Zeiss OPMI PRO magis User manual

OPMI®PRO magis
Surgical Microscope
Instructions for use
G-30-1292-en
Issue 3.0
Printed on 30. 07. 2001

G-30-1292-en OPMI® PRO magis Surgical Microscope Issue 3.0
Printed on 30. 07. 2001
Contents
Functions at a glance 5
– OPMI® PRO magis surgical microscope 6
– Key for symbols 7
Safety 9
– Directives and standards 10
– Notes on installation and use 11
– Warning labels and notes 14
Description 17
OPMI® PRO magis 18
– Intended use 18
– Controls, displays, connections 20
– Tiltable binocular tube and eyepieces 26
Preparations for use 31
Attaching the equipment 32
– Attaching the tube, eyepieces, objective lens and handgrips 32
Operation 35
Preparations for use 36
– Balancing the surgical microscope 36
– Adjusting the surgical microscope 41
– Checklist 42
Procedure 44
What to do in an emergency 45
– Failure of the zoom function 45
– Failure of the focusing function 46
– Failure of magnetic brakes 46
Maintenance / Further information 47
– Trouble-shooting table 48

G-30-1292-en OPMI® PRO magis Surgical Microscope Issue 3.0
Printed on 30. 07. 2001
– Care of the unit 50
– Sterilization 51
– Magnifications / Fields of view 52
– Ordering data 53
– Spare parts 54
– Accessories 55
– Technical data 56
– Ambient requirements 58
Index 59

G-30-1292-en OPMI® PRO magis Surgical Microscope Issue 3.0
Printed on 30. 07. 2001
Functions at a glance 5
Functions at a glance
OPMI® PRO magis surgical microscope 6
Key for symbols 7

6Functions at a glance
G-30-1292-en OPMI® PRO magis Surgical Microscope Issue 3.0
Printed on 30. 07. 2001
OPMI®PRO magis surgical microscope
1Setting the friction of the microscope's axis of rotation
2Setting the interpupillary distance
3Adjusting the eyecups
4Setting the prescription on the diopter scale
5Display of the zoom system's magnification factor
6Releasing the magnetic brakes (three keys each on the right and left)
7Adjusting the friction of the front-to-back tilt motion
8Balance setting of the front-to-back tilt of the microscope
9Setting the friction of the lateral tilt motion
10 Balance setting of the lateral tilt of the microscope
11 Connecting the light guide
12 Adjusting the illuminated field diameter
13 Moving to the starting position of the focusing range
14 Motorized focusing (left and right on handgrip)
15 Motorized zooming (left and right on handgrip)
151411 1310987
2
1
3
4
5
612

G-30-1292-en OPMI® PRO magis Surgical Microscope Issue 3.0
Printed on 30. 07. 2001
Functions at a glance 7
Key for symbols
Warning!
The warning triangle indicates potential sources of danger for per-
sons which may constitute a risk of injury for the user or a health ha-
zard.
Caution:
The square indicates situations which may lead to malfunction, de-
fects, collision or damage of the instrument.
Note:
The hand indicates hints for the use of the instrument or other tips for
the user.

8Functions at a glance
G-30-1292-en OPMI® PRO magis Surgical Microscope Issue 3.0
Printed on 30. 07. 2001

G-30-1292-en OPMI® PRO magis Surgical Microscope Issue 3.0
Printed on 30. 07. 2001
Safety 9
Safety
Directives and standards 10
Notes on installation and use 11
Warning labels and notes 14

10 Safety
G-30-1292-en OPMI® PRO magis Surgical Microscope Issue 3.0
Printed on 30. 07. 2001
The instrument described in this manual has been developed and tested
in accordance with Carl Zeiss safety standards and with national and in-
ternational regulations. A high degree of instrument safety is thus en-
sured.
We would like to inform you on the safety aspects involved in operating
the instrument. This chapter contains a summary of the most important
precautions to be observed.
Further safety notes are also contained in other parts of this user's
manual; they are marked with a warning triangle containing an exclama-
tion mark as shown here. Please pay special attention to these safety
notes.
Safety is only ensured when this instrument is operated properly. Please
read through this manual carefully before turning the instrument on. Also
read through the user's manuals of the other equipment used with this in-
strument. You may obtain further information from our service organiza-
tion or authorized representatives.
Directives and standards
The instrument described in this manual has been designed in compli-
ance with the following standards:
–EN
–IEC
–UL
–CSA
In accordance with Directive 93/42/EEC, Annex II, Article 3, the quality-
management system of Carl Zeiss has been approved by TÜV Rheinland,
which is a notified body. The registration number is: 95 102 7601.
• The instrument must be connected to a special emergency backup
line supply in accordance with the regulations or directives which ap-
ply in your country.
• This is a class I instrument as defined by Directive 93/42 /EEC.
• Please observe all applicable accident prevention regulations.