Yeastar Technology NeoGate TA1600 User manual

Sales Tel: [phone]
E-mail: [e-mail]
Support Tel: [phone]
E-mail: [e-mail]
Web: http://www.yeastar.com
Version: 47.0.0.49
Revised: September 17, 2019

TA1600/2400/3200 User Manual
2/87
Copyright
Copyright 2006-2019 Yeastar Information Technology Co., Ltd. All rights reserved.
No parts of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, photocopying, recording, or otherwise, for any
purpose, without the express written permission of Yeastar Information Technology
Co., Ltd. Under the law, reproducing includes translating into another language or
format.
Declaration of Conformity
Hereby, Yeastar Information Technology Co., Ltd. declares
that TA1600/2400/3200 is in conformity with the essential
requirements and other relevant provisions of the CE, FCC.
Warranty
The information in this document is subject to change without notice.
Yeastar Information Technology Co., Ltd. makes no warranty of any kind with regard
to this guide, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose. Yeastar Information Technology Co., Ltd. shall not
be liable for errors contained herein nor for incidental or consequential damages in
connection with the furnishing, performance or use of this guide.
WEEE Warning
In accordance with the requirements of council directive 2002/96/EC on
Waste of Electrical and Electronic Equipment (WEEE), ensure that at
end-of-life you separate this product from other waste and scrap and
deliver to the WEEE collection system in your country for recycling.

TA1600/2400/3200 User Manual
3/87
Contents
About This Guide................................................................................................6
Getting Started....................................................................................................8
Accessing Web GUI..........................................................................................................8
Web Configuration Panel ................................................................................................10
Making and Receiving Calls............................................................................................10
Basic Operations .............................................................................................. 11
Voice Menu.....................................................................................................................11
Call Hold.........................................................................................................................12
Call Waiting ....................................................................................................................12
Call Transfer ...................................................................................................................13
Three-party Conference..................................................................................................14
Direct IP Call ..................................................................................................................14
Change TA1600/2400/3200’s IP Address Using Analog Phones......................................14
FXS Port Settings .............................................................................................16
General Settings.............................................................................................................16
Other Settings ................................................................................................................19
Hunt Group.....................................................................................................................21
VoIP Settings.....................................................................................................24
VoIP Server Settings.......................................................................................................24
Dial Pattern Template......................................................................................................27
SIP Settings....................................................................................................................28
IAX Settings....................................................................................................................35
Gateway Settings..............................................................................................37
Basic Preferences...........................................................................................................37

TA1600/2400/3200 User Manual
4/87
Feature Codes................................................................................................................38
Speed Dial......................................................................................................................42
Prompt Settings................................................................................................43
Custom Prompts.............................................................................................................43
Music on Hold Prompts...................................................................................................44
System Prompts .............................................................................................................45
Advanced Settings............................................................................................46
Distinctive Ringtones ......................................................................................................46
Tone Zone Settings.........................................................................................................46
RADIUS Settings............................................................................................................48
Network Preferences ........................................................................................50
LAN Settings ..................................................................................................................50
WAN Settings .................................................................................................................52
Service ...........................................................................................................................54
VLAN Settings ................................................................................................................54
VPN Settings..................................................................................................................55
DDNS Settings ...............................................................................................................56
Static Route....................................................................................................................57
SNMP Settings ...............................................................................................................59
TR-069 Settings..............................................................................................................59
Remote Management .....................................................................................................61
Security Center.................................................................................................63
Security Center...............................................................................................................63
Alert Settings..................................................................................................................65
AMI Settings...................................................................................................................67
Certificates .....................................................................................................................68
Firewall Rules.................................................................................................................69

TA1600/2400/3200 User Manual
5/87
IP Blocklist......................................................................................................................71
System Preferences..........................................................................................73
Password Settings..........................................................................................................73
Date and Time ................................................................................................................74
Auto Provision Settings...................................................................................................74
Firmware Upgrade..........................................................................................................77
Upgrade through HTTP................................................................................................78
Upgrade through TFTP ................................................................................................78
Backup and Restore .......................................................................................................80
Reset and Reboot...........................................................................................................81
Status................................................................................................................82
FXS Port Status..............................................................................................................82
Network status................................................................................................................83
System Info ....................................................................................................................84
Reports .............................................................................................................85
Call Logs ........................................................................................................................85
System Logs...................................................................................................................85
Packet Tool.....................................................................................................................86
Port Monitor Tool.............................................................................................................87

