Yeastar Technology NeoGate TA1600 User manual

blank
Installation Guide
Yeastar TA1600/2400/3200 V3/V4
FXS VoIP Gateway
TA1600/2400/3200 Installation Guide
Version: 1.0
Date: 2022-02-15

Contents
Safety Disclaimers and Installation Warnings............................................................................1
Packing List................................................................................................................................... 2
Hardware Overview....................................................................................................................... 3
TA1600 Hardware Overview................................................................................................. 3
TA2400 Hardware Overview................................................................................................. 4
TA3200 Hardware Overview................................................................................................. 6
Connect Yeastar TA Gateway...................................................................................................... 8
Connect Yeastar TA Gateway (Frame Ground).......................................................................... 9

Safety Disclaimers and Installation Warnings
To avoid unexpected accident, personal injury or device damage, read the safety disclaimers
and installation warnings.
Power
•Use only the power cord provided with the Yeastar TA device.
•Keep the power off during the installation.
•Make sure that the supply voltage matches the specifications indicated on the back
panel of the device.
•To avoid the electric accident, do not open or remove the cover of device when it is
working as well as off the power.
•Before cleaning the device, cut off the power supply.
Environment
Install the Yeastar TA device in a location that is clean, free from vibration, electric shock,
and temperature/humidity extremes.
Table 1.
Environment Requirement
Storage Temperature -20 to 65°C, 4 to 149°F
Humidity 10% to 90% (non-condensing)
Operation Tempera
ture
0 to 40°C, 32 to 104°F

Packing List
Upon receiving Yeastar TA 1600/2400/3200 gateway, you can open the package and check
if all the items are supplied as per packing list.
Note:
If there are any problems, contact your provider.
Table 2. TA1600/2400/3200 packing list
Item Unit QTY Description
TA1600/2400/3200 PC 1 Device unit.
Power cord PC 1 For the input of power.
RJ45 Ethernet cable PC 1 -
Warranty card PC 1 With serial number printed for repair & re
turn.
Quick installation
guide
PC 1 -
Mounting ears PC 2 -
Mounting screws PC 8 8 screws (φ3.0*6 mm) for mounting ears.
Grounding stud and
nut
Pair 1 -
Rubber feet PC 4 -

Hardware Overview
TA1600 Hardware Overview
TA1600 front panel
Table 3.
No. Feature Description
①Reset Button
Press and hold for 7 seconds to reset to factory defaults.
Note:
Do NOT press this button for a long time, or the sys
tem would break down.
②Power LED
Indicates the power status.
•On: The power is switched on.
•Off: The power is switched off.
③RUN LED
Indicates the system status.
•Blinking: The system is working properly.
•Not Blinking/Off: The system goes wrong.
④WAN Port 10/100 adaptive RJ45 Ethernet port.
⑤LAN Port 10/100 adaptive RJ45 Ethernet port.
⑥FXS Ports Status Indicates the FXS port status.
•Solid green: The port is idle or no line is connected to
the port.
•Green light blinking: There is a call reaches the port or
the port is busy in a call.

TA1600/2400/3200 Installation Guide | 3 - Hardware Overview | 4
Table 3. (continued)
No. Feature Description
⑦RJ11 FXS Ports For connection to analog phones or fax machines.
TA1600 back panel
Table 4.
No. Feature Description
⑧RJ21 FXS Ports For connection to analog phones or fax machines with one
RJ21 to RJ11 cable.
⑨Power Switch Press this button to switch on/off the device.
⑩Power Inlet Connect the power supply to the port.
⑪Protective Earth Protect the personnel and the equipment.
TA2400 Hardware Overview
TA2400 front panel
Table 5.
No. Feature Description
①Reset Button Press and hold for 7 seconds to reset to factory defaults.

TA1600/2400/3200 Installation Guide | 3 - Hardware Overview | 5
Table 5. (continued)
No. Feature Description
Note:
Do NOT press this button for a long time, or the sys
tem would break down.
②Power LED
Indicates the power status.
•On: The power is switched on.
•Off: The power is switched off.
③RUN LED
Indicates the system status.
•Blinking: The system is working properly.
•Not Blinking/Off: The system goes wrong.
④WAN Port 10/100 adaptive RJ45 Ethernet port.
⑤LAN Port 10/100 adaptive RJ45 Ethernet port.
⑥FXS Ports Status Indicates the FXS port status.
•Solid green: The port is idle or no line is connected to
the port.
•Green light blinking: There is a call reaches the port or
the port is busy in a call.
⑦RJ11 FXS Ports For connection to analog phones or fax machines.
TA2400 back panel
Table 6.
No. Feature Description
⑧RJ21 FXS Ports For connection to analog phones or fax machines with one
RJ21 to RJ11 cable.
⑨Power Switch Press this button to switch on/off the device.
⑩Power Inlet Connect the power supply to the port.

TA1600/2400/3200 Installation Guide | 3 - Hardware Overview | 6
Table 6. (continued)
No. Feature Description
⑪Protective Earth Protect the personnel and the equipment.
TA3200 Hardware Overview
TA3200 front panel
Table 7.
No. Feature Description
①Reset Button
Press and hold for 7 seconds to reset to factory defaults.
Note:
Do NOT press this button for a long time, or the sys
tem would break down.
②Power LED
Indicates the power status.
•On: The power is switched on.
•Off: The power is switched off.
③RUN LED
Indicates the system status.
•Blinking: The system is working properly.
•Not Blinking/Off: The system goes wrong.
④WAN Port 10/100 adaptive RJ45 Ethernet port.
⑤LAN Port 10/100 adaptive RJ45 Ethernet port.
⑥FXS Ports Status Indicates the FXS port status.

TA1600/2400/3200 Installation Guide | 3 - Hardware Overview | 7
Table 7. (continued)
No. Feature Description
•Solid green: The port is idle or no line is connected to
the port.
•Green light blinking: There is a call reaches the port or
the port is busy in a call.
⑦RJ11 FXS Ports For connection to analog phones or fax machines.
TA3200 back panel
Table 8.
No. Feature Description
⑧RJ21 FXS Ports For connection to analog phones or fax machines with one
RJ21 to RJ11 cable.
⑨Power Switch Press this button to switch on/off the device.
⑩Power Inlet Connect the power supply to the port.
⑪Protective Earth Protect the personnel and the equipment.

Connect Yeastar TA Gateway
Follow the steps to connect Yeastar TA1600/2400/3200 FXS VoIP gateway.
1. Connect TA gateway to the Internet
LAN port can be connected to router or PBX.
2. Connect TA gateway to analog phones
FXS ports can be connected to analog phones.
3. Power on TA gateway
Connect one end of the power cord to the gateway’s power port; plug the other end in
to an electrical outlet.

Connect Yeastar TA Gateway (Frame Ground)
Yeastar TA1600/2400/3200 FXS VoIP gateway supports ground protection. Follow the in
structions to connect the TA gateway to the ground.
Warning:
•The ground wire must be installed by the service person.
•Proper grounding (connection to ground) is very important to reduce the risk
to the user of electrocution or to protect the TA device from the bad effects of
external noise in the case of a lightning strike.
•A permanent connection between ground and the ground terminal of the TA
device must be made.
1. Tighten the provided M3*5 screw stud into the grounding port on TA device.
2. Insert an 18AWG grounding wire (user-supplied).
3. Tighten the provided M3 screw nut using a straight screwdriver.
4. Attach the grounding wire to the grounding terminal.