Zeiss OPMI VISU 210 User manual

OPMI®VISU 210
on S8, S81, S88
Suspension Systems
Instructions for use
G-30-1530-en
Issue 1.0
Printed on 19. 04. 2004
MISU241

Key to symbols
Different symbols used in this user's manual draw your attention to safety
aspects and useful tips. The symbols are explained in the following.
Warning!
The warning triangle indicates potential sources of danger which may
constitute a risk of injury for the user or a health hazard.
Caution:
The square indicates situations which may lead to malfunction, defects,
collision or damage of the instrument.
Note:
The hand indicates hints on the use of the instrument or other tips for the
user.
OPMI®is a registered trademark of Carl Zeiss.
OPMI®
MISU241

G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
Contents
– Key to symbols 2
Functions at a glance 7
– VISU 210 surgical microscope 8
– Illumination systems 11
– S88 floor stand 12
– S8 ceiling mount 14
– S81 ceiling mount 16
Safety 19
– Directives and standards 20
– Notes on installation and use 21
– When using a fundus imaging system (e.g. BIOM 3) 25
– Phototoxic retinal injury in eye surgery 25
– Safety devices of the suspension systems 30
– Warning labels and notes 38
Description 43
VISU 210 surgical microscope 46
– Intended use 46
– Description of the modules 46
– Illumination system 53
– Controls, displays, connections 56
– Binocular tubes and eyepieces 64
Illumination systems - halogen and xenon 68
– Halogen illumination system 68
– Xenon illumination system 72
S88 floor stand 76
– Intended use 76
– Description of the modules 77
–Design 78
MISU241

G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
– Stand base with column 82
– Connection panel 84
– Suspension arm 86
– Display field with control keys 88
– Instrument tray (option) 90
S8 Ceiling Mount 92
– Intended use 92
– Description of the modules 93
–Design 94
– Handle 98
– Power switch with connector (option) 100
– Suspension arm 102
– Display field with control keys 104
S81 ceiling mount 106
– Intended use 106
– Description of the modules 107
– Design 108
– Power switch, connector and socket (option) 112
– Suspension arm 114
– Display field with control keys 116
VISU 210 surgical microscope on S88 floor stand 118
– Intended use 118
– Design 118
VISU 210 surgical microscope on S8 ceiling mount 120
– Intended use 120
– Design 120
VISU 210 surgical microscope on S81 ceiling mount 122
– Intended use 122
– Design 122
Foot control panel (option) 124
– Intended use 124
– Design 124
MISU241

G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
Preparations 127
Attaching the equipment 128
– Mounting the surgical microscope 128
– Mounting the tube, the eyepieces and the objective lens 132
– Changing the microscope accessories 136
Connections 138
– Connecting the surgical microscope 138
– Connecting the S light guide 138
– Strain relief device on S88 floor stand 140
– Connecting the S88 floor stand 142
– Relocating the system 144
Adjusting the system - S88 floor stand 146
– Adjusting the balance setting of the suspension arm 146
– Adjusting the limit of downward movement 148
Adjusting the system - S8 ceiling mount 150
– Adjusting the balance setting of the suspension arm 150
– Adjusting the limit of downward movement 152
– Positioning the S8 ceiling mount 154
Adjusting the system - S81 ceiling mount 156
– Adjusting the balance setting of the suspension arm 156
– Adjusting the limit of downward movement 158
Adjusting the system - General 161
– Adjusting the supension system 161
– Adjusting the tilt angle 162
– Adjusting the microscope tilt to angles greater than 15° 164
– Adjusting the surgical microscope 166
Operation 167
Checklist 168
– When using a fundus imaging system (e.g. BIOM 3) 172
Positioning the S88 floor stand 174
Using the display and key field 176
– General functions 176
– Operating the OPMI on the suspension system 180
MISU241

G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
Procedure 192
What to do in an emergency 194
– Failure of the halogen lamp 194
– Failure of a xenon lamp 196
– Failure of lamp control 198
– Failure of focusing system 198
– Failure of magnetic brakes 200
– Failure of the X-Y coupling 200
– Failure of the zoom function 201
Maintenance / Further information 203
– Trouble-shooting table 204
– Changing the halogen lamp 212
– Changing the xenon lamp module 216
– Magnifications / Fields of view 218
– Care of the unit 219
– Sterilization 220
– Disinfecting the control keys 221
– Auxiliaries from Zeiss 222
– Ordering data 223
– Spare parts 225
– Accessories 227
Technical data 229
– Technical data 230
– Ambient requirements 244
Index 245
MISU241

G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
Functions at a glance 7
Functions at a glance
VISU 210 surgical microscope 8
Illumination systems 11
S88 floor stand 12
S8 ceiling mount 14
S81 ceiling mount 16
MISU241