TA1600/2400/3200 User Manual
6/87
About This Guide
YeastarTA1600/2400/3200 FXS Analog VoIP Gateways are cutting-edge products
that connect legacy telephones, fax machines and PBX systems with IP telephony
networks and IP-based PBX systems. Featuring rich functionalities and easy
configuration, Yeastar TA is ideal for small and medium enterprises that wish to
integrate a traditional phone system into IP-based system. Yeastar TA helps them to
preserve previous investment on legacy telephone system and reduce
communication costs significantly with the true benefits of VoIP.
Audience
This manual will help you learn how to operate and manage your TA1600/2400/3200
FXS Analog VoIP Gateway. In this guide, we describe every detail on the functionality
and configuration of TA1600/2400/3200. We begin by assuming that you are
interested in TA1600/2400/3200 and familiar with networking and other IT
disciplines.
Safety when working with electricity
Features Highlights
16/24/32 FXS ports
Fully compliant with SIP and IAX2
Hunt Group
Configurable VoIP Server templates
Reliable FAX performance with T.38
3-party conference
Direct IP Calling
Inter-port Calling
Do not open the device when the device is powered on.
Do not work on the device, connect or disconnect cables when
lightning strikes.

TA1600/2400/3200 User Manual
7/87
Attended Transfer
Blind Transfer
Support RADIUS protocol
Support SNMP
Support TR-069
Check the TA1600/2400/3200 Installation Guide here:
www.yeastar.com/download/TAXX00/Yeastar_TA1600&2400&3200_V3_Installation_
Guide_en.pdf
For more information, please click:
https://www.yeastar.com/fxs-voip-gateways/

TA1600/2400/3200 User Manual
8/87
Getting Started
In this chapter, we guide you through the basic steps to start with a new
TA1600/2400/3200:
Accessing Web GUI
Web Configuration Panel
Making and Receiving Calls
Accessing Web GUI
The TA1600/2400/3200 attempts to contact a DHCP server in your network to obtain
valid network settings (e.g., the IP address, subnet mask, default gateway address
and DNS address) by default.
Please enable DHCP Server in your network to obtain the TA1600/2400/3200 IP
address.
How to check TA1600/2400/3200 IP address:
1. Pick up the analog phone, then access the voice menu prompt by dialing “***”.
2. Dial "1" to check the IP address.
3. Dial "2" for web access address.
After entering the IP address in the web browser, users will see a log-in screen.
Check the default settings below:
Username: admin
Password: password

TA1600/2400/3200 User Manual
9/87
Figure 2-1 TA1600/2400/3200 Login page

TA1600/2400/3200 User Manual
10/87
Web Configuration Panel
There are 4 main sections on the Web Configuration Panel for users to check the
TA1600/2400/3200’s status and configure it.
Status: check System Status, Port Status, Trunk Status, Network Status and
check call logs, system logs.
System: configure Network Settings, Security related Settings, System Date and
Time, Password, Backup and Restore, etc.
Gateway: configure FXS ports, gateway settings and SIP settings, etc.
Logout: log out TA1600/2400/3200.
Note: After saving the changes, remember to click the “Apply changes” button on the
upper right corner of the Web GUI to make the changes take effect.
Making and Receiving Calls
You will need an active VoIP account from a VoIP service provider or PBX, which
provides a VoIP telephone number to allow you to make and receive calls.
Making internal calls
To place an internal call, pick up the analog phone and dial the other port’s caller
ID number or dial *99 followed by the port number.
For example, to reach the other port with caller ID number 300, dial “300”.
To reach port 2, you can dial *9902 to ring the phone connected to port 2.
Making outbound calls
To make an outbound call, you need to dial according to the FXS port dial pattern.
By the default dial pattern, you can dial the desired outgoing number directly.
Answering calls
To answer a call, pick up the handset as you usually do.

