Yeastar Technology NeoGate TA1600 User manual

TA1600/2400/3200 FXS Gateway
User Manual
Version 40.18.0.10
Yeastar Information Technology Co. Ltd.

TA1600/2400/3200 FXS Gateway User Manual
Table of Contents
Introduction ............................................................................................................4
Part I. Configuration Guide ....................................................................................5
1. Login....................................................................................................................5
2. Status ..................................................................................................................6
2.1 System Status................................................................................................. 6
2.1.1 Port Status................................................................................................ 6
2.1.2 Network status.......................................................................................... 7
2.1.3 System Info............................................................................................... 7
2.2 Reports ........................................................................................................... 7
2.2.1 Call Logs .................................................................................................. 7
2.2.2 System Logs............................................................................................. 8
2.2.3 Packet Tool ............................................................................................... 9
3. System...............................................................................................................10
3.1 Network Preferences .................................................................................... 10
3.1.1 LAN Settings........................................................................................... 10
3.1.2 Service ................................................................................................... 11
3.1.3 VLAN Settings ........................................................................................ 11
3.1.4 VPN Settings .......................................................................................... 12
3.1.5 DDNS Settings ....................................................................................... 14
3.1.6 Static Route............................................................................................ 14
3.1.7 SNMP Settings ....................................................................................... 15
3.2 Security Center ............................................................................................. 16
3.2.1 Security Center....................................................................................... 16
3.2.2 Alert settings ........................................................................................... 17
3.2.3 AMI Settings ........................................................................................... 20
3.2.4 Certificates ............................................................................................. 20
3.2.5 Firewall Rules ......................................................................................... 21
3.2.6 IP Blacklist .............................................................................................. 23
3.3 System Preferences...................................................................................... 23
3.3.1 Password settings................................................................................... 24
3.3.2 Date and Time ........................................................................................ 24
3.3.3 Email Settings......................................................................................... 24
3.3.4 Auto Provision Settings........................................................................... 25
3.3.5 Firmware Update .................................................................................... 28
3.3.6 Backup and Restore ............................................................................... 28
3.3.6 Reset and Reboot................................................................................... 29
4. Gateway.............................................................................................................30
4.1 FXS Port List................................................................................................. 30
4.1.1 FXS Port List .......................................................................................... 30
2/60

TA1600/2400/3200 FXS Gateway User Manual
4.1.2 Hunt Group............................................................................................. 36
4.2 VoIP Settings ................................................................................................ 37
4.2.1 VoIP Server Settings............................................................................... 38
4.2.2 Dial Pattern Template ............................................................................. 41
4.2.3 SIP Settings............................................................................................ 41
4.2.4 IAX Settings............................................................................................ 47
4.3 Gateway Settings.......................................................................................... 48
4.3.1 General Preferences............................................................................... 48
4.3.2 Feature Codes........................................................................................ 48
4.3.3 Speed Dial Settings ................................................................................ 51
4.4 Audio Settings............................................................................................... 51
4.4.1 Custom Prompts..................................................................................... 51
4.4.2 Music on Hold Prompts........................................................................... 52
4.4.3 System Prompts Settings........................................................................ 53
4.5 Advanced Settings ........................................................................................ 53
4.5.1 Tone Zone Settings................................................................................. 53
4.5.2 RADIUS Settings .................................................................................... 55
Part II. Basic Operations ......................................................................................57
1. TA FXS Gateway Voice Menu ...................................................................... 57
2. Inter-port Call ............................................................................................... 57
3. Call Hold ...................................................................................................... 58
4. Call Waiting.................................................................................................. 58
5. Call Transfer................................................................................................. 58
7. Direct IP Call ................................................................................................ 59
8. Change TA FXS Gateway’s IP Address Using Analog Phones ..................... 59
3/60

TA1600/2400/3200 FXS Gateway User Manual
Introduction
Yeastar TA1600/2400/3200 FXS Analog VoIP Gateways are cutting-edge products
that connect legacy telephones, fax machines and PBX systems with IP telephony
networks and IP-based PBX systems. Featuring rich functionalities and easy
configuration, Yeastar TA is ideal for small and medium enterprises that wish to
integrate a traditional phone system into IP-based system. Yeastar TA helps them to
preserve previous investment on legacy telephone system and reduce
communication costs significantly with the true benefits of VoIP.
Features
●16/24/32 FXS ports
●Fully compliant with SIP and IAX2
●Dial Pattern of outgoing calls
●Hunt Group
●Configurable VoIP Server templates
●Reliable fax performance with T.38
●3-party Conference
●Inter-port Calling
●Call Hold
●Blind Transfer
●Attended Transfer
●Support RADIUS protocol
For more information, please click:
http://www.yeastar.com/Products.html/Analog-VoIP-Gateways
For more information about the Yeastar TA hardware specification and how to install
the Yeastar TA, please refer to the document below:
http://www.yeastar.com/downloadFile/75
4/60

