Zkteco Tl600 User manual

Installation GuideVersion: 2.0

Important NotesTable of ContentsPlease read this Installation Guide carefully and contact the Customer Care Service if you have any questions about the installation.To avoid any future service charges that can arise as a result of incorrect installation, it is recommended that installation can be performed by a professional technician prevent any potential service charges that can occur due to incorrect installation.We regularly revise the contents of this Installation Guide and update our products to enhance quality and performance without prior notice.1.2.3.You must perform the initialization process on each installation immediately after installing this lock on any door, as described in the initialization procedure on page 8.4.Do not install the batteries until the lock is installed.5.What's in the Box.............................................................................................................1Installation Diagram.......................................................................................................2Installation Procedure....................................................................................................21. Door Properties..........................................................................................................................................22. Drill Holes on the Door.............................................................................................................................4 3. Install Mortise and Cylinder ...................................................................................................................44. Install Spindle and Studs.........................................................................................................................55. Install the Outdoor Unit...........................................................................................................................56. Install Indoor Unit......................................................................................................................................67. Install Batteries and Cover......................................................................................................................78. Install Strike Plate and Box......................................................................................................................79. Physical Test.................................................................................................................................................8

1What's in the BoxDoor Thickness45 to 50 mm51 to 60 mmScrewNote:Spindles for door thickness from 45 to 60 mm are included in the standard package. To ensure proper lock operation, please use the speciﬁed spindle based on the thickness of your frame.Indoor UnitMortiseStrike Plate and BoxCylinderSpindle BKeysSpindle APlugScrew AScrew BScrew DScrew CMetal PinCardsScrew AScrew BSpindle CStudOutdoor Unit

Installation Diagram2Installation Procedure1Door PropertiesMeasure the Door ThicknessA.Measure the thickness of the door and select the appropriate Spindle length. For further details, please refer the table on Page 1.Check the Door Opening DirectionB.The position of the handle is determined by the opening direction of the door. Below is the graphical representation of the door opening direction in reference to your position outside the room.Outdoor UnitMetal PinKeysStudSpindle A/BStudCylinderScrew AScrew BStrike Plate and BoxMortiseDoorIndoor UnitBattery(not included)Screw CSpindle CMetal PinScrew DPlugBattery Cover

3Adjust the Direction of Latch (if needed)Push the reverse block in upward direction.Push the bolt of the latch into the mortise.1)2)MortiseStrikePlateMortiseMortiseStrikePlateMortiseStrikePlateStrikePlateUser LocationLeft InwardRight InwardLeft OutwardRight OutwardRotate the latch bolt to 180° inside the mortise, and release it.3)Change the Handle Direction (if needed)C.Remove the directional screw of the handle, rotate the handles of the outdoor and indoor units to 180 degrees in the left or right direction, depending on the door.1)Secure the handle again with the directional screw.2)

Place the installation template at the desired handle height.Mark the holes to be drilled and drill the marked locations.1)2)43Install Mortise and Cylinder Put the Mortise into the hole that was drilled, and secure the Mortise with Screw A. Insert the Cylinder into the Mortise (note the front sides and back sides) and secure it with Screw B.1)2)2Drill Holes on the DoorDesired handle height

Backset

Center line of handle

60mm

Screw AScrew B

54Install Spindle and StudsInsert the Spindle A/B into the clutch and insert the Metal Pin from the bottom of the clutch, force the pin apart and bend it to hold the Spindle A/B. Then, install the studs.1)2)Metal Pin5Install the Outdoor UnitPass the outdoor unit cable through the top of the cable hole.Pass the Spindle A through the hole of the clutch and the outdoor unit must be close to the entrance.1)2)StudRight Inward/OutwardLeft Inward/Outward

66Install Indoor UnitInsert the Metal pin on Spindle C.1)Connect the cable to the Indoor Unit port.2)Metal PinPlace the Indoor Unit appropriately on the Mounting Plate. Then use Screw C & Screw D to protect the Indoor Unit.3)Screw CScrew D

77Install Batteries and CoverMake sure that the Strike Box is aligned with the latch bolt. Then, use the installation template to drill the holes.1)Align the Strike Plate and Box with the holes drilled and protect them with Screw A.2)8Install Strike Plate and BoxInsert four Alkaline AA batteries and cover them with the battery cover, and insert the Plug.Screw A

89Physical TestTest the lock by rotating the handle and the double locking knob.A.The front handle can be rotated even when the door is closed, but the door remains unlocked.1)When the Security knob is turned on, the door remains unlocked even if the handle is rotated from indoor.2)Note:Test the lock by using the mechanical keyPress and rotate the cover of the key hole with your ﬁnger.1)Insert the Key into key hole and rotate 90°.2)PressNote: Please secure your keys for emergency purpose. If push handle downward, the lock close. It is installation problem, please refer to step 5 installation. 3)