TA1600/2400/3200 User Manual
11/87
Basic Operations
In this chapter, we give instructions about how to operate on analog phones
connected to TA1600/2400/3200 to use some features.
Voice Menu
Call Hold
Call Waiting
Call Transfer
Three-party Conference
Direct IP Call
Change TA1600/2400/3200’s IP Address
Voice Menu
TA1600/2400/3200 provides a voice menu to guide you to configure the network
settings for the device. You need to press *** on the analog phone which is connected
to TA1600/2400/3200’s FXS port to enter the voice menu.
The default password to enter “Advanced Settings” is 123456. You can change the
password on TA1600/2400/3200 Web page.(Gateway→Gateway Settings→Feature
Codes→Voice Menu Password Settings)

TA1600/2400/3200 User Manual
12/87
Figure 3-1 TA1600/2400/3200 Voice Menu
Tips:
1. Press “9” to listen to the prompt again.
2. Press “*” to return to the last menu.
Call Hold
An active call can be held by pressing "flash" key on the analog phone. Press the key
again to resume the call.
If there is no "flash" key on the phone, you can use "hook flash" (quickly toggle on-off
hook) to hold a call. The call may be disconnected by chance if using "hook flash".
Call Waiting
If the call waiting is activated for the FXS port, the FXS user who is in a call can hear a
call waiting tone "beep" when there is a new incoming call. The user can press "hook

TA1600/2400/3200 User Manual
13/87
flash" to toggle between the active call and the incoming call.
Figure 3-2 Enable Call Waiting
Call Transfer
Blind transfer and attended transfer are supported on TA1600/2400/3200. Users can
achieve call transfer by pressing the feature code during the call.
Blind Transfer
Default feature code: *03
1. Dial "*03" during the call;
2. Dial the called number after hearing a prompt "transfer";
3. The call will be transferred after the number is dialed.
Attended Transfer
Default feature code: *3
1. Dial "*3" during the call;
2. Dial the called number after hearing a prompt "transfer";
3. Talk to the transfer recipient;
4. The call will be transferred after hanging up.

TA1600/2400/3200 User Manual
14/87
Three-party Conference
Users can make a three-party conference call on TA1600/2400/3200.
Assuming that A and B are in the call and B wants to invite C to a conference. Please
check the following steps of how to establish a conference.
1. B presses "flash" key or taps hook flash to get a dial tone; A will hear the on hold
music meanwhile;
2. B dials C's number;
3. If C answers the call, then B presses "flash" key or tap hook flash, the conference
will be established, including A, B, and C.
4. If there is no answer on C, A can press "flash" key or tap hook flash to resume the
call with A.
5. C will be ejected if B presses "flash" key or taps flash hook during the conference
call.
Direct IP Call
Direct IP call allows two parties, that is, a FXS Port with an analog phone and another
VoIP Device, to talk to each other in an ad hoc fashion without a SIP proxy. The
default "Direct IP Calling" feature code is *96.
Example:
Target IP address: 192.168.2.123
Destination port: 5060
To call the IP phone, you should dial *96192*168*2*123*5060 on the analog phone.
Change TA1600/2400/3200’s IP Address Using Analog
Phones
By default, TA1600/2400/3200 obtains a dynamic IP address from the DHCP server.
You can change the device’s IP address via the analog phone which is connected to
the FXS port.

TA1600/2400/3200 User Manual
15/87
There are 3 modes supported on TA1600/2400/3200 access the internet.
DHCP
Static IP Address
PPPoE
Here we introduce how to set a static IP address for TA1600/2400/3200.
IP address: 192.168.10.125
Subnet mask: 255.255.255.0
Gateway: 192.168.10.1
DNS: 8.8.8.8
1. Press *** to enter the voice menu.
2. Press 3 to enter the “Advanced Settings”.
3. Enter the password follow by the pound key: 123456# (The default password is
123456).
4. Press 2 to change the IP address.
5. Press 2 to enable the static IP.
6. Press 1 to change the IP address and follow by the new IP address
(1192*168*10*125).
7. Press 2 to change the subnet mask and follow by the new subnet mask
(2255*255*255*0).
8. Press 3 to change the gateway and follow by the new gateway (3192*168*10*1).
9. Press 4 to change the DNS and followed by the new DNS (48*8*8*8).
10. Press 5 to reboot the device.
11. After reboot, you can access the device by the new IP address.

