YAMAN M30 User manual

23
M30
User’s Manual
Home-care Beauty Device
Photo PLUS Prestige Pro
M30-1-001E
Table of Contents
Safety Precautions • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1
Use in Foreign Countries • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6
Names of Components • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7
Before Use• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8
How to Use • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 13
After Treatment • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 17
Troubleshooting • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 18
After-sales Service • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 21
Product Specifications• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 22
Thank you for purchasing this YA-MAN product.
Please read this User’s Manual carefully for information on how to use the device properly and
safely.
After reading the contents hereof, be sure to keep this User’s Manual in an accessible location.
Be sure to include this User’s Manual if you are transferring ownership of the device to another
person.

1 2
WARNING
The following individuals should not use the device:
Prohibition
Failure to comply may cause skin
problems or physical ailments.
Do not use the device for a long
time over areas where the skin is
thin or areas above bones.
Failure to comply may cause burns or
low temperature injuries.
Do not use continuously on the
same area except in COOL Mode.
Be sure to move the device across
the skin while it is in use. Do not use
on areas that cannot be reached by
the entire electrode head surface.
Prohibition
Prohibition
Failure to comply may cause physical
injuries.
Do not overuse the device.
For usage time and frequency,
follow the instructions in the User’s
Manual.
Prohibition
Prohibition
• If you have existing or suspected heart disease, or related disorders
• Infants or if you are unable to express your intentions on your own
• If you are unable to sense temperature or stimulation
• If you have an autoimmune disease
• If you have an acute disease • If you have an infectious disease • If you have a malignant tumor
• If you have a febrile disease • If you have high blood pressure or a blood disease
• If you have a fever
• If you have sensory impairment due to severe peripheral circulatory dysfunction (e.g. diabetes)
• If you have a nerve damage • If you have a skin disease or atopic dermatitis
• If you are a hospital outpatient and are taking medication
• If you have a pre-existing skin condition, such as an allergic constitution or contact dermatitis,
or if you have a concern about your skin when using this device
Consult a physician prior to use under the following conditions:
Failure to comply may cause injuries or
skin problems.
Before use, check to make sure the
electrode and treatment head are
not cracked, deformed or broken.
Do not use the device if they are
damaged or malfunctioning.
Failure to comply may cause accidents or other problems.
Do not use in the following cases or on the following areas.
• If your skin is damaged, experiencing a rash, inflammation or other abnormalities
• If you are under the influence of alcohol
• Head, anywhere inside the mouth, around the pubic region or any mucous membrane
• Eyeballs • Upper eyelids (except in COOL Mode)
• Lower eyelids, outer corner of the eye (except in EYE Mode and COOL Mode) • Throat
• Bulging moles • Viral warts • Areas where you have broken a bone
• Areas of internal bleeding, swelling or scabbing after cosmetic medical procedures
* Avoid using the device for 2 weeks after cosmetic medical procedures. After this period, consult with a physician
and only use the device if the physician confirms there is no problem.
(e.g. Hyaluronic acid injections, silicone injections, Botox, thread lifts, double eyelid surgery, HIFU, etc.)
• Areas where metal was implanted by surgery (reconstructive surgery, plastic surgery, cosmetic
surgery)
Failure to comply may cause accidents or other problems.
Safety Precautions
• Read these Safety Precautions carefully before using the device in order to use it correctly.
• Use the device sensibly in accordance with the prescribed steps.
• Immediately discontinue use and arrange to have the device repaired if any abnormality occurs.
• Do not use the device while it is in a defective state, as doing so could cause physical harm to the user.
• The precautions listed in the User’s Manual are very important. For your safety, please follow them
carefully.
• Precautions are classified as DANGER, WARNING, or ATTENTION in order to clearly specify the level of
danger and possible injury or damage that may occur if the device is misused.
Classifications of Precautions
Symbols
* ’Property damage’ refers to damage affecting dwellings, household belongings or
domestic animals and pets.
WARNING Improper use of this device may pose a risk of death or serious injury.
DANGER Improper use of this device poses a severe and likely risk of death or
serious injury.
ATTENTION
Improper use of this device may cause an injury or property damage*.
This symbol shows you what you must not do.
This symbol shows you what you must do.
This symbol shows you what you must be careful with.
DANGER
The following individuals should not use the device:
Use of the device could cause electronic medical devices to malfunction.
