Zeiss S88 User manual

S88 Floor Stand
with
Lifting Column
Instructions for use
G-30-1426-en
Issue 9.0
Printed on 28. 01. 2009

2
G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009
Key to symbols
Warning!
The warning triangle indicates potential sources of danger which may
constitute a risk of injury for the user or a health hazard.
Caution:
The square indicates situations which may lead to malfunction, defects,
collision or damage of the instrument.
Note:
The hand indicates hints on the use of the instrument or other tips for the
user.
OPMI®is a registered trademark of Carl Zeiss Surgical GmbH.

G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009
Contents
– Key to symbols 2
Functions at a glance 7
– S8 floor stand with lifting column 8
Safety 11
– Notes on installation and use 12
– Safety devices of the suspension system 20
– Warning labels and notes 30
Description 33
S8 floor stand with lifting column 35
– Intended use 35
– Description of the modules 36
– Design 36
– Stand base with lifting column 40
– Connector panel 42
– Suspension arm 44
– Display field with control keys 46
– Xenon illumination system 48
– Instrument tray (option) 54
– Video monitor (option) 56
Foot control panel (option) 64
– Intended use 64
– Design 64
– Foot control panel with 14 functions 66
– Foot control panel with 8 functions 67
Preparations for use 69
Attaching the equipment 70
Connections 74
– Connecting the surgical microscope 74

G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009
– Connecting the S light guide 74
– Mounting the strain relief device 78
– Connecting the suspension system 80
– Positioning the stand 81
– Relocating the unit 82
Operation 85
Preparations for use 86
– Setting an ergonomic working height 86
– Adjusting the balance setting of the suspension arm 88
– Adjusting the limit of downward movement 90
– Checklist 92
Using the display and key field 94
– General functions 94
– OPMI Vario on the suspension system, user interface
with SpeedFokus option 98
– Operating VISU 150 and VISU 200 118
– Operating the OPMI® PRO magis 130
What to do in an emergency 136
– Failure of a xenon lamp 136
– Failure of lamp control 140
– Failure of focusing system 140
– Failure of magnetic brakes 140
Maintenance / Further information 143
– Trouble-shooting 144
– Changing the xenon lamp module 150
– Adjusting the monitor arm 154
– Care of the unit 156
– Cleaning mechanical surfaces 156
– Sterilization 156
– Disinfecting the control keys 157
– Disposal 158
– Ordering data 159
– Accessories 161

G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009
– Spare parts 162
– Ambient requirements 163
Technical data 165
– Technical data 166
Index 173

G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009

G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009
Functions at a glance 7
Functions at a glance
S8 floor stand with lifting column 8

8Functions at a glance
G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009
S8 floor stand with lifting column
Xenon illumination system
1 Selecting a filter page 43
2 Manual activation of backup lamp page 43
3 Resetting the counter page 48
4 Opening the lamp module page 43
5 Red segment is lit - backup lamp is in use page 43
6 Control panel page 72
7 Lamp housing of xenon illumination system page 32
8 Releasing the magnetic brakes of the suspension system page 38
9 Limiting the suspension arm's downward movement page 68
10 Removing/mounting the coupling for the surgical micro-
scope
page 50
11 Balance setting page 66
12 Locking the stand in position page 34
13 Lifting/lowering the lifting column page 64
14 Locking the suspension arm in its horizontal position page 38
15 Connecting the foot control panel, connecting the remote
control connector
page 58
16 Rated voltage display page 36
17 Connector panel page 36
18 Switching on the suspension system page 58
421 53

G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009
Functions at a glance 9
67 9810 11
12 13 9 14 15 16, 17, 18

10 Functions at a glance
G-30-1426-en S88 Floor Stand with Lifting Column Issue 9.0
Printed on 28. 01. 2009