TA1600/2400/3200 User Manual
16/87
FXS Port Settings
This chapter explains how to configure FXS port on TA1600/2400/3200, go to
Gateway→Port List→Port List page to configure the FXS ports.
General Settings
Other Settings
Hunt Group
Click "Edit" button to configure the FXS port.
General Settings
Figure 4-1 FXS Port General Settings

TA1600/2400/3200 User Manual
17/87
Table 4-1 Description of FXS Port General Settings
Items
Description
General
Caller ID Name
A character-based name for this user. For
example, Bob Jones.
Caller ID Number
The Caller ID string used when this user calls
another user.
VoIP Serer
Template
VoIP Server
Choose a VoIP server, where the account will be
registered.
User Name
User name provided by VoIP server.
Authentication
Name
Authentication name provided by VoIP server.
Password
Authentication password provided by VoIP
server.
From User
Provided by VoIP server. Keep this field blank if
not needed.
Route
Settings
Dial Pattern
Template
The account will be allowed to make outbound
calls according to the selected template.
DID Number
Defines the expected DID number if this trunk
passes DID on incoming calls. Leave this field
blank to match calls with any or no DID info.
Hotline
Enable Hotline
Select whether to use Hotline or not. Hotline is
disabled by default. If this feature is enabled, the
system will dial out the hotline number
automatically after off-hook.
Hotline Number
Set the number to dial out automatically after
off-hook.
Delay Dial
Define how long to make Hotline take effect after
you pick up the phone.
Flash
Send Hook Flash
Event
If the option “Send Hook Flash Event” is set to
“Yes”, when pressing the flash key on the analog
phone during an active call. TA will send a SIP
DTMF flash event to the VoIP server. It can be

TA1600/2400/3200 User Manual
18/87
an interoperation with a FXO gateway which is
used for informing FXO gateway to generate the
flash signal to the CO line.
Min Flash Time
Sets the minimum time the phone is on hook
before being detected as a hook flash.
Max Flash Time
Sets the maximum flash time.
Call Duration Setting
Setup the max cull duration for every call of this
user, but it’s only valid for outbound calls.
Note: this setting will not be valid for internal
calls.
Echo Cancellation Setting
To disable or enable echo cancellation. If the line
is used to connect POS machine, it is suggested
that echo cancellation is disabled.

TA1600/2400/3200 User Manual
19/87
Other Settings
Figure 4-2 FXS Port Other Settings
Table 4-2 Description of FXS Port Other Settings
Follow Me
Choose the forward type and configure the relevant destination number. In different
conditions, the incoming calls to the account will be forwarded to different
destinations.
Always: always forward calls to the destination number.
No Answer: forward calls when no one answers the call.

TA1600/2400/3200 User Manual
20/87
When Busy: forward the call when the account is busy.
Features
Call Waiting
Check this option if the extension should have Call Waiting
capability. If this option is checked, the “When busy”follow
me options will not be available.
DND
Don’t Disturb. When DND is enabled for an extension, the
extension will not be available.
Ring Timeout
Check this option if you want to customize the ring time. Ring
tone will stop over the time defined.
Volume Settings
Rxgain
Adjust receive gain.
Txgain
Adjust transmit gain.
Caller ID Settings
Caller ID Signalling
choose the Caller ID signaling:
FSK
DTMF.
Sending Mode
choose the Caller ID Sending mode:
Ring + Caller ID + Ring
Caller ID + Ring
Polarity + Caller ID + Ring
Note: if the FXS port is connected to a device’s FXO port,
Caller ID settings on FXS port and FXO port should be the
same, or the call cannot be established.
Caller ID Type
choose the Caller ID Type:
Bell-USA
V23-UK
V23-NTT Japan