8Functions at a glance
G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
VISU 210 surgical microscope
1 Resetting the X-Y coupling and focus to their initial posi-
tions
2 Adjusting the interpupillary distance page 64
3 Adjusting the eyecups
4 Setting your prescription
5 Handgrip page 58
6 Display of the magnification factor of the zoom system page 58
7 Changing the magnification on assistant's microscope page 62
8 Focusing of assistant's microscope page 62
9 Tilting the surgical microscope page 162
10 Arrows indicating the focusing range page 56
11 Locking screw for assistant's microscope (vertical) page 62
12 Manual zoom adjustment page 201
13 Selecting light stops page 60
14 Setting the 6° illumination page 60
15 Connecting the light guide page 138
16 Locking screw for assistant's microscope (horizontal) page 162
17 DeepView button page 60
MISU241

G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
Functions at a glance 9
1
2
3
4
5
6
89 117131210
5
7
34 14 15 16 17
MISU241

10 Functions at a glance
G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
MISU241

G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
Functions at a glance 11
Illumination systems
Halogen illumination system
1 Closed flap: main lamp is on - open flap: backup lamp
is on
Page 48
2 Selecting a filter Page 48
3 Opening the lamp module Page 48
4 Manual selection of backup lamp Page 48
Xenon illumination system
5 Selecting a filter Page 50
6 Manual selection of backup lamp Page 50
7 Opening the lamp module Page 50
8 Red segment is lit - backup lamp is in use Page 50
124 7653 8
MISU241

12 Functions at a glance
G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
S88 floor stand
1 Control panel page 176
2 Lamp housing for halogen illumination (xenon illumi-
nation)
page 80
3 Releasing the magnetic brakes of the suspension
system
Page 38
4 Limiting the suspension arm's downward movement Page 70
5 Removing/mounting the coupling for the surgical mi-
croscope
Page 54
6 Balance setting Page 68
7 Locking the stand in position Page 34
8 Locking the suspension arm in its horizontal position Page 38
9 Connecting a foot control panel or hand switch, con-
necting the remote control connector. Page 62
10 Rated voltage display Page 36
11 Connector panel Page 36
12 Switching on the suspension system Page 62
MISU241

G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
Functions at a glance 13
12 4356
7 4 8910,11,12
MISU241

14 Functions at a glance
G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
S8 ceiling mount
1 Locking the suspension arm in its horizontal position Page 36
2 Releasing the magnetic brakes of the suspension system Page 36
3 Balance setting Page 60
4 Lamp housing with halogen or xenon illumination Page 30
5 Control panel (rotatable through 180°) Page 66
6 Connecting a foot control panel or hand switch, con-
necting the remote control connector. Page 34
7 Switching on the suspension system Page 34
8 Releasing - moving - locking the lift arm Page 32
9 Removing/mounting the coupling for the surgical micro-
scope
Page 50
10 Setting the limit of downward travel Page 62
MISU241

G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
Functions at a glance 15
102798
15623 4
MISU241

16 Functions at a glance
G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
S81 ceiling mount
1 Locking the suspension arm in its horizontal position Page 34
2 Releasing the magnetic brakes of the suspension system Page 34
3 Balance setting Page 56
4 Lamp housing with halogen or xenon illumination Page 30
5 Control panel (rotatable through 180°) Page 62
6 Option: Hand control panel socket for ceiling track mount Page 32
7 Plugging in the remote control connector Page 32
8 Connecting the foot control panel or hand switch Page 32
9 Switching on the suspension system Page 32
10 Removing/mounting the coupling for the surgical micro-
scope
Page 48
11 Setting the limit of downward travel Page 58
MISU241

G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
Functions at a glance 17
10 112
9
456123 87
MISU241

18 Functions at a glance
G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
MISU241

G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
Safety 19
Safety
Directives and standards 20
Notes on installation and use 21
When using a fundus imaging system (e.g. BIOM 3) 25
Phototoxic retinal injury in eye surgery 25
Safety devices of the suspension systems 30
Warning labels and notes 38
MISU241

20 Safety
G-30-1530-en OPMI® VISU 210 on S8, S81, S88 Suspension Systems Issue 1.0
Printed on 19. 04. 2004
The instrument described in this manual has been developed and tested
in accordance with Carl Zeiss safety standards and with national and in-
ternational regulations. A high degree of instrument safety is thus en-
sured.
We would like to inform you on the safety aspects involved in operating
the instrument. This chapter contains a summary of the most important
precautions to be observed.
Further safety notes are also contained in other parts of this user's
manual; they are marked with a warning triangle containing an exclama-
tion mark as shown here. Please pay special attention to these safety
notes.
Safety is only ensured when this instrument is operated properly. Please
read through this manual carefully before turning the instrument on. Also
read through the user's manuals of the other equipment used with this in-
strument. You may obtain further information from our service organiza-
tion or authorized representatives.
Directives and standards
The system described in the user manual has been designed in compli-
ance with:
–EN
–IEC
–UL
– CSA
In accordance with Directive 93/42/EEC, Annex II, Article 3, the complete
quality management system of the company Carl Zeiss has been certified
by the DQS Deutsche Gesellschaft zur Zertifizierung von Management-
systemen mbH, a notified body, under registration number 250881 MP21.
• The instrument must be connected to a special emergency backup
line supply in accordance with the regulations or directives which ap-
ply in your country.
– As per Directive 93/42/EEC, the unit is a Class I instrument.
– For USA: FDA classification Class I.
• Please observe all applicable accident prevention regulations.
MISU241