ZALMAN CNPS7000B Series User manual

* Please read before installation
http://www.zalman.co.kr http://www.zalmanusa.com
CNPS7000B
Intel Pentium 4
Socket 478 CPU
AMD Duron/Athlon/Athlon XP
Socket 462 CPU
AMD Sempron/AMD64 (Athlon 64/Opteron)
Socket 754/939/940 CPU
User
’’
s Manual
(English Edition)
User
’’
s Manual
All manuals and user guides at all-guides.com
all-guides.com

1) Does not generate noise or vibration in Silent Mode.
2) Pure copper and/or pure aluminum base materials ensure excellent heat dissipation.
3) Intel Pentium (Socket 78), AMD Duron / Athlon / Athlon XP (Socket 62), and Sempron / AMD6
(Socket 75 /939/9 0) compatible design for broad compatibility.
) 92mm fan inside the FHS maximizes airflow and makes installation easier.
5) Adjustable fan speed controller (FAM MATE 2) enables control of noise and fan performance.
6) Fan should be set to Normal Mode if OVERCLOCKING.
7) Zalman Tech Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING.
2) Fan
- Bearing Type : 2-Ball
- Rotation Speed : 1,350rpm 10 % (Silent Mode)
2, 00rpm 10 % (Normal Mode)
- Noise Level : 20dB 10% (Silent Mode) - measured at 1m distance from noise source
25dB 10% (Normal Mode) - measured at 1m distance from noise source
3) FAN MATE 2
- Output Voltage : 5V ~ 11V 2 %
- Allowable Power : 6W or lower
Note 1)
The maximum weight for a cooler is specified as 50g for Intel Socket 78 and AMD Socket 75 /939/9 0
and 300g for AMD Socket 62. Special care should be taken when moving a computer equipped with a
cooler which exceeds the relevant weight limit. Zalman is not responsible for any damage that occurs when
moving a computer.
1) Flower Heats nk (FHS)
CNPS7000B-AlCu CNPS7000B-Cu
Model
Spec.
Weight (g)
T.R.
(°C/W )
Silent Mode
Normal Mode
438(1)
0.29
0.22
109 (L) X 109 (W) X 62 (H)
3,154
755(1)
0.27
0.20
Dimensions (mm)
Dissipation Area ( ㎠ )
※
The specifications of any product may change without prior notice to improve performance.
1
1. Features
3. Exploded View
. Specifications
Fan
Clip
Fan Support
Fan Fixing Screw
Bolt
Fan Support Fixing Screw
FHS
All manuals and user guides at all-guides.com

※
The specifications of any product may change without prior notice to improve performance.
󳣍Korean Patent Application No. 00-5 635
󳣍Korean Design Applications Nos. 02-17 70, 02-25208, 02-25209, etc.
󳣍Patent Applications pending in over 20 nations around the world, including USA, EU, and Japan
4. Patents
1) Common Components
❶ FHS Assembly (CNPS7000B-AlCu/Cu)
❷ Four ( ) Bolts (for installing the FHS)
❸ Thermal Grease
❹ Fan Speed Controller (FAN MATE 2)
❺ Double - sided Tape (for installing FAN MATE 2)
❻ Cable for FAN MATE 2
❼ User’s Manual (in English and Korean)
❶
❽
❾
❿
󱆎󱆏
❷
❹
❸
❺
❼
❻
5. Components
2) Components for Intel Pentium (Socket 78)
❽ Two (2) Clip Supports For Socket 78
3)
Components for AMD Duron / Athlon / Athlon XP (Socket 62)
❾ One (1) A-Type (blue) Clip Support for Socket 62
❿ One (1) B-Type (white) Clip Support for Socket 62
󱆌 Four ( ) Bolts (for fastening the Clip Supports)
󱆍 One (1) set of Washers
)
Components for AMD Sempron / AMD6 (Socket 75 /939/9 0)
󱆎 Two (2) Nipples
󱆏 One (1) Backplate
󱆐 Big washers (from component 󱆍 )
󱆌
󱆍󱆐
Precautions
1) If excessive force is exerted on the fan, it may malfunction and result in damage to the product and/or the computer.
2) Do not put your finger in the fan while it is running.
3) Keep the product away from children.
) Check the components list and condition of the product before installing. If there is any problem, contact the shop
where you purchased it and get a replacement or refund.
5) The exposed core of a Socket 62 CPU can be cracked if proper care is not taken. Read the “Installation” section
thoroughly before installing.
NOTICE) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including improper
use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or
improper testing.
All manuals and user guides at all-guides.com

