press the
DWHP button to switch DWHP ON or OFF.
• Press and hold the POWER/MODE button for
about 3 seconds to turn the power off.
How to Read the Panel
 Indicator and Buttons
Charging Indicator
DWHP Button
LEVEL Button
POWER/
MODE Button
Level Indicator
5 levels
Mode
Indicator
CLEAN
NEB
EMSUP
COOL
EYE
CARE
RF/
Micro-currents/
Eyes only EMS
EYE
CARE
DWHP OFF DWHP ON
RF / DYHP /
DWHP /
LED
(Red / Orange)
RF / DYHP /
LED (Red / Orange)
EMS /
LED (Red)
EMS
UP
NEB NEB
Cooling/
LED (blue)
COOL
NEB
(Use the DWHP button to switch
between the following)

1211
Before Use
Before Use
Pre-testing on Skin
* When using the device or a cosmetic product for the first time, always test for compatibility.
1Clean your skin.
• Wash the inner side of your arm with soap and water, then wipe dry with a towel.
• Remove all metal accessories (watches, necklaces, rings, earrings, etc.) when using the device.
Failure to comply may cause accidents or injuries.
2Apply water or skincare product (gel or lotion) on the inner side of your
arm and apply NEB (with DWHP ON) Mode treatment for 3 minutes.
• Do not wet or rub the pre-testing area.
If you experience any skin abnormality (redness or burning sensation) at the pre-testing
area within 24 hours, stop using the device.
ATTENTION
• Be sure to perform a pre-test in order to prevent skin problems from occurring.
• If a rash, reddening, itchiness, stinging sensation or other abnormalities occur at
the pre-testing area, immediately stop the pre-test and wash the area.
• Do not use the device if any skin abnormalities are perceived.
The charging indicator lights up/flashes from 1 to 3 depending on
the level of charge.
When using without an electric cord: light is on
When using while charging: light is off
Charging: Flashing
When charging has completed, the charging indicator will turn
solid.
* When using the device without an electric cord, if the battery
level is insufficient, the device will beep 3 times, the charging
indicator will flash 3 times and the power will be turned off.
 Charging Indicator
At the end of CLEAN/NEB/EMS UP/EYE CARE Mode, standby mode* is activated and the next mode
display starts flashing. Standby time after the end of each mode is about 5 minutes.
* When you press the POWER/MODE button, the next mode waiting in Standby mode will start.
* If the next mode is not started within approx. 5 minutes, the device will be turned off automatically after 2
short beeps.
 Standby
If the device is not operated within approx. 5 minutes of going into standby mode, it will be turned off
automatically after 2 short beeps.
At the end of COOL Mode, the device will be turned off automatically after 2 short beeps.
 Auto-off (Automatic Power-off)
Output will be reduced automatically for safety reasons when the temperature on the skin or the electrode
head rises.
If the temperature becomes too high, the power will be turned off for safety after 10 short beeps.
If this happens, let the device rest for about 30 minutes.
 Temperature sensor
Measures the current output value and controls the output.
 Current sensor
The motion sensor detects movement of the device and pauses output for safety reasons when the electrode
head has been used on the same area continuously.
When movement of the device slows, the motion sensor may reduce the level of warmth.
 Motion sensor
This product is splash resistant and can be exposed to small splashes of water. However, it cannot withstand
strong jets of water from showers or faucets, nor can it be submerged in water. Also, it cannot be used in
bathrooms. We recommend caution when using it.
• The device is equivalent to IPX4 (JIS standard) waterproof.
• The AC adapter is not waterproof.
 Water-resistance
(Flashing)
<Charging> <Fully charged>
(Solid lighting)
When about half of the mode setting time has elapsed, you will be notified by a beep.
Use it as a guide to switch to treating the other side.
 Timer alarm function

1413
Before Use
Before Use
This product is rechargeable and can be used either without an electric cord or by connecting it to an AC
adapter.
Always use the device after charging when you use device without an electrical cord.
• Before using for the first time, or if you have not used the device for an extended period, fully charge the
battery and make sure that the Charging indicator has turned from flashing to solid, indicating a full
charge.
• Make sure that there is no water on the adapter plug insertion port
Failure to comply may cause an electric shock, short circuit, fire, or malfunction of the device.
Charging the Battery
 Charging the Battery
1Insert the AC adapter plug into the adapter socket of the main unit.
3After charging is completed, disconnect the AC adapter plug from the
wall outlet, then disconnect the adapter plug from the device.
