Yealink CPW90 User manual

www.yealink.com
Quick Start Guide (V1.0)
CP Wireless Expansion Mic
CPW90

1
Packaging Contents
The CPW90 Component Instruction
The following items are included in your package. If you find anything
missing, contact your system administrator.
Charging the CPW90
Mute Button
Built-in Microphone
Battery Indicator
1
2
3
4
Charger Slot
Charger Cradle 0.3m
Micro USB Cable Quick Start Guide
CPW90×2
1
20.3m
Micro USB Cable
1
2
Put the CPW90 on the charger cradle.
Connect the micro USB port on the charger cradle to the USB port on the
CP960 using a 0.3m USB cable.
During charging, the battery LED indicator on the CPW90 illuminates solid
red. When the battery capacity reaches 100%, the battery LED indicator on
the CPW90 will illuminate solid green.

Registering the CPW90 to the CP960 Conference Phone
Note: You can connect up to two CPW90 to a CP960 conference phone.
If the CPW90 has registered with the CP960 conference phone, you can skip
this chapter.
If the CPW90 is not registered with the CP960 conference phone, you
should register the CPW90 to the CP960 conference phone. The CPW90
works as the audio input device of the CP960 conference phone.
To register the CPW90 to the CP960 conference phone:
1. Do the following on the CP960 conference phone:
Tap ->Wireless Microphone.
Tap to search for a CPW90.
2. Turn on the CPW90.
The CPW90 enters the registration mode automatically. And the mute
indicator LED on the CPW90 fast flashes yellow.
The CPW90 registers with the CP960 conference phone automatically.
If the registration is successful, the mute indicator LED on the CPW90
goes out and the touch screen of CP960 conference phone prompts the
CPW90 information: battery, work time and standby time.
2
Note: If it is the first time you use the CPW90, you need to fully charge the
CPW90 for normal use.
If the CPW90 is not in use, we recommend you to charge the CPW90
even when the battery is full.
There are two indicators on the CPW90. The indicators display the CPW90
work status.
LED Instruction
When you charge the CPW90, the CPW90 will start up automatically .
If you do not charge the CPW90, long tap
the mute button on the CPW90
for 3 seconds
to turn on the CPW90 .

3
Off
Fast flashing yellow
Slowly flashing yellow
The CPW90 is in the registration mode.
The CPW90 has registered with the phone,
but the CPW90 is out of range.
The CPW90 has registered with the phone,
but the CP960 is turned off.
The CPW90 is in the idle mode.
Mute indicator LED on the CPW90:
The phone is searching for the CPW90 which
has registered with it.
Flashing red and green
alternately
LED Status
Solid red
Solid green
Slowly flashing red The phone is receiving an incoming call.
Description
The phone is muted.
The phone enters the pre-dialing screen.
The phone is in a call and unmuted.
Battery indicator LED on the CPW90:
The CPW90 is turned on.
Solid green for one second
and then off
Solid green
Fast flashing red 3 times
and then off
Solid red The CPW90 is being charged.
The CPW90 is fully charged.
The battery capacity is too low to turn on
the CPW90.
Solid green for 3 seconds
and then off
LED Status Description
The CPW90 is in the idle mode.

When the CPW90 works as an audio input device of the CP960 conference
phone and the CP960 conference phone is in a call, you can tap
the mute
button on the CPW90
to mute or unmute the CPW90.
Muting or Unmuting the CPW90
4
Placing the CPW90
If you tap the mute button, the battery
indicator LED on the CPW90 is still off, it
means the CPW90 is turned off.
Off
Slowly flashing red The battery capacity is less than 10%.
LED Status Description
r=3m
CPW90
The CPW90 is a wireless expansion mic which can work as the audio input
device of the CP960 conference phone. It supports 360-degree audio
pickup at a radius of up to 3 meters. The CPW90 has a rubber pad on its
base to prevent it from sliding. You can place the CPW90 on a conference
table.
Do the following to ensure optimal voice quality:
The CPW90 should be less than 20 meters distant from the CP960
conference phone, and is not disturbed by obstacles.
Place the CPW90 on a stable surface and keep it away from obstacles so
that it can effectively pick up sounds.

1. How to turn off the CPW90?
You should long tap
the mute button on the CPW90, until the battery
indicator LED on the CPW90 illuminates solid red for 3 seconds and then
goes out.
Frequently Asked Questions
5
2. How to find the CPW90 which has registered with the CP960
conference phone?
1) Tap ->Wireless Microphone.
2) Select the desired mic, and then tap Find.
The mute indicator LED on the CPW90 flashes red and green
alternately.
3. How to register the CPW90 to another CP960 conference phone?
The CPW90 can only be registered to one CP960 conference phone, if
you want to register the CPW90 to another CP960 conference phone, the
CPW90 will deregister from the previous CP960 conference phone
automatically.
To register the CPW90 to another CP960 conference phone:
1) Do the following on the CP960 conference phone:
Tap ->Wireless Microphone.
Tap to search for a CPW90.
2) Charge the CPW90.
3) Long tap
the mute button on the CPW90 for 5 seconds.
The CPW90 enters the registration mode. And the mute indicator LED
on the CPW90 fast flashes yellow.
The CPW90 registers with the CP960 conference phone automatically.
4. What is the idle mode?
When the CPW90 registers with the CP960 conference phone
successfully, the CPW90 enters the idle mode. You can tap
the mute
button on the CPW90
, the battery indicator LED on the CPW90
illuminates solid green for 3 seconds and then goes out.
5. How to deregister the CPW90?
1) Tap ->Wireless Microphone.
2) Select the desired mic, and then tap Detail.
3) Tap Unbind to deregister the CPW90.

About Yealink
Yealink (Stock Code: 300628) is a global leading unified communication (UC) terminal solution provider
that primarily offers video conferencing systems and voice communication solutions. Founded in 2001,
Yealink leverages its independent research and development and innovation to pursue its core mission:
“Easy collaboration, high productivity.” The company’s high-quality UC terminal solutions enhance the
work efficiency and competitive advantages of its customers in over 100 countries. Yealink is the world’s
second-largest SIP phone provider and is number one in the China market.
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com
Addr: 309, 3th Floor, No.16, Yun Ding North Road, Huli
District, Xiamen City, Fujian, P.R. China
Copyright
©2017 YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD .All rights reserved.
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and
more. For better service, we sincerely recommend you to use Yealink Ticketing system
(https://ticket.yealink.com) to submit all your technical issues.
  