TA1600/2400/3200 FXS Gateway User Manual
Part I. Configuration Guide
1. Login
The TA FXS Gateway attempts to contact a DHCP server in your network to obtain
valid network settings (e.g., the IP address, subnet mask, default gateway address
and DNS address) by default.
Please enable DHCP Server in your network to obtain the TA FXS Gateway IP
address.
How to check TA FXS Gateway IP address:
1. Pick up the analog phone, then access the voice menu prompt by dialing “***”.
2. Dial "1" to check the IP address.
3. Dial "2" for web access address.
Logging On:
After entering the IP address in the web browser, users will see a log-in screen.
Check the default settings below:
Username: admin
Password: password
In this example, the IP address is 192.168.6.150, the model is TA1600.
Figure 1-1 TA FXS Gateway Login page
5/60

TA1600/2400/3200 FXS Gateway User Manual
2. Status
Click to check the status of TA FXS Gateway, including the system status
and the detailed reports.
2.1 System Status
In this page, we can check the status of the system, including trunk status, network
status and system information.
2.1.1 Port Status
Figure 2-1 FXS Port Status
Table 2-1 Description of FXS Port Status
Up/Down
Up
The FXS module works well.
Down
The FXS module is broken.
Status
OK
Successful registration, trunk is ready for use
Unreachable
The trunk is unreachable.
Request Send
Registering.
Waiting for
authentication
Wrong password or user name.
Failed
Trunk registration failed.
Voice Mail (New/Old)
Showing the number of unread voicemail and old voicemail.
*Only when the FXS port is registered as one of the VoIP Server’s accounts, can
you see the voice mail status.
Hook
On Hook The FXS port is idle.
Off Hook The FXS port is busy.
6/60

TA1600/2400/3200 FXS Gateway User Manual
2.1.2 Network status
In this page, the IP address of LAN port will appear with their status.
Figure 2-2 Network Status
If your VLAN or VPN are configured, you can check the status in this page also.
2.1.3 System Info
In this page, we can check the hardware/firmware version, or the disk usage of TA
FXS Gateway.
Figure 2-3 System Info
2.2 Reports
In this page, we can check the call detailed log, system log, and use the packet tool to
debug the system when needed.
2.2.1 Call Logs
The call log captures all call details, including call time, caller number, callee number,
7/60

TA1600/2400/3200 FXS Gateway User Manual
call type, call duration, etc. An administrator can search and filter call data by call date,
caller/callee, trunk, duration, billing duration, status, or communication type.
Figure 2-4 Call Logs
2.2.2 System Logs
You can download and delete the system logs of TA FXS Gateway.
Figure 2-5 System Logs
•Enable Hardware Log
Save the information of hardware; (up to 4 log files)
•Enable Normal Log
Save the prompt information; (up to 16 log files)
•Enable Web Log
Save the history of web operations (up to 2 log files)
•Enable Debug Log
Save debug information (up to 2 log files)
8/60

TA1600/2400/3200 FXS Gateway User Manual
2.2.3 Packet Tool
This feature is used to capture packets for technician. Integrate packet capture tool
“Wireshark” in TA FXS Gateway.
Users also could specify the destination IP address and port to get the packets.
Figure 2-6 Packet Tool
•IP
Specify the destination IP address to get the packets.
•Port
Specify the destination Port to get the packets.
9/60

TA1600/2400/3200 FXS Gateway User Manual
3. System
Click to access. In this page, we can configure the network settings, security
settings and some system preferences.
3.1 Network Preferences
3.1.1 LAN Settings
Figure 3-1 Static IP Address Mode
Table 3-1 Description of LAN Settings
Items
Description
Hostname
Set the host name for TA FXS Gateway
Static IP Address
Set the TA FXS Gateway’s IP address as a static IP
IP Address
Set the IP Address for TA FXS Gateway. It is recommended that
you configure a static IP address for TA FXS Gateway.
Subnet Mask
Set the subnet mask for TA FXS Gateway
Gateway
Set the gateway for TA FXS Gateway
Primary DNS
Set the primary DNS for TA FXS Gateway.
Secondary DNS
Set the secondary DNS for TA FXS Gateway
IP Address2
Set the second IP Address for TA FXS Gateway
Subnet Mask2
Set the second subnet mask for TA FXS Gateway
Figure 3-2 DHCP Mode
Select DHCP mode to get network automatically from the local network.
10/60