2Plug the AC adapter into the power outlet.
• Use only the supplied exclusive AC adapter with this device.
• Plug the AC adapter directly into the wall socket. Do not use an extension cord or multiple
connection adapter.
• When charging begins, the Charge indicator will flash. When charging has completed, the
charging indicator will turn solid.
 Estimated Charging Time
Charging time Operating Time
Approx. 3 hours Approx. 30 minutes
* Charging at room temperature of approx. 25°C.
* Operating time when fully charged.
* Operating time may vary depending on the
operating mode, operating level and/or operating
environment.
* Actual charging time will differ depending upon the
remaining battery and the charging environment.
About Treatment Modes
• Be sure to move the device over the skin as you use it (except in EYE CARE Mode and COOL Mode).
• If the COOL Mode is used for continuous treatments, the head will not become fully cool. Have an interval
of at least 30 minutes between treatments.
Mode Functions Cotton Operating time FrequencyLevel
Approx. 3 minutes
• RF
• DYHP
• LED (Red / Orange)
5 levels
DWHP
OFF
• RF
• DYHP
• DWHP
• LED (Red / Orange)
5 levels
DWHP
ON
Either
• EMS
• LED (Red) 5 levels
Approx. 3 minutes
EMS UP Without cotton
Follow the order indicated below. Use the product after washing your face.
• RF
• Micro-currents
• Eyes only EMS
Approx. 2 minutes 5 levels
EYE CARE Either
5 times
a week
• COOL
• LED (Blue)
Approx. 3 minutes N/A
COOL Without cotton
Everyday
use is
possible
2 to 3 times
a week
• RF
• ion derivation
Approx. 3 minutes 5 levels
CLEAN With cotton
2 to 3 times
a week
Makeup removal Cleansing→This product→
NEB
(Use the
DWHP button
to switch
DWHP ON or
OFF )

15 16
How to Use
How to Use
How to attach a cotton pad to the electrode head
1Remove the cotton stopper
from the electrode head.
2Place a cotton pad on top of the electrode head and
press the cotton stopper down over the cotton pad.
* If the cotton stopper does not fit properly on the electrode head, please use a larger and thinner
cotton pad. Because thick cotton pads are difficult to fix in place, split them in half before use.
* If the cotton pad is too thick, the thermal action of the RF treatment may be adversely affected and
you will feel less heat.
3Apply your regular skin lotion or gel onto the cotton pad.
* Make sure the skin lotion or gel coats the entire surface of the electrode head.
* If using a watery (low-viscosity) skin lotion, the feeling of warmth may decrease.
Recommended skin lotions: high-viscosity skin lotions
* Be sure to thoroughly wipe off any lotion or gel left on the device with a dry cloth after each use.
How to Use
1Remove makeup and gently cleanse your face.
* Make sure to remove makeup before using the device on your face. If you use the device over
makeup, the foundation may cause dark staining of the skin.
• Remove oil and dirt from your skin so that it is in a clean condition prior to treatment.
* COOL Mode can be used over makeup.
3Press and hold the POWER/MODE button for approx. 3 seconds to
turn on the power. Select mode and intensity level.
• Select the mode using the POWER/MODE button.
• Select the intensity level using the Level button.
* Use only Level 1 upon the first use and until you are accustomed to use.
2Attach a cotton pad if necessary and apply skin lotion onto it.
 Treatment Method
After treatment, condition your skin as necessary.
• Please apply skin cream as appropriate.
* After each use, refer to ‘After Treatment’ (page 20) and remove the remaining sebum, serum and
other particles stuck to the device.
Failing to remove them may cause a malfunction of the device or skin problems.
6
4Gently apply the electrode head to your skin and move the head over
the area being treated. Refer to pages 17-19 for more details.
• At the end of each mode, standby mode is activated (for about 5 minutes), and when the
POWER/MODE button is pressed the next mode starts.
* During use, make sure the electrode head is firmly touching the skin.
5Press and hold the POWER/MODE button for approx. 3 seconds to
turn off the power.
* When treatment in COOL Mode has finished, the power will turn off automatically.
* Be sure to replace the cotton pad used in CLEAN Mode.
How to Use (General Instructions)
 Precautions
 Be sure to move the device over the skin as you use it. Do not stop on one spot as this may
cause burns.
 The perceived warmth of the RF changes depending on the type of skin-care product used and
the skin’s condition at the time of treatment.