Do not use the device in conjunction with any medical electronic equipment, including:
• pacemakers or other implanted electronic medical devices,
• artificial heart-lung machines or other electronic life-support medical devices
• electrocardiographs or other worn electronic medical devices.
Prohibition
Safety Precautions
Safety Precautions

3 4
Contact your local distributor and
use the dedicated power cord.
Failure to comply may lead to a fire
or an electric shock.
Failure to comply may cause a fire,
an electric shock, or other injuries.
Contact your local distributor for
advice on repairing the device.
Failure to comply may cause an
electric shock, short circuit, fire or
failure of the device.
User
restrictions
Do not use the device if the AC
adapter is damaged.
Overloading of
an electric
circuit is
prohibited
Prohibition
Prohibition
Failure to comply may cause a fire
or other accidents.
Do not leave the device
unattended while it is turned on.
Prohibition
Failure to comply may cause an
electric shock, short circuit or fire.
Always use the dedicated AC
adapter.
Prohibition
Prohibition
• In bathrooms or near bathtubs, showers, washbasins or other containers filled with water
• A dusty location, a location where there is exposure to direct sunlight or outdoors
• A slope or a location where there are vibrations or shocks
• A location where there are strong radio waves or magnetism
• Near a flammable substance (such as alcohol, thinner, benzene, nail polish remover or
spray).
• A location where there is exposure to oil smoke or steam
• A location that may become hot, such as near a heating device (e.g. a heater)
• A location with drastic temperature changes (e.g. near an air conditioner or heater)
Failure to comply may cause a fire, electric shocks, accidents, malfunctioning, falls or
injuries.
Do not use, store or charge the device in the following locations:
Failure to comply may cause an
electric shock or a fire due to a short
circuit. Be sure to turn off the power
before pulling out the plug.
Do not pull out a plug from a
power outlet or pull out the plug
from the device during use.
Failure to comply may cause
accidents or injuries.
Keep the device and AC adapter
away from children and do not
allow them to use it alone. Do not
allow children to play with the
device.
User
restrictions Failure to comply may cause
accidents or injuries.
Children should obtain the
consent of their guardians before
using the device and then use it
under the supervision of a
guardian or a specialist.
Failure to comply may cause the
cable to break, resulting in a fire or
an electric shock. Straighten out
any twist in the cord before storing.
Do not damage, modify,
bundle, twist or otherwise apply
undue force to the AC adapter.
Non-intended
uses are
prohibited
Failure to comply may cause a
failure of the device or an injury.
Do not use the device for any
purpose or areas other than
those stated in the User’s
Manual.
Use of a
damaged
cable or plug
is prohibited
Do not disassemble, attempt to
repair, or modify this device in
any way.
Disassembly
is prohibited
Failure to comply may cause a fire,
electric shock or other accidents.
Be sure to use in an operating
voltage range between
100~240 volts. Make sure that
the plug is fully inserted into the
power outlet.
Must Comply
Failure to comply may cause an
electric shock, short circuit, fire or
failure of the device.
Do not exceed the rated capacity
of a power outlet or wiring
accessory (do not connecting too
many plugs in one outlet).
In the unlikely event that an
abnormality occurs, immediately
unplug the AC adapter.
Do not use the device if smoke,
abnormal noises or an odor is
detected, or if it is otherwise
operating in an abnormal state.
Disconnecting
the AC adapter
If the device is dropped or
damaged, turn off the power
immediately, pull out the plug,
and request for a
repair/inspection.
Must Comply
When disconnecting the plug
from a power outlet, pull it out by
grasping its head instead of the
cord (do not touch the metal
parts). Do not insert or
disconnect the plug with wet or
damp hands.
Removing
the plug
Failure to comply may cause the
device to catch a fire or may lead to
accidents.
After using the device and when
cleaning it, be sure to turn off the
power and remove the plug from
the wall socket.
Removing
the plug
Failure to comply may lead to a fire
or an electric shock.
If you feel an earthquake, see
lightning, or hear thunder, turn off
the power and unplug the device.
Removing
the plug
WARNING WARNING
Prohibition against
use when an
abnormal odor
or excess heat
is detected
Failure to comply may cause an
electric shock, a short circuit or a
fire.
Do not use the AC adapter in the
bathroom or areas where there is
water. Do not wash or immerse
the main unit or the AC adapter
in water.
Exposure
to water
is prohibited
Failure to comply may cause the
device to become damaged or
catch a fire.