TA1600/2400/3200 FXS Gateway User Manual
Figure 3-3 PPPoE
Fill in user name and password to access the Internet via PPPoE.
3.1.2 Service
The administrator can manage all the access methods on TA FXS Gateway on the
"Service" page.
Figure 3-4 Service Settings
Table 3-2 Description of Service Settings
Items
Description
SSH
By using SSH, you can log in to TA FXS Gateway and run
commands
. It's disabled by default. We don't recommend
enabling it if not needed.
The default port for SSH is 8022;
FTP
FTP access;
The default port is 21.
TFTP TFTP access;
The default port is 23.
HTTP
HTTP web access;
The default port is 80.
HTTPS
HTTPS web access, it is disabled by default, and you can enable
it to get safer web access.
3.1.3 VLAN Settings
A VLAN (Virtual LAN) is a logical local area network (or LAN) that extends beyond a
single traditional LAN to a group of LAN segments, given specific configurations.
11/60

TA1600/2400/3200 FXS Gateway User Manual
Note:
TA FXS Gateway is not the VLAN server, a 3-layer switch is still needed, please
configure the VLAN information there first, then input the details in TA FXS Gateway,
so that the packages via TA FXS Gateway will be added the VLAN label before
sending to that switch.
Figure 3-5 VLAN Settings
Table 3-3 Description of VLAN Settings
Items
Description
NO.1
Click the NO.1 you can edit the first VLAN over LAN
VLAN Number
The VLAN Number is a unique value you assign to each
VLAN on a single device
VLAN IP Address
Set the IP Address for TA FXS Gateway VLAN over LAN.
VLAN Subnet Mask
Set the Subnet Mask for TA FXS Gateway VLAN over LAN.
Default Gateway
Set the Default Gateway for TA FXS Gateway VLAN over LAN
NO.2
Click the NO.2 you can edit the first VLAN over LAN.
VLAN Number The VLAN Number is a unique value you
assign to each
VLAN on a single device.
VLAN IP Address
Set the IP Address for TA FXS Gateway VLAN over LAN.
VLAN Subnet Mask
Set the Subnet Mask for TA FXS Gateway VLAN over LAN.
Default Gateway Set the Default Gateway for TA FXS Gateway
VLAN over
LAN.
3.1.4 VPN Settings
A virtual private network (VPN) is a method of computer networking typically using the
public internet that allows users to privately share information between remote
locations, or between a remote location and a business' home network. A VPN can
provide secure information transport by authenticating users, and encrypting data to
prevent unauthorized persons from reading the information transmitted. The VPN can
be used to send any kind of network traffic securely. TA FXS Gateway supports
12/60

TA1600/2400/3200 FXS Gateway User Manual
OpenVPN.
Figure 3-6 VPN Settings
•Enable VPN
•Import VPN Config
Import configuration file of OpenVPN.
Notes:
1. Don't configure “user” and “group” in the “config” file. You can get the config
package from the OpenVPN provider.
2. TA FXS Gateway works as VPN client mode only.
13/60

TA1600/2400/3200 FXS Gateway User Manual
3.1.5 DDNS Settings
DDNS (Dynamic DNS) is a method / protocol / network service that provides the
capability for a networked device, such as a router or computer system using the
Internet Protocol Suite, to notify a Domain Name System (DNS) name server to
change, in real time, the active DNS configuration of its configured hostnames,
addresses or other information.
Figure 3-7 DDNS Settings
Table 3-4 Description of DDNS Settings
Items
Description
DDNS Server
Select the DDNS server you sign up for service.
User Name
User name the DDNS server provides you.
Password
User account’s password.
Host Name
The host name you have got from the DDNS server
Note: DDNS allows you to access your network using domain names instead of IP
address. The service manages changing IP address and updates your domain
information dynamically. You must sign up for service through dyndns.org,
freedns.afraid.org, www.no-ip.com, www.zoneedit.com.
3.1.6 Static Route
TA FXS Gateway will have more than one Internet connection in some situations but it
has only one default gateway. You will need to set some Static Route for TA FXS
Gateway to force it to go out through different gateway when accessing to different
internet.
The default gateway priority of TA FXS Gateway from high to low is VPN/VLAN LAN
port.
14/60

