Yeastar Technology NeoGate TA410 User manual

Installation Guide
1.0
December 10, 2019
Yeastar TA410/810 FXO VoIP Gateway

Contents
Safety Disclaimers and Installation Warnings....................................................................................................... 3
Packing List............................................................................................................................................................... 4
Hardware Overview................................................................................................................................................... 5
TA410 Hardware Overview..................................................................................................................................5
TA810 Hardware Overview..................................................................................................................................6
Connect Yeastar TA Gateway.................................................................................................................................. 8
Install Yeastar TA Gateway (Wall Mount)............................................................................................................... 9

Safety Disclaimers and Installation Warnings
To avoid unexpected accident, personal injury or device damage, read the safety disclaimers and installation
warnings.
Power
•Use only the power adapter provided with the Yeastar TA device.
•Keep the power off during the installation.
•Make sure that the supply voltage matches the specifications indicated on the back panel of the device.
•To avoid the electric accident, do not open or remove the cover of device when it is working as well as off the
power.
•Before cleaning the device, cut off the power supply.
Environment
Install the Yeastar TA device in a location that is clean, free from vibration, electric shock, and temperature/humidity
extremes.
Table 1:
Environment Requirement
Storage Temperature -20 to 65°C, 4 to 149°F
Humidity 10% to 90% (non-condensing)
Operation Temperature 0 to 40°C, 32 to 104°F

Packing List
Upon receiving Yeastar TA 410/810 gateway, you can open the package and check if all the items are supplied as
per packing list.
Note: If there are any problems, contact your provider.
Table 2: TA410/810 packing list
Item Unit QTY Description
TA410/TA810 PC 1 Device unit.
RJ45 Ethernet cable PC 1 -
Warranty card PC 1 With serial number printed for repair & return.
Stand PC 1 -
Power adapter PC 1 For the input of power.
Quick installation guide PC 1 -

Hardware Overview
TA410 Hardware Overview
TA410 front panel
Table 3:
No. Feature Description
①Power Indicator Indicates the power status.
②Run Indicator Indicates the system status.
•Blinking: The system is working properly.
•Not Blinking/Off: The system goes wrong.
③LAN Status Indicator Indicates the LAN status.
④WAN Status Indicator Reserved.
⑤FXO Ports Status Indicator Indicates the FXO ports status.
•Solid red: Public Telephone Network (PSTN)
is connected to the port.
•Red light blinking: No Public Telephone
Network (PSTN) is connected to the port.
Note: The FXO indicators 5-8 are
invalid.

TA410/810 Installation Guide | 3 - Hardware Overview | 6
TA410 back panel
Table 4:
No. Feature Description
⑥Power inlet For connection to power supply.
⑦Reset button Press and hold for 7 seconds to reset to factory
defaults.
Note: Do NOT press this button for a
long time, or the system would break down.
⑧LAN port For connection to Local Area Network (LAN).
⑨WAN port Reserved.
⑩RJ11 FXO Ports For connection to Public Telephone Network
(PSTN).
TA810 Hardware Overview
TA810 front panel
Table 5:
No. Feature Description
①Power Indicator Indicates the power status.

TA410/810 Installation Guide | 3 - Hardware Overview | 7
No. Feature Description
②Run Indicator Indicates the system status.
•Blinking: The system is working properly.
•Not Blinking/Off: The system goes wrong.
③LAN Status Indicator Indicates the LAN status.
④WAN Status Indicator Reserved.
⑤FXO Ports Status Indicator Indicates the FXO ports status.
•Solid red: Public Telephone Network (PSTN)
is connected to the port.
•Red light blinking: No Public Telephone
Network (PSTN) is connected to the port.
Note: The FXO indicators 5-8 are
invalid.
TA810 back panel
Table 6:
No. Feature Description
⑥Power inlet For connection to power supply.
⑦Reset button Press and hold for 7 seconds to reset to factory
defaults.
Note: Do NOT press this button for a
long time, or the system would break down.
⑧LAN port For connection to Local Area Network (LAN).
⑨WAN port Reserved.
⑩RJ11 FXO Ports For connection to Public Telephone Network
(PSTN).

Connect Yeastar TA Gateway
Follow the steps to connect Yeastar TA410/810 FXO VoIP gateway.
1. Connect TA gateway to the Internet
LAN port can be connected to router or PBX.
2. Connect TA gateway to PSTN
FXO ports can be connected to PSTN.
3. Power on TA gateway
Connect one end of the power adapter to the gateway’s power port; plug the other end into an electrical outlet.
There's no power switch on TA410/810 gateway.

Install Yeastar TA Gateway (Wall Mount)
Yeastar TA 410/810 gateway can not only be placed on a desk, but also be mounted to the wall, which saves space
on your desk and presents an organized look. Follow the instructions to mount Yeastar TA410/810 gateway to the
wall by stand.
1. Remove the screws on the stand. Screw the clump weight to the stand again as the picture shows.
2. Push the Yeastar TA device into the stand.
3. Fix two screws on the wall, and then you could mount the stand to the wall.

TA410/810 Installation Guide | 5 - Install Yeastar TA Gateway (Wall Mount) | 10