If any problem occurs during use,
including the presence of an
abnormal odor or excess heat,
stop using the device.
Careless or
reckless use
is prohibited
Failure to comply may cause an
electric shock, short circuit, fire or
failure of the device. Contact your
local distributor for advice on
repairing the device.
Do not use if the AC adapter is
damaged or the wall socket is too
loose.
Safety Precautions
Safety Precautions

5 6
WARNING
ATTENTION
Must Comply
Must Comply
Must Comply
Prohibition
Prohibition
Pressing the device stronger than
necessary or using it intensively on a
single area may damage the skin.
Do not press the device strongly or
use it intensively on a single area.
Failure to comply may cause
accidents or injuries.
Do not use while driving.
Prohibition
Failure to comply may cause the
electrodes to stick to the skin and
damage the skin.
Do not use at a temperature below
the specified ambient temperature.
Prohibition
Failure to comply may cause
damages to your eyes or skin.
Do not look directly into the LED
light. When using the LED light to
treat upper eyelids, lower eyelids,
and outer corner of the eye, be
sure to close your eyes and keep
an electrode head at least 5 cm
away from the skin.
You may feel strong irritation or
discomfort by EMS on your cheeks
or chin. If you feel strong discomfort,
consult a physician.
If you are currently undergoing
dental treatment or have teeth
fillings, choose a lower intensity
level and apply the device on a
different area,
Failure to comply may lead to
accidents.
If a power failure occurs, turn off
the power immediately and unplug
the device from the power outlet.
Make only gradual adjustments to
the intensity level. Failure to comply
may cause accidents or injuries.
Use only Level 1 upon the first use
and until you are accustomed to
use. Even if you do not feel any
stimulation, make only small
adjustments to the intensity level.
Use the device at an intensity level
that suits you.
Failure to comply may lead to
accidents due to malfunctions.
Do not allow the device to come
into contact with another beauty
device or electronic appliance while
the power is on. Do not use with
other electronic products (electric
blankets/bed sheets, heated tables,
etc.) at the same time.
Prohibition
If the mode is used for continuous
treatments, an electrode head of the
device will not become fully cool.
Have an interval of at least 30
minutes between treatments.
Do not use COOL Mode
continuously.
Stop using the device immediately if
the treatment does not agree with
your skin. If symptoms persist the
following day and beyond, consult a
physician.
Check carefully that your skin is
not showing any abnormality
during the treatment. Stop using
the device immediately if you start
to feel pain, fatigue or if you see
any skin reaction during use.
Do not use the device
continuously for an overly long
period, such as for a commercial
use.
Must Comply
When using on the same area
again, be sure to leave an interval of
24 or more hours between
treatments. Excessive use may
damage the skin. The above
recommendations are guidelines
only; please observe your skin
condition and use the device
accordingly.
Avoid using the device on the same
area for longer than 14 minutes.
Prohibition
Removing
the plug
Failure to comply may cause a fire, electric shock or failure of the device.
Use at AC100~240V only to avoid a potential fire or electrical shock hazard.
Must Comply
Failure to comply may cause a generation of heat, fire or malfunction of the device.
Be sure to check the plug configuration and the voltage of the power outlet before use.
Combustion
warning
The plug configuration and voltage may vary depending on the region and the type of accommodation.
Always be sure to check for compatibility before using the device.
For information about plug adapters, consult a travel agency or a consumer electronics retailer.
Use in Foreign Countries
Use in Foreign Countries
Safety Precautions

7 8
Names of Components
Main Unit
• Connect the AC adapter to the adapter plug
insertion port on the main unit and the wall socket,
press and hold the POWER button to turn the device
on (the device will be in Standby Mode).
• Briefly press the button for the mode you wish to
start.
• For CLEAN and NEO DYHP Modes, there are 5
levels from which you can select.
• For EYE Mode, there are 3 levels from which you can
select.
• There is no treatment level selection available for
COOL Mode.
• For vibrations, you can select on/off and vibration
patterns using the Vibration (VIB) button.
How to operate/How to read the display
Indicator and Buttons
Before Use
Before Use
Features/Names of Components
Cotton Stopper
(Silver Ring)
AC Adapter
* The design and specifications of the device and accessories are subject to change for improvements without
prior notice.
* The cotton stopper is attached to the electrode head
when purchased.
* Use this stopper to fix cotton pad to the electrode head.