※
The specifications of any product may change without prior notice to improve performance.
3
1) Intel Pent um 4 - Socket 478
All speeds of Pentium Socket 78 CPUs up to 3. GHz
When using 3. GHz Northwood CPU or Prescott CPUs of 2.8A/E GHz or faster, please refer to the
following table to set the fan speed accordingly for sufficient cooling.
6. Compatible CPUs
Cautions )
①As shown in Figure 2, a motherboard that is not compliant with the“10.2mm Motherboard
component height restriction”standard, introduced by Intel, may create interference between
components and the clip. Please do not install the CNPS7000B if this interference is observed.
②No components higher than 39mm (possible examples : PSU, graphics card, RAM, etc.) should
be present within a 55mm radius from the center of the CPU to install this product.
③For more information, please visit the Zalman website (http://www.zalman.co.kr) and click on“Compatibility
between CNPS7000(A/B) and Socket 78 Pentium Motherboards”
link.
2) AMD Duron / Athlon / Athlon XP - Socket 462
All CPUs conforming to Socket 62 platform
Cautions )
①This product requires “Heatsink Attach Holes”around the
CPU socket as shown on the right.
②No components higher than 39mm (possible examples : PSU,
graphics card, RAM, etc.) should be present within a 55mm
radius from the center of the CPU to install this product.
③
This product cannot be installed if any motherboard component
(usually capacitor) taller than 15mm is located under the clip.
④For more information, please visit the Zalman website
(http://www.zalman.co.kr) and refer to“CNPS7000(A/B) Compatible
Socket 62 Motherboards List”
link.
②
①
③
10.2mm Motherboard component height restriction
Clip
Clip
Motherboard
Component
Motherboard Component
F gure 1
Compat ble
F gure 2
Not Compat ble
Top V ew Top V ew
S de V ew S de V ew
< CNPS7000B Fan Speed Table >
Northwood
3.4 2.8A/E, 3.0E, 3.2E, 3.4E
Prescott
CP
Cooler
CNPS7000B-AlCu
CNPS7000B-Cu
2,500 rpm or faster
2,200 rpm or faster
※ Fan speed of 2,500rpm can be obtained by directly connecting 3-pin fan connector to motherboard. (Without Fan Controller)
All manuals and user guides at all-guides.com

※
The specifications of any product may change without prior notice to improve performance.
4
3) AMD Sempron / AMD64 - Socket 754/939/940
All CPUs conforming to Socket 75 /939/9 0 platform
Cautions )
①No components higher than 39mm (possible examples: PSU,
graphics card, RAM, etc.) should be present within a 55mm
radius from the center of the CPU to install this product.
②For more information, please visit the Zalman website
(http://www.zalman.co.kr) and refer to “CNPS7000(A/B) “Compatible
Socket 75 /939/9 0 Motherboards List”
link.
①
1) Apply Thermal Grease
Clean off particles and residue and then spread
the included thermal grease thinly and evenly over
the CPU that touches the FHS surface.
2) Install Cl p Supports for Socket 478
Install the clip supports for socket 78 on both sides of
the retention guide as shown on the right.
3) Insert Bolts
Insert the two bolts into the inner holes of the clip.
4) Place FHS
Set the FHS at the center of the CPU. Screw the
bolts in slightly, and then tighten them in an alternating
fashion until the clip supports are completely pressed
against the clip.
7. Installation (Intel Pentium 4 - 478)
CPU (IHS)
Thermal Grease
Retention Guide
Clip Support for Socket 78
󳦈
󳦇
󳦊
Bolt
Inner Hole
Clip
FHS
Cilp Support for
Socket 78
5) Supply Power (Connect FAN MATE 2)
◆ Please refer to FAN MATE 2 Installation and Usage on page 7.
All manuals and user guides at all-guides.com