TA1600/2400/3200 FXS Gateway User Manual
Figure 3-8 Static Route
1) Route Table
The current route rules of TA FXS Gateway.
2) Static Route Rules
You can add new static route rules here.
Table 3-5 Description of Static Route Settings
Items
Description
Destination
The destination network to be accessed to by TA FXS Gateway.
Subnet Mask
Specify the destination network portion.
Gateway Define which gateway TA FXS Gateway
will go through when
accessing the destination network.
Metric
The cost of a route is calculated by using what are called routing
metric. Routing metrics are assigned to routes by routing
protocols to provide measurable statistic which can be used to
judge how useful (how low cost) a route is.
Interface
Define which internet port to go through.
3.1.7 SNMP Settings
Simple Network Management Protocol (SNMP) is an Internet-standard protocol for
managing devices on IP networks. TA FXS gateway supports three versions: V1, V2C
and V3.
15/60

TA1600/2400/3200 FXS Gateway User Manual
Figure 3-9 SNMP Settings
3.2 Security Center
3.2.1 Security Center
You can check TA FXS Gateway security configuration in “Security Center” page. And
also, you can enter the relevant security settings page rapidly.
16/60

TA1600/2400/3200 FXS Gateway User Manual
Firewall:
Figure 3-10 Firewall
In the “Firewall” tab, you can check firewall configuration and alert settings. You can
enter the configuration page directly by clicking the relevant button.
Service:
Figure 3-11 Service
In “Service” tab, you can check AMI /SSH/FTP/TFTP/HTTP/HTTPS status. You can
enter the configuration page directly by clicking the relevant button.
Port:
Figure 3-12 Port
In “Port” tab, you can check SIP port, HTTP port and HTTPS port. You can also enter
the relevant page by clicking the button in “Setting” column.
We recommend changing the default port for security.
3.2.2 Alert settings
If the device is under attack, the system will alert users via call or E-mail.
17/60

TA1600/2400/3200 FXS Gateway User Manual
The attack modes include IP attack and Web Login.
•IPATTACK
When the system is attacked by IP address, the firewall will add the IP to auto IP
Blacklist and notify the user if it matches the protection rule.
•WEBLOGIN
Web Login Alert Notification: entering the wrong password consecutively for five
times when logging in TA FXS Gateway Web interface will be deemed as an
attack, the system will limit the IP login within 10 minutes and notify the user.
Figure 3-13 Alert Settings
Table 3-6 Description of Alert Settings
Phone Notification Settings
PHONE
Notification
Whether to enable phone notification or not.
Number
The numbers could be set for alert notification; users can
setup multiple extension and outbound phone numbers.
Please separate them by “;”.
Example: “500;9911”, if the extension has configured Follow
Me Settings, the call would go to the forwarded number
directly.
18/60

TA1600/2400/3200 FXS Gateway User Manual
Attempts
The attempts to dial a phone number when there is no
answer.
Interval
The interval between each attempt to dial the phone number.
Must be longer than 3 seconds, the default value is 60
seconds.
Prompt
Users will hear the prompt while receiving the phone
notification.
Email Notification Settings
E-mail
Notification
Whether to enable E-mail Notification or not.
Recipient’s
Name
The recipients for the alert notification, and multiple email
addresses are allowed, please separate them by “;”.
E.g. [email protected];[e-mail],[email protected]
Subject
The subject of the alert email.
Email Content
Text content supports predefined variables. Variable names
and corresponding instructions are as follows:
gateway hostname:$(HOSTNAME)
attack source ip address:$(SOURCEIP)
attack dest mac:$(DESTMAC)
attack source port:$(DESTPORT)
attack source protocol:$(PROTOCOL)
attack occurred:$(DATETIME)
19/60

TA1600/2400/3200 FXS Gateway User Manual
3.2.3 AMI Settings
The Asterisk Manager Interface (AMI) is a system monitoring and management
interface provided by Asterisk. It allows live monitoring of events that occur in the
system, as well enabling you to request that Asterisk perform some action. The
actions that are available are wide-ranging and include things such as returning status
information and originating new calls. Many interesting applications have been
developed on top of Asterisk that take advantage of the AMI as their primary interface
to Asterisk.
There are two main types of messages on the Asterisk Manager Interface: manager
events and manager actions.
The 3rd party software can work with TA FXS Gateway using AMI interface. It is
disabled by default. If necessary, you can enable it.
Figure 3-14 AMI Settings
Username & password: after enabling AMI, you can use this username and
password to log in TA FXS Gateway AMI.
Permitted "IP address/Subnet mask": you can set which IP can log in TA FXS
Gateway AMI interface.
3.2.4 Certificates
TA FXS Gateway can support TLS trunk. Before you register TLS trunk to TA FXS
Gateway, you should upload certificates first.
20/60