Level Indicator
EYE Mode Electrodes
Electrode Head
CLEAN Button / Level Button
Level Indicator
(5 levels)
NEO DYHP/EYE Button / Level Button
COOL/POWER Button
Vibration (VIB) Button
Vibration (VIB) button
Adapter Plug Insertion Port
LED Lamps
After switching
to EYE Mode
<Front>
<Rear>
[Accessories]
There are 3 vibration patterns which you can select.
Please select the vibration pattern you prefer.
VIB 1 ⇒VIB 2 ⇒VIB 3 ⇒OFF ⇒VIB 1...

9 10
• Be sure to move the device on your skin while using
• Use only Level 1 upon the first use and until you are accustomed to use.
Before Use
Before Use
Modes
Features Functions Recommended Skin Lotion Operating Time Level
Frequency
Standby
Level Indicator LED Lamps
COOL button lights up
* Only the central electrode
head has cooling functions
COOL
Mode Button Display
N/A Approx. 3 minutes 3 levels 5 times a weekYour regular eye-treatment serum*1
NEO DYHP button flashing rapidly
When rotating the electrode head 180°
1 - 3 lamps
EYE
Improves the elasticity of
the skin around the eyes by
applying weak
micro-currents.
• RF
• Micro-currents
• Vibrations (ON/OFF)
• COOL
• LED (Blue)
• Vibrations (ON/OFF)
(except in COOL Mode).
NEO DYHP button flashing
EYE Standby
When rotating the electrode head 180°
• Use of a cotton pad in NEO DYHP Mode is optional.
• The device and electrode head may become hot after using the COOL Mode.
Do not use COOL Mode continuously. Allow the device to rest (power-off status) for at least half an hour
after use.
*1. If using your regular skin care
products, be sure that they are
water soluble. Do not use oil-based
or scrubbing skin care products.
Failure to comply may cause
malfunctions or skin problems.
N/A
N/A Approx. 3 minutes
Everyday use
is possible
Apply directly on the skin.
Blue LED turns on
Cooling treatment and
light (blue) improve skin
elasticity and skin texture.
1 - 5 lamps
Approx. 5 minutes 5 levels 2 to 3 times a week
NEO DYHP button lights up
Orange and
Red LED turns on
RF Booster Pad*2
Clear Deep Moisturizer
NEO DYHP
• RF
• NEO DYHP
• LED (Orange/Red)
• Vibrations (ON/OFF)
• RF
• EMS (high-frequency
waves)
• Ion Cleansing
• LED (Red)
• Vibrations (ON/OFF)
(If moisture is insufficient, add
the skin lotion remaining in the
pouch.)
Helps beauty ingredients to
penetrate to the stratum
corneum and moisturizes
your skin.
(or cotton pad with your regular
skin lotion*1)
Approx. 3 minutes 5 levels 2 to 3 times a week
RF Booster Pad*2
Pore Refining Deep Cleansing
CLEAN button lights up
Red LED turns on
1 - 5 lamps
CLEAN
Tones your skin and absorbs
dirt that cannot be removed
through normal face
washing.
3 buttons flashing
LED Lamps
Level Indicator
Button Display

11 12
Before Use
Before Use
There are 5 levels for CLEAN and NEO DYHP Modes, and 3 levels for EYE Mode.
Each time the CLEAN or NEO DYHP button is pressed, the level switches as shown in the below picture.
* There is no level selection available for COOL Mode.
* Use only Level 1 upon the first use and until you are accustomed to use.
Level Indicator
One short beep will sound to indicate the half-way point in the operation time.
Refer to pages 9-10 for operation times in each mode.
Level 1 Level 2 Level 3 Level 4 Level 5
Timer
• This mode cares for the skin around the eyes using two electrodes on the electrode head.
• Rotate the electrode head 180° to switch between EYE Mode and Standby Mode.
The electrode head only rotates in the direction of the arrow shown in the figure
on the right.
• The device cannot be operated in Eye Mode if the electrode head is not rotated 180°.
In addition, the device cannot be used in other modes while the electrode head
is rotated.
How to Use EYE Mode
When treatment on a certain mode is completed, two short beeps sound and the device switches to Standby
Mode (the state in which functioning is suspended). Refer to pages 9-10 for operation times in each mode.
Briefly press the Mode button again to start the selected mode.
Standby Mode
EYE Mode Electrodes
* *Rotates only as far
as 180°.
CLEAN/NEO DYHP Mode
EYE Mode 2Apply skin-care product (gel or lotion) or water on your arm.