 Do not use on the upper eyelids (except in COOL Mode), lower eyelids or outer corners of the
eye (except in EYE CARE Mode and COOL Mode).
*
The LED light can be used over the upper eyelids, lower eyelids and outer corners of the eye. Close
your eyes and hold the device at least 5 cm away from the eyes. Do not look directly into the LED light.
 Do not look directly into the LED light.
 The recommended ambient temperature is 15° C to 30°C.
 Remove all metal accessories (watches, necklaces, rings, earrings, etc.) when using the device.
Failure to comply may cause accidents or injuries.
 Please carefully clean the parts of the device that come into contact with the skin every time
you use it and keep the device clean at all times.
Failure to comply may cause skin problems.

17 18
How to Use
How to Use
How to use the device on your skin
<CLEAN, NEB Mode>
Areas you should not treat
Move the electrode head over the skin in the direction of the arrows shown below.
Areas that can only be treated with LED light
(Refer to page 19 for how to use)
* Close your eyes and hold the device
at least 5 cm away from the skin.
Recommended speed for moving the device: 2 cm/second
Left side
One beep
Standby
Approx.
5 minutes
Three short beeps
About
90 seconds
About
90 seconds
Right side
Areas you should not treat: Upper eyelids
<EYE CARE Mode>
Press the electrode head repeatedly on your face from the inner to the outer corners of the eye as if stamping
on the skin (Press → Release → Move electrode head).
* Be sure not to press down continuously on the skin for longer than 3 seconds.
* Do not move the device while pressing.
If you are concerned about dryness around your eyes,
we recommend applying EYE CARE Mode for approx.
2 minutes for each side (4 minutes in total).
* Lower eyelid and the outer corners of the eye
can be treated.
Estimated pressing time: approx. 3 seconds for each point
Press and move the device in a circular,
massaging motion as indicated by the arrows.
<EMS UP Mode>
Areas that can only be treated with LED light
(Refer to page 19 for how to use)
* Close your eyes and hold the device
at least 5 cm away from the skin.
If you feel an unpleasant tingling on your skin, reduce the intensity level or move to another area.
You could also moisten the skin with water, lotion or gel before using the device.
Failure to comply may cause skin damage.
• Please reapply skin-care products or water during treatment to ensure there is always some liquid between
the electrode head and the skin. If there is an insufficient amount of skin-care products or water, the
stimulation will weaken, causing skin problems.
• If the temperature feels too hot, move the head more quickly. You can also use a cotton pad to lower the
temperature.
• Use the device in a position in which the entire surface of the electrode head comes in contact with your
skin.
• Be sure to move the device over the skin as you use it.
Placing the device continuously on the same area may cause burns or low-temperature injuries.
• Do not put the electrode head on the upper eyelids, lower eyelids or outer corners of the eye.
Left side
One beep
Standby
Approx.
5 minutes
Three short beeps
About
90 seconds
About
90 seconds
Right side
Left side
One beep
Standby
Approx.
5 minutes
Three short beeps
Approx.
1 minutes
Approx.
1 minutes
Right side

19 20
After Treatment
After Treatment
1Ensure the power is off and unplug the AC adapter from the main unit.
2To clean the treatment head and cotton stopper, wipe with a damp and
well-wrung cloth to remove any dirt. Wash the cotton stopper with
water.
• Remove the cotton stopper from the main unit and wash it with water before wiping it dry.
• Do not wipe the device with solvents such as alcohol, thinner, benzene, nail polish remover,
kerosene, chemicals or polishing powder.
Failure to comply may cause damage to the surface of the device.
• After using the device, thoroughly wipe off any remaining lotion and gel, ensuring none is left on the
device. Failure to comply may cause a malfunction of the device.
3Wipe off any dirt from areas other than the electrode head and cotton
stopper with a dry cloth.
 How to clean and store the product
Storage
 When the device is not in use for a long period of time, turn off the power and disconnect the AC adapter
from the main unit and wall socket before storing.
 Avoid storing the device near a heater or in a bathroom or other high-temperature/high-humidity
locations. Also, avoid unstable locations or places where there is exposure to direct sunlight.
 Keep the device out of the reach of children.
 Cleaning and user maintenance shall not be made by children without supervision.
Maintenance and Inspections
 When you have not used the device for a long period of time, check to see that it is functioning normally
before re-starting use. Failure to comply may lead to an accident or malfunction of the device.