Version: 2.0User Manual

Important Notes TL600 is an intelligent Smart Lock. If the lock is not installed properly, it may aﬀect the lifetime of the lock. We suggest to install the lock after furnishing. Please prefer a professional technician to install the lock as per our installation standard. To ensure your security, please check the box of keys when opening the product package.1.Please initialize the lock after installation and set the Administrator immediately to avoid others opening the door illegally.2.3.Please keep your Administrator information conﬁdential. 4.Please keep the mechanical keys in a separate place to avoid any criticality.5.To use the lock more eﬃciently, please refer the User Manual before using the lock. If you have any queries, please feel free to contact the Company's Client Service Center from any place or contact the Service Center headquarters.6.Please visit our company's website at anytime for our service information and regular updates of products.7.Table of ContentsProduct Overview...........................................................................................................1Denitions......................................................................................................................1How to Use......................................................................................................................21. Reset the Lock.............................................................................................................................................22. Activate the Lock.......................................................................................................................................2 3. Register the First Administrator............................................................................................................24. Programming the Features through Menu Mode...........................................................................3Quick Start......................................................................................................................4Unlock the Door with Fingerprint.............................................................................................................4Unlock the Door with Password.................................................................................................................4Unlock the Door with Card...........................................................................................................................4How to connect ZSmart APP?.........................................................................................5

1Product OverviewDefinitionsNote: Each user can register ten ﬁngerprints, one password, and one card.Initialization: All the registered user data will be deleted and restored to the factory settings.User Roles: The lock can be handled by two user roles namely Administrator and User. The Administrator has the privilege to access the menu and open the door. The user has the privilege to only open the door.Random Password: To protect the password, users may enter their password with random digits before or after the actual password. The maximum number of entered digits must be less than or equal to 30. For example: If the correct password is 123456, then the random password can be 89123456807, 1234562363, 389123456, etc.Backup Enrollment: After the ﬁrst registration, users can change the registered password and card, or continue to register the remaining ﬁngerprints.Always Open Mode: This function is to keep the door always unlocked, which is suitable for meeting rooms and places with no access restriction.Low Battery Warning: When the battery power is low, the lock will prompt “Low battery, please change!” after being turned on. If lower, the lock will prompt ”Low battery, shut down soon!”, users cannot access the Main Menu.Reset ButtonBatteryCompartmentsBattery CoverHandleSecurity KnobDouble LockingKnobKeypad & CardDetection AreaFingerprint SensorHandleMechanical Key HoleEmergence Power Interface

Double Locking: Double locking prevents the lock from being unlocked from the outside. Users can enable it by rotating the double locking knob.Security Mode: If the security knob is turned on, an intruder cannot unlock the indoor lock by breaking the Peephole. In addition, it is eﬀective to prevent your child wandering away from home.Emergency Mechanical Key: The mechanical key is used to open the door when the lock has electronic malfunction.How to Use22Emergency Charging: The bottom of the outdoor unit is provided with a Micro-USB interface. Use a power bank to charge the lock when it is out of power.Press and hold the Reset button for 5 seconds. The lock will beep for 5 times. Keepholding the Reset button until you hear the audio prompt, please press # key toconﬁrm.1Reset the Lock2Activate the LockTouch the keypad with the back of your hand or ﬁngers to activate the lock.Press and hold the Reset button for 5 seconds. The lock will beep for 5 times. Keepholding the Reset button until you hear the audio prompt, please press # key toconﬁrm.3Register the First AdministratorTouch the keypad to activate the lock.1)Press the # key thrice to start the administrator registration process. The user will hear a prompt “Please register administrator, please enter ﬁngerprint, password, access card, press star to exit”.2)Press the ﬁngerprint for ﬁve times, or enter the group password, or swipe the access card.3)Proceed further according to prompts.4)Quick Close Function: Push the handle of outdoor unit upward, the latches will pop-up to close door.

34Programming the Features through Menu ModeTouch the keypad to activate the lock.1)Press the # key thrice to access the menu.2)Verify the administrator's identity with his/her ﬁngerprint or card, or by entering the password then press the # key to conﬁrm.3)Enter the digit corresponding to the function to be performed by following the audio guide.4)Delete by NumberDelete by FingerprintDelete by PasswordDelete by CardCompletePassagewayAnti-prying DetectionRestore Factory SettingsNetwork SettingsLanguage Settings

4Note:The registered password can be of 6 to 12 digits.The currently logged-in administrator cannot delete his/her admin data.Please ignore Hotpot conﬁg and OTA function.1)2)3)Quick StartAttention: If the veriﬁcation is failed for ﬁve times, the lock will generate an alarm.Unlock the Door with FingerprintUnlock the Door with PasswordTouch the keypad to activate the lockPress the registered ﬁngerprint on the ﬁngerprint sensorRotate the handle down to openEnter the registered password and press the # key to conﬁrm Note: Users may enter random password to prevent any person from observing the password. The maximum length of random password is 30 digits.Unlock the Door with CardSwipe the registered card on the detection areaRotate the handle down to openRotate the handle down to open

5How to connect ZSmart APP?Step 1: Download the ZSmart App and register your Account Search the ZSmart App in Apple App Store or Google Play Store or scan the QR Code to download the App to your mobile phone /Tablet.Open the ZSmart App and log in with your account. If you do not have an account, create an account with your phone number or Email ID.Step 2: Add the Lock to the AppTap the "+" button on the top right corner of the interface and then select the "Smart Lock" option. Then select the purchased model and click the "Next Step" button.5

6Step 3: Add the Wi-Fi DetailsSelect the desired Wi-Fi and enter the Password. Then tap the “Conﬁrm” button.Note: The smart lock only works on 2.4GHz Wi-Fi networks.Step 4: Open Lock Smart Cong ModeAccess the lock’s menu, press >> 4 >> 4 >> 1 to open smart conﬁg mode.Step 5: Setup CompletionOnce you see the message “Added successfully” on the mobile app, you can edit the name of smart lock manually. Tap the “Done” button to complete the setup.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:IMPORTANT! Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Warning: FCC RF Radiation Exposure Statement:This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.

Table of contents