Use the device for approx. 5 minutes in NEO DYHP Mode.
• Do not wet or rub the pre-testing area.
Pre-testing on Skin
* When using the device or a cosmetic product for the first time, always test for compatibility.
1Clean your skin.
• Wash the inside of your wrist with soap, then wiping it dry with a towel.
If you experience any skin abnormality (redness or burning sensation) at the pre-testing
area within 24 hours, stop using the device.
ATTENTION
• Be sure to perform a pre-test in order to prevent skin problems from occurring.
• If a rash, reddening, itchiness, stinging sensation or other abnormalities occur at the
pre-testing area, immediately stop the pre-test and wash the area.
• Check carefully to make sure there is no skin abnormality before using the device. Stop
using the device immediately if the treatment does not agree with your skin.

13 14
1
Remove makeup and gently cleanse your face.
• Remove oil and dirt from your skin so that it is in a clean condition prior to treatment.
* COOL Mode can be used over makeup.
3
Connect the AC adapter, press and hold the POWER button. Press the
mode button and select a mode and intensity level.
• First, briefly press the button of the mode you wish to use to start. Then press the same button again
briefly to select the level.
• Start using the device in EYE Mode only after rotating the electrode head.
* There is no treatment level selection available for COOL Mode.
* Use only Level 1 upon the first use and until you are accustomed to use.
2
Attach a cotton pad if necessary and apply skin lotion onto it.
Treatment Method
5
Press and hold the POWER button to turn the power off. Disconnect the
AC adapter from the main unit and the wall outlet.
After treatment, condition your skin as necessary.
• Please apply skin cream as appropriate.
* Clean the main unit after each use (page 17).
6
4
Gently apply the treatment head to your skin and move the head over the
area being treated. Refer to pages 15 and 16 for more details.
• When operation in each mode is completed, the device will switch to Standby Mode. To start the next
mode, press the relevant mode button briefly.
* During use, make sure the electrode head is closely touching the skin.
* If you wish to stop the mode you are using half-way through the operation, press and hold the POWER
button.
Remove all metal accessories (watches, necklaces, rings, earrings, etc.) when using the device. Failure
to comply may cause accidents or injuries.
Please reapply skin-care products or water during treatment to ensure that there is always some liquid
between the electrode head and the skin. If there is an insufficient amount of skin-care products or
water, the stimulation will weaken, causing skin problems.
Please carefully clean the parts of the device that come into contact with the skin every time you use it
and keep the device clean at all times. Failure to comply may cause skin problems.
If you feel an unpleasant tingling on your skin, reduce the intensity level or move to another area.
You could also moisten the skin with water, lotion, or gel before using the device.
Failure to comply may cause skin damage.
How to Use
How to Use
How to attach cotton pad to the electrode head
1Remove the cotton stopper from the
electrode head.
2Place a piece of cotton pad on top of the electrode head
and press the cotton stopper down over the cotton pad.
* If the cotton stopper does not fit properly on the electrode head, please use a larger and thinner
piece of cotton pad. Because thick cotton pads are difficult to fix in place, split them in half before
use.
* If the cotton pad is too thick, the thermal action of RF treatment may be adversely affected and
you will feel less heat.
3Apply your regular skin lotion or gel onto the cotton pad.
* Make sure the skin lotion or gel coats the entire surface of the electrode head.
* If using a waterly (low-viscosity) skin lotion, the feeling of warmth may decrease.
Recommended skin lotions: RF Booster Pad or high-viscosity skin lotions.
* If the cotton pad becomes dry, add more skin-care product. Cotton pads may easily come off
from the device when they are dry.
How to Use
How to Use (General Instructions)
Precautions
Be sure to move the device on your skin while using. Using the device continuously on the same area
may cause burns or other injuries (except in COOL Mode).
The warmth of the RF changes depending on the type of skin-care product used and the skin’s
condition at the time of treatment.
Do not use this device around the eyes unless it is in EYE Mode or COOL Mode.
* The LED light can be used around the eyes and eyelids. Close your eyes and hold the device at least
5 cm away from the skin.
Do not look directly into the LED light.
The recommended ambient temperature is 15° C to 30°C.
Make sure to remove makeup before using the device on your face. If you use the device over makeup,
the foundation may cause dark staining of the skin.

15 16
Rotate the electrode head 180° so that the EYE Mode electrodes are at the top.
