Zeiss AxioExaminer FTP-2100 User manual

2021/12/18 19:41 1/12 Zeiss AxioExaminer FTP-2100 installation
Applied Scientific Instrumentation - https://asiimaging.com/docs/
Zeiss AxioExaminer FTP-2100 installation
Remove the top cover as shown & loosen the six screws noted with a 5 mm Allen wrench as shown.

Last update: 2021/09/23 17:15 zeiss_axioexaminer_ftp_install https://asiimaging.com/docs/zeiss_axioexaminer_ftp_install
https://asiimaging.com/docs/ Printed on 2021/12/18 19:41
Remove top of scope as shown & then used T25 wrench to remove four screws noted that secure
factory spacer

2021/12/18 19:41 3/12 Zeiss AxioExaminer FTP-2100 installation
Applied Scientific Instrumentation - https://asiimaging.com/docs/
Locate six screws & washers shown that attach spacer to microscope. Drop them in to the six
openings on the spacer block as shown. M6 x 35 mm

Last update: 2021/09/23 17:15 zeiss_axioexaminer_ftp_install https://asiimaging.com/docs/zeiss_axioexaminer_ftp_install
https://asiimaging.com/docs/ Printed on 2021/12/18 19:41

2021/12/18 19:41 5/12 Zeiss AxioExaminer FTP-2100 installation
Applied Scientific Instrumentation - https://asiimaging.com/docs/
Align spacer block with top of microscope as shown above, then flip top of microscope & microscope
as shown below.

Last update: 2021/09/23 17:15 zeiss_axioexaminer_ftp_install https://asiimaging.com/docs/zeiss_axioexaminer_ftp_install
https://asiimaging.com/docs/ Printed on 2021/12/18 19:41
Use original screws that secured short factory spacer & T25 wrench to secure longer spacer onto top
of microscope as shown in photos below.

2021/12/18 19:41 7/12 Zeiss AxioExaminer FTP-2100 installation
Applied Scientific Instrumentation - https://asiimaging.com/docs/

Last update: 2021/09/23 17:15 zeiss_axioexaminer_ftp_install https://asiimaging.com/docs/zeiss_axioexaminer_ftp_install
https://asiimaging.com/docs/ Printed on 2021/12/18 19:41
Set top of microscope with Spacer installed on top of microscope body & use 5 mm Allen wrench to
secure top of microscope & spacer to microscope body as shown below

2021/12/18 19:41 9/12 Zeiss AxioExaminer FTP-2100 installation
Applied Scientific Instrumentation - https://asiimaging.com/docs/
Use T25 wrench to remove small dovetail and use 3 mm wrench to remove stops and install these on
longer supplied dovetail as shown below

Last update: 2021/09/23 17:15 zeiss_axioexaminer_ftp_install https://asiimaging.com/docs/zeiss_axioexaminer_ftp_install
https://asiimaging.com/docs/ Printed on 2021/12/18 19:41

2021/12/18 19:41 11/12 Zeiss AxioExaminer FTP-2100 installation
Applied Scientific Instrumentation - https://asiimaging.com/docs/
Use the original screws with fresh blue lock tight to attach the longer dovetail as shown. Attach the
bottom screws first & insure the longer dovetail is aligned parallel to the bottom dovetail; this can be
done by using a straight edge
As shown in the photos below remove the condenser assembly from the microscope body, and install
the supplied cover in its place. Install the condenser assembly onto the condenser bracket as shown
and install the complete assembly onto the stage.

Last update: 2021/09/23 17:15 zeiss_axioexaminer_ftp_install https://asiimaging.com/docs/zeiss_axioexaminer_ftp_install
https://asiimaging.com/docs/ Printed on 2021/12/18 19:41
zeiss, axioexaminer, ftp, manual
From:
https://asiimaging.com/docs/ - Applied Scientific Instrumentation
Permanent link:
https://asiimaging.com/docs/zeiss_axioexaminer_ftp_install
Last update: 2021/09/23 17:15