※
The specifications of any product may change without prior notice to improve performance.
5
1) Install Cl p Supports for Socket 462
Install the clip supports for socket 62 on the motherboard. Make sure to place A-type (blue : nstalled
near the lever) and B-type (wh te) supports at the appropr ate locat on.
The installation should be done in the order of : bolts > small washers > motherboard > small washers >
clip supports (see below).
2) Apply Thermal Grease
Clean off particles and residue and then spread the
included thermal grease thinly and evenly over the CPU
core that touches the FHS surface.
8. Installation (AMD Duron / Athlon / Athlon XP - 46 )
5) Supply Power (Connect FAN MATE 2)
◆ Please refer to FAN MATE 2 Installation and Usage on page 7.
CPU
Thermal Grease
Bolt
Inner Hole
Clip
FHS
Cilp Support for
Socket 62
3) Insert Bolts
Insert the two bolts into the inner holes of the clip.
4) Place FHS
Set the FHS at the center of the CPU. Screw the
bolts in slightly, and then tighten them in an alternating
fashion until the clip supports are completely pressed
against the clip.
Clip Support B for Socket 62 (White)
Lever
Small Washer
Motherboard
Small Washer
Bolt
Clip Support B for Socket 62 (White)
Clip Support A for
Socket 62 (Blue)
All manuals and user guides at all-guides.com
all-guides.com

※
The specifications of any product may change without prior notice to improve performance.
6
1) Fasten N pples
Place a big washer on the motherboard. Then, put a nipple over it and fasten the nipple until the
motherboard is firmly stuck to the backplate.
* Retention Guide is not needed when installing CNPS7000B on Socket 75 /939/9 0.
3) Insert Bolts
Insert the two bolts into the outer holes of the clip.
4) Place FHS
Set the FHS at the center of the CPU. Screw the
bolts in slightly, and then tighten them in an alternating
fashion until the nipples are completely pressed against
the clip.
9. Installation (AMD Sempron / AMD64 - 754/939/940)
Bolt
Outer Hole
Clip
FHS
Nipple
5) Supply Power (Connect FAN MATE 2)
◆ Please refer to FAN MATE 2 Installation and Usage on page 7.
Backplate
Nipple
Motherboard
Big Washer
2) Apply Thermal Grease
Clean off particles and residue and then spread the
included thermal grease thinly and evenly over the
CPU that touches the FHS surface.
CPU (Lid)
Thermal Grease
All manuals and user guides at all-guides.com

※
The specifications of any product may change without prior notice to improve performance.
7
1) Installing FAN MATE 2 on the Inside of the System 2) Installing FAN MATE 2 on the Outside of the System
※FAN MATE Installation and Usage
10. Notes on Usage
11. Thermal Resistance (℃/W) & Noise (dB) Curve
Connect the appropriate 3-pin connector on the
cable to the motherboard fan header and the
CNPS7000B’s fan connector.
Pull the 6-pin connector out of the system through
the back and connect it to FAN MATE 2, which
should be installed on the case using the included
double-sided tape.
◆ When the speed control knob on FAN MATE 2 is turned fully counter-clockwise, the fan operates in Silent Mode.
Turned fully clockwise, it operates in Normal Mode. You can select the desired fan speed by turning the knob.
Note) FAN MATE 2 has been specifically designed for the fan of this product. Zalman Tech Co., Ltd. is not
responsible for any damage to systems or CPUs caused by using it with other types of fans.
1) Check ng CPU Compat b l ty
Please refer to “Compatible CPUs” on page 3 to confirm that your CPU is compatible before using the CPU cooler.
2) Caut ons Dur ng Boot ng
When booting the computer, it may automatically power down after an alarm sound by a system
monitoring program to indicate that the the CPU fan is rotating slowly. If this happens, turn the speed
control knob fully clockwise to increase the fan speed. Then set ‘CPU Fan Detected’ to ‘Disabled’ in the
BIOS settings, or set the slowest rotational speed of the CPU fan in the system monitoring program to
less than or equal to 1,300rpm.
Note) Some motherboards do not boot if the rotational speed of the CPU fan is below a certain
rpm. If the BIOS settings are updated, Silent Mode can be used. For more information on
updating your BIOS, please refer to your motherboard manufacturer's website. Disabling
CPU fan speed detection in BIOS settings does not affect computer performance.
Fan Connector
(CNPS7000B)
Motherboard
Double-sided Tape
FAN MATE 2
6-Pin Connector
All manuals and user guides at all-guides.com

※
The specifications of any product may change without prior notice to improve performance.
When building a noiseless computer, use Zalman’s Noiseless Power Supply, Noiseless Case Fan,
Fanless Northbridge Cooler, Heatpipe HDD Cooler, Heatpipe VGA Cooler, and Fan Controller to achieve
stable performance and maintain a noiseless environment.
8
1 . Zalman Noise Prevention System
Noiseless Power Supply Fanless Northbridge Cooler Heatpipe HDD Cooler
Noiseless Case Fan Heatpipe VGA Cooler Fan Controller
All manuals and user guides at all-guides.com