Make sure that both electrodes are touching the skin, press the electrode heads down repeatedly from
the inner to the outer corner of the eye as if stamping the skin
(Press →Release →Move electrode heads).
Press the electrodes down on the skin for approx. 3 seconds.
* Do not use the device on the eyelids.
* Be sure not to press down continuously on the skin for longer than 3 seconds.
How to Use
How to Use
How to use the device on your skin
<CLEAN Mode>
Move the electrode head over the skin in the direction of the arrows shown below.
The LED light can be used to treat the upper eyelids, lower eyelids, and outer corner of the eye.
Areas you should not treat
Areas you should not treat
Areas that can only be treated with LED light
* Close your eyes and hold the device at least 5 cm away from the skin.
• Recommended speed for moving the device: approx. 2 cm per second
* If the temperature feels too hot, move the electrode head more quickly.
• One short beep will sound to indicate the half-way point in the operation time.
When you hear the beeps , begin care on the other side of your face.
• Use the device in a position in which the entire surface of the electrode head comes in contact with
your skin.
• Be sure to move the device over the skin while using (except in COOL Mode).
Placing the device continuously on the same area may cause burns or low-temperature injuries.
• Do not use on the upper eyelids (except in COOL Mode), lower eyelids, or outer corner of the eye
(except in EYE Mode and COOL Mode).
<NEO DYHP Mode>
<EYE Mode>
Move the electrode head over the skin
in the direction of the arrows shown below.
Press and move the device in a circular,
massaging motion as indicated by the arrows.
<COOL Mode>
Press the electrode head repeatedly on your face as if stamping on the skin
(Press →Release →Move electrode head).
* The device can also be used over the lower eyelids and outer corner of the eye. Turn off the vibration function.
* When using the LED light on the upper eyelids, lower eyelids or outer corner of the eye, be sure to close your eyes
and keep the electrode head at least 5 cm away from the skin.
Areas you should not treat
Look in a mirror
while you are using
the device
Areas that can only be treated with LED light
* Close your eyes and hold the device
at least 5 cm away from the skin.
EYE Mode Electrodes

17 18
→ →
→ →
→→
You cannot feel any
vibration. Vibrations are turned off.
Press the Vibration (VIB)
button to switch on the
vibration function.
→ →
EYE Mode does not
function.
The electrode head is not in
the correct position.
EYE Mode will not function
unless the EYE Mode
electrodes are properly rotated
180°. Rotate the electrodes so
that they are in the correct
position (page 11).
→→
The EYE Mode electrodes
are not touching the skin.
Please make sure both of the
two EYE Mode electrodes
are touching the skin at the
same time (see page 16).
→ →
COOL Mode is not very cool.
The device is being used in
an environment with a
temperature exceeding the
recommended range.
Try using in an environment
with the temperature
between 15°C and 30°C.
→ →
COOL Mode was used
continuously.
Turn off the device and wait
at least for 30 minutes
before restarting to use.
→ →
The outside of the electrode
head will not cool down.
Only the inner electrode
head becomes cool.
→ →
Troubleshooting
After Treatment
Checklist for Possible Problems
Problems Possible Causes Solutions
The device does not turn on.
Turn on the power by
connecting the AC adapter.
The AC adapter is not
plugged into the wall socket.
Plug adapter into the device.
The adapter is not plugged
into the device.
Troubleshooting
To keep the product clean, please be sure to clean it after each use.
1Disconnect the AC adapter from the main unit and the wall outlet.
2To clean the device and electrode head, wipe them with a damp and
well-wrung cloth to remove any dirt. Wash the cotton stopper with water
after removing it from the main unit.
• Refrain from using an alkali cleaning agent, alcohol, thinner, benzene, nail polish remover or any
other solvents.
• Do not leave the device with lotion or gel on it.
3Wipe the entire device with a dry cloth and store it after removing all
moisture.
After Treatment
The device is too warm. The device was used
continuously.
Turn off the device and wait
at least for 1 hour before
restarting to use.
Storage
If you will not be using it for an extended period, clean the device before storing it.
When the device is not in use, disconnect the AC adapter from the main unit and wall outlet.
Avoid storing the device near a heater or in a bathroom or other high-temperature/high-humidity
locations. Also, avoid locations where there is an exposure to direct sunlight or unstable.
Keep the device out of the reach of children.
Maintenance and Inspections
If you will not use the device for an extended period, be sure to inspect it carefully and check that the device
works properly and safely before restarting use.