 If the device is malfunctioning, go to ‘Checklist for Possible Problems’ (pages 21-22) and attempt to identify
the problem before arranging to have the device repaired. If the problem persists, inquiry the Global After
Service (https://www.ya-man.co.jp/en/support/repair/) or your local distributor.
 If the device malfunctions, appears damaged or needs service, please contact your local distributor.
* Please carefully clean the parts of the device that come into contact with the skin every time you use it and
keep the device clean at all times.
Failure to comply may cause skin problems.
<COOL Mode>
 How to treat the upper eyelids, lower eyelids and outer corners of the eye
using the LED light in NEB, EMS Up or COOL Mode.
Remove the cotton pad, close your eyes and hold the device at least 5 cm away from the skin to use
the LED light.
Power-off
Left side
One beep
Beeping sound
About
90 seconds
About
90 seconds
Right side
Press the electrode head repeatedly on your face
as if stamping on the skin (Press → Release →
Move electrode head).
* The device can also be used over the lower
eyelids and outer corners of the eye.

2221
Troubleshooting
Troubleshooting
Problems Possible Causes and Solutions
EMS causes uncomfortable
tingling or pain.
→Lower the intensity with the Level button.
→The entire surface of the electrode head is not touching skin. Use a
mirror to check that the entire surface of the electrode head is
touching the skin.
The EMS feels weak or I
cannot feel it at all.
→Increase the intensity with the Level button.
→The skin lacks moisture or is dry. Moisturize your skin with lotion or
gel.
→
You are not applying the device along muscles. Verify that you are
applying the device along muscles with the help of a mirror (page 18).
→There is an insufficient charge. Charge the battery (page 13).
Alternatively, use the device by connecting it to an AC adapter.
The treatment temperature
is too high (except in COOL
Mode).
→You have been using the electrode head on your skin for a long
time. Be sure to move the electrode head over your skin when using
the device, except in COOL Mode.
→The electrode head moves slowly. Move the device a little more
quickly.
→It may feel very hot depending on the skin-care product used or the
presence/absence of a cotton pad. If it feels hot, try the following:
• Use the device without a cotton pad.
• Change the skin-care product used.
You cannot feel RF warmth.
→
The device is in standby or Auto-off status (page 11). Turn the
power off and then on again, or activate the modes by pressing
the POWER/MODE button.
→The skin lacks moisture or is dry. Moisturize your skin with lotion or
gel.
→The electrode head moves fast. Please move the device a little
slower.
I can’t select the level. →There is no intensity level selection available in COOL Mode.
The device cannot be
operated. →Press the LEVEL button and the POWER/MODE button at the
same time (reset)
COOL Mode is not very
cool.
→Cool Mode is being used continuously. Turn off the device and
wait at least 30 minutes before using it again.
→
The device is being used in an environment where the temperature
exceeds the recommended range. Use the device within a
temperature range of 15 to 30°C.
Troubleshooting
Checklist for Possible Problems
The device does not turn on.
→Press and hold the POWER/MODE button for about 3 seconds to
turn the device on (page 16).
→There is an insufficient charge. Charge the battery (page 13) or
use the device with an electrical cord.
The device shuts off.
→
If you hear 3 long beeps before it shuts off, the battery is
insufficiently charged.
Charge the battery (page 13). Alternatively, use the device by
connecting it to an AC adapter.
→
If the device is left at low temperature for a long time, it may turn
itself off. Leave it at the recommended ambient temperature of 15° C
to 30° C for a while, check the charging status and try again.
Device does not start
charging (charge indicator
does not flash).
→The adapter is not plugged into the device. Plug adapter into the
device (page 13).
→Plug the AC adapter into the wall socket and press the LEVEL
button and POWER/MODE buttons at the same time while the
power is off (reset).
The device is too warm. →The device is being used continuously. Turn off the device and wait
at least 30 minutes before using it again.
The device only operates for
a few minutes even after
charging.
→There is an insufficient charge. Charge the battery (page 13).
Alternatively, use the device by connecting it to an AC adapter.
→
You may have pressed the wrong button. Press and hold the
POWER/MODE button for about 3 seconds to turn the device on
again (page 16).
→The device is in standby or Auto-off status (page 11). Press the
POWER / MODE button.
→If the device is used at low temperature, the power may switch off
immediately. Use the device while charging it.
→
The expected life of the rechargeable battery (approximate number
of charging times: 300 times) has expired. Inquiry the Global After
Service (https://www.ya-man.co.jp/en/support/repair/) or your
local distributor.
