Zeiss IOLMaster 700 User manual

For internal use only
ZEISS IOLMaster 700
Oine License Activation
Quick Guide

Oine License Activation allows an approved ZEISS representative to activate a license on an instrument or review software.
This feature should be used only when internet connectivity is not available on the instrument or review workstation.
• Access to FlexNet is required.
• Access to internet is required on a seperate laptop.
• An empty USB drive is required.
6. In the Licenses screen, under License Activation: Oine
Activation, enter the Activation ID from the electronic
entitlement certicate.
7. Click Create Request File. (Figure 3)
For internal use only
Course of Action
1. At the Log In screen, select Administrator. (Figure 1)
2. Enter Administrator Password, then click Log in. (Figure 1)
3. At the Patient screen, click Settings icon .
Figure 1
4. In the Settings screen, select the Licenses tab. (Figure 2)
5. Insert USB ash drive to an available USB port of the
IOLMaster 700.
Figure 2
Figure 3

For internal use only
8. Browse to USB ash drive from step 5 and click Save. Allow approx. 20 seconds for the le to save.
9. Remove the USB ash drive from the IOLMaster 700.
10. Connect the USB Flash Drive to a computer with internet access.
11. Login to Flexnet through the FlexNet webpage: http://activation.zeiss.com/exnet/operationsportal/logon.do
12. Select With Activation ID. (Figure 4)
13. Enter Activation ID and select Login (Figure 4).
15. Under Activatable Line Items, click Manual Activation. (Figure 6)
14. Under manage entitlements, select Activate. (Figure 5)
Figure 4
Figure 5
Figure 6

For internal use only
16. Select Choose File. (Figure 7)
17. Browse to the .XML activation le from Step 8.
18. Select Submit.
19. Select Save To File. (Figure 8)
20. Save the Response XML to the USB ash drive.
21. Remove the USB ash drive from the Licensing computer
and connect the USB ash drive to the IOLMaster 700.
22. In the Licenses screen, under License Activation:
Oine Activation, select Import… (Figure 9)
23. Browse to the USB ash drive from step 21 and select
responseXML.xml. Click on Select. (Figure 10)
Figure 7
Figure 8
Figure 9
Figure 10

For internal use only
24. The application prompt a message about the successful activation.
25. In the Settings screen, select “General Settings”, check the date and time for correctness and change them if
necessary. (Figure 11)
30. At the Patient screen, click Settings icon .
31. In the Settings screen, select the Licenses tab. (Figure 2)
32. Verify the License is available and Active. (Figure 13)
26. Click “X” icon and “Shut down” the device (Figure 12).
27. Switch ON the device by pushing the soft button.
28. At the Log In screen, select Administrator. (Figure 1)
29. Enter Administrator Password, then click Log in. (Figure 1)
Figure 11
Figure 13
Figure 12

EN_32_012_0017I Printed in Germany. CZ-VII/2018 International edition: Only for sale in selected countries. The contents of the brochure may dier from the current status of approval of the product or service oering in your country. Please contact our regional representatives for more information. Subject to changes in design and scope of delivery and due to ongoing technical development. IOLMaster is a registered trademark of Carl Zeiss Meditec AG or other companies of the ZEISS Group in Germany and/or other countries. © Carl Zeiss Meditec AG, 2018. All rights reserved.
Carl Zeiss Meditec AG
Goeschwitzer Strasse 51–52
07745 Jena
Germany
www.zeiss.com/iolmaster700
0297