If the device is malfunctioning, go to ‘Checklist for Possible Problems’ (pages 18-19) and attempt to identify
the problem before arranging to have the device repaired. If the problem persists, contact your local
distributor with a proof of purchase.
If the device malfunctions or appears damaged, please contact your local distributor.
How To Clean

19 20
QA
I have a tingly sensation
on my skin.
This tingly sensation is caused by electrical stimulation from
Ion/EMS/NEO DYHP.
It is possible to adjust the level using the Level button. Use the
device at a strength that feels comfortable for you.
Use only Level 1 upon the first use and until you are accustomed
to use.
Why do I not feel warmth of
RF when using CLEAN,
NEO DYHP or EYE Modes?
Move the electrode head more slowly or press harder against the
skin surface. It is also possible that the moisture absorbed in the
cotton is insufficient. Add more lotion or gel.
Why can’t I see any dirt
on the cotton pad?
Dirt is removed even though it may not be visible on the cotton.
The amount of visible dirt on the cotton can vary among
individuals.
The electrode head does not
warm up when I use RF Mode.
The RF does not warm the electrode head. Rather, it uses the
power of electricity to warm your skin.
What is the recommended
frequency and duration of use?
Recommended frequency of use:
2 to 3 times a week for Clean/NEO DYHP Mode. 5 times a week
for EYE Mode. The device can be used daily for COOL Mode.
Recommended duration of use:
CLEAN, EYE, COOL Modes: approx. 3 minutes. NEO DYHP
Mode: approx. 5 minutes. Excessive use may damage the skin.
The above recommendations are guidelines only; please observe
your skin condition and use the device accordingly.
Can I use it over a facial
mask?
It can be used over a facial mask too (except in CLEAN Mode).
→ →
→ →
The level setting is too low. Increase the level with Level
button.
→ →
The skin lacks moisture or
is dry.
Moisturize your skin with
lotion or gel before use.
→ →
You cannot feel the EMS or
it feels too weak
The treatment temperature
is too high (except in COOL
Mode).
You cannot feel RF warmth.
The electrode head is not
moved along the muscles.
Apply the electrode head
along muscles (page 15).
→ →
You are using the device
without moving the electrode
head.
Be sure to move the electrode
head over your skin when
using the device, except in
COOL Mode.
→ →
You are moving the device
too slowly on the skin.
Move the device a little
quicker.
→ →
Standby Mode has been
activated (page 11)
Press the relevant mode
button to start the mode.
→ →
The skin lacks moisture or is
dry.
Moisturize your skin with
lotion or gel before use.
→ →
You are moving the device
too quickly.
Please move the device a
little slower.
→ →
It may feel very hot
depending on the skin-care
product used or the
presence/absence of a cotton
pad.
Use the device without a
cotton pad.
→
→
Change the skin-care
product used.
→
Troubleshooting
Frequently Asked Questions
How much lotion or gel
should I use each time?
This device is designed to achieve better results with sufficient use
of lotions and/or gel.
As a general guide, when using cotton pads, be sure that the
entire electrode head is moistened with face lotion.
Use about two pearl-sized drops of gel.
We recommend adding more lotion or gel if you feel there is not
enough.
Problems Possible Causes Solutions
Troubleshooting
EMS causes uncomfortable
tingling or pain.
The level setting is too high. Lower the level using the
Level button.
The entire surface of the
electrode head is not
touching the skin.
Use a mirror to check that
the entire surface of the
electrode head is touching
the skin.

21 22
Product Specifications
Disposing of the device
• Follow your local government rules for proper disposal of this product.
Contacts for overseas customers
Please contact your local distributor or visit YA-MAN Global websites (https://www.ya-man.com/en/).
After-sales Service
After-sales Service
Rated Power Supply
Power Consumption
Outer Dimensions
Weight
Materials
Country of manufacture
Accessories
Recommended
Environmental
Temperature
DC12V 5.0A
Approx. 20 W
Main unit (with a cotton stopper): Approx. W 50 x D 65 x H 185 (mm)
Main unit (with a cotton stopper): Approx. 230 g
Main unit: ABS resin Panel: Polycarbonate
Electrode head: PET resin and stainless steel
Japan
Cotton stopper, AC adapter
15°C to 30°C
Correct Disposal of this product
●This marking indicates that this product should not be disposed with other household wastes throughout
the UK and EU. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.