* Do not try to replace the battery by yourself as this may cause a
malfunction of the device.
Problems Possible Causes and Solutions

23 24
 Rechargeable Battery
This appliance contains batteries that are non-replaceable.
• The rechargeable battery is a consumable item (It is not covered by warranty).
• If the operation time after charging has become extremely short, it could be the end of the battery’s useful
life. The battery can be charged approx. 300 times.
• Consult the Global After Service (https://www.ya-man.co.jp/en/support/repair/) or your local distributor
for battery replacement.
 Disposing of the device
 Follow your local government rules for proper disposal of this product.
 This product uses a lithium-ion storage battery. For information on the disposal of
batteries, see Disposing of the Battery and Removing the Battery on the following pages.
The lithium-ion battery used in this product is a valuable recyclable resource.
• The battery must be removed from the appliance before it is disposed.
• Be sure to turn off the power and disconnect the AC adapter before removing the batteries.
• Use a screwdriver to remove the battery. Be careful not to injure yourself.
• When removing the battery, be careful not to damage it on a hard object.
* Failure to comply may cause the generation of heat or a fire.
• Follow your local government rules for proper disposal or recycling of this product.
<Disposing of the Battery>
After-sales Service
After-sales Service
Frequently Asked Questions
Q A
How much lotion or gel
should I use each time?
This device is designed to achieve better results with sufficient use
of lotions and/or gel.
As a general guide, when using cotton pads, be sure the entire
electrode head is moistened with face lotion.
Use about two pearl-sized drops of gel.
We recommend adding more lotion or gel if you feel there is not
enough.
Can I use this product in
the bath?
Also, can I wash the main
unit with water?
The device cannot be used in the bath (bathroom, tub).
The main unit is rated JIS-compliant IPX4, which means that it is
resistant to splashes but cannot withstand strong jets from
showers and faucets, nor can it be submerged in water. The main
unit cannot be washed with water as this may cause a malfunction
of the device. Only the cotton stopper can be washed with water.
Why do I not feel the
warmth of RF when using
CLEAN, NEB or EYE CARE
Modes?
Move the electrode head more slowly or press harder against the
skin surface.
It is also possible that there is insufficient moisture on the cotton
pad. Add more lotion or gel.
Why can’t I see any dirt on
the cotton pad?
Dirt is removed even though it may not be visible on the cotton.
The amount of visible dirt on the cotton can vary among
individuals.
Can I use it over a facial
mask?
It can be used over a facial mask too (except in CLEAN Mode).
We recommend using it this way in NEB mode
Troubleshooting
 Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes
throughout the UK and EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.

25 26
Rated Power Supply
Power Consumption
Battery
Charging time
Outer Dimensions
Weight
Materials
Country of origin
Accessories
Recommended Environmental
Temperature
Water resistance class:
DC9V 2.0A
Approx. 18 W
Lithium-ion battery
Approx. 3 hours (May vary depending on the charging environment.)
Main unit (with cotton stopper): approx. W52 x D62 x H203 (mm)
Main unit (with cotton stopper): approx. 293 g
Main unit: ABS resin Indicator panel: Polycarbonate and acrylic resin
Electrode head: PET resin and stainless steel
Main unit’s metallic parts: ABS resin (indium vapor deposition)
Japan
Cotton stopper, AC adapter
15° C〜30° C
JIS-compliant IPX4 class protection
 Product Specifications
<Removing the Battery>
Screw
Connector
Cable
Rubber plug
① Remove the outer cover using a flat-tipped
object.
* It is fixed with strongly adhesive tape
② Remove the 6 rubber stoppers and screws on
the inner cover.
③ Remove the inner cover and disconnect the
battery cable from the connector.
④ Remove the battery using a flat object like a
ruler.
* It is fixed with strongly adhesive tape
Refer to figures ① to ④ below to remove the battery.
Pay attention not to damage the battery
Inner cover
Outer cover
Do not cut the cable.
Battery
Operation Steps
This figure is intended to be used for disposing of the product, not repairing it.
CAUTION: Disassembling the device by yourself may cause a failure.
 Warranty
If you have purchased from www.global.ya-man.com,
Warranty: Please register your device at https://global.ya-man.com/apps/warranty/registrants/new
Contact: inquiries to [email protected]
If you have purchased from local distributor,
Warranty: Please contact your local distributor
 User’s manual (WEB)
User's manual is also available at following address:
https://www.ya-man.co.jp/en/support/documents/