ZKTeco DL30B User manual

1
USER MANUAL
DL30B Digital Lock with Voice Guide Feature
Version: 1.3
Date: December 2018

Table of Contents
Read Before Use.........................................................................................................1
Important Notes .......................................................................................................................1
Structure........................................................................................................................................2
Basic Function ............................................................................................................3
Basic Information......................................................................................................................3
Initialization..................................................................................................................................4
Random Password...................................................................................................................4
Normal Open..............................................................................................................................5
Low Battery Alarm ...................................................................................................................5
Volume............................................................................................................................................5
9V External Battery ..................................................................................................................6
Emergency Mechanical Key..............................................................................................7
How to Use..................................................................................................................8
Register First Administrator................................................................................................8

Register another Administrator.......................................................................................9
Register Normal User..........................................................................................................10
Delete User Number ...........................................................................................................11
Delete Administrator Group (delete all the administrator).........................12
Delete Normal User Group (delete all the normal user) ...............................13
Supplemental Register ......................................................................................................14
Enable Normal Open ..........................................................................................................15
Volume setting........................................................................................................................16
Mute Function.........................................................................................................................17
Quick Start.................................................................................................................18
Open the Door with Password .....................................................................................18
Open the Door with Card ................................................................................................18

Page | 1
Important Notes
1. Factory setting of all new locks allows ANY verification to unlock them.
2. One administrator must be registered on newly installed locks. Ordinary users cannot
be registered until an administrator is registered.
3. The lock is equipped with a mechanical key. Store the mechanical key in a safe place.
4. Four alkaline AA batteries (not included) are required to power on the lock,
Non-alkaline and rechargeable batteries ARE NOT RECOMMENDED.
5. Do not remove batteries from the lock in working state.
6. Batteries should be replaced soon when the lock prompts the low battery warning.
7. If the lock does not have any activity for ten seconds it will go into sleep mode.
8. Go to bit.ly/dl30bov to watch our operation video.
Read Before Use

Page | 2
Structure
Front view Rear view Bottom view
1
Keypad Area
2
Card Detection Area
3
Keyhole
4
Handle
5
Battery Area
6
Reset Button
7
Battery Cover
8
9V Battery port
1
2
3
4
6
5
8
7

Page | 3
Basic Information
Group Verification Mode Function Capacity
Administrator
Card Register / Delete User,
Open The Door,
Access the menu
Max.100
Password Max.100
User
Card
Open the door
Max.100
Password Max.100
Note:
1. The maximum card/password capacity of lock is 100.
2. Password must be of six digits.
Basic Function

Page | 4
Initialization
After installing the lock, you must perform initialization process as explained below:
1. Press and hold the reset button, then touch the pad, keep holding the reset button
until you hear "Restore to default settings, wait a moment" voice prompt.
2. After 10 seconds the lock will prompt "Completed".
Random Password
To protect the password, user may enter their password with random digits before or
after, the maximum number of digits entered must be 32 or less.
For example:
If the correct password is 123456, the random password can be 89123456807,
1234562363, 389123456, etc.

Page | 5
Normal Open
Normal Open Mode keeps the door unlocked until a registered card, or password is
validated.
Low Battery Alarm
When the lock has a low battery a short beep and voice prompt of "Battery is low, please
replace" will be prompted".
Note: Access to operation steps is not allowed in low battery status.
Volume
Volume level can be set between muted and seven with a default level of three.

Page | 6
9V External Battery
9V external battery is used to open door when the lock is not operating through battery.
Note: The battery must be 9V alkaline battery (6LR61).

Page | 7
Emergency Mechanical Key
The mechanical key is used to open door when the lock has an electronic malfunction.
Note: Keep the mechanical key in a safe place.
Insert the key into key hole and rotate
90° in clockwise direction.

Page | 8
Register First Administrator
Note:
1. Verify card by swiping it over the detection area.
2. Password must be of six digits.
3. Default user number is of three digits,e.g. 001.
4. Press * to cancel the registration.
How to Use
Operating Steps
Touch the keypad to wake up the lock
Press 0 and # to access the menu
Enter additional verification
details for the same user
Press * to complete registration
and go back to previous step
Enter a six digits password twice, or swipe card.
Continue to register other identifications on the same user number
Enter a desired 3 digits user number, e.g. 001

Page | 9
Register another Administrator
Operating Steps
Enter additional verification
details for the same user Press *
to complete registration
and go back to previous step
Touch the keypad to wake up the lock
Press 0 and # to access the menu
Verify administrator using card, or enter password and
press # to confirm
Press 1 to register user
Press 1 to register administrator
Enter a desired 3 digits user number, e.g. 001
Enter a six digits password twice, or swipe card.

Page | 10
Register Normal User
Operating Steps
Enter additional verification
details for the same user Press *
to complete registration
and go back to previous step
Touch the keypad to wake up the lock
Press 0 and # to access the menu
Verify administrator using card, or enter password and
press # to confirm
Press 1 to register user
Press 2 to register administrator
Enter a desired 3 digits user number, e.g. 001
Enter a six digits password twice, or swipe card.

Page | 11
Delete User Number
Operating Steps
Touch the keypad to wake up the lock
Press 0 and # to access the menu
Verify administrator using card, or enter password and
press # to confirm
Press 2 to delete user
Press 1 to delete by user number
Enter 3 digits user number require to delete
Enter 3 digits user number require to delete again

Page | 12
Delete Administrator Group (delete all the administrator)
Note:
1. Press *to cancel the registration, if needed in the process of the registration.
Operating Steps
Touch the keypad to wake up the lock
Press 0 and # to access the menu
Verify administrator using card, or enter password and
press # to confirm
Press 2 to delete user
Press 2 to delete by group
Press
1
to delete administrator group
press # to confirm

Page | 13
Delete Normal User Group (delete all the normal user)
Note:
1. You can press * to cancel the registration and go back to previous menu.
Operating Steps
Touch the keypad to wake up the lock
Press 0 and # to access the menu
Verify administrator using card, or enter password and
press # to confirm
Press 2 to delete user
Press 2 to delete by group
Press
2
to delete normal user group
press
#
to confirm

Page | 14
Supplemental Register
(Register additional verification details for an existing user.)
Operating Steps
Enter additional verification
details for the same user Press *
to complete registration
and go back to previous step
Touch the keypad to wake up the lock
Press 0 and # to access the menu
Verify administrator using card, or enter password and
press # to confirm
Press 3 to do supplemental register
Enter a desired 3 digits user number, e.g. 001
Enter a six digits password twice, or swipe card.

Page | 15
Enable Normal Open
It will keep the door always in unlocked mode
Note:
1. To disable normal open, please use admin card / password to unlock the door.
2. When verifying administrator by password, press # to confirm.
Operating Steps
Touch the keypad to wake up the lock
Press 0 and # to access the menu
Verify administrator using card, or enter password and
press # to confirm
Press 4 to enable normal open

Page | 16
Volume setting
Note:
1. The "Beep" volume indicates the current volume level.
2. When verifying administrator by password, press # to confirm.
Operating Steps
Touch the keypad to wake up the lock
Press 0 and # to access the menu
Verify administrator using card, or enter password and
press # to confirm
Press0 and 1to enable volume setting
Decrease volume by pressing 1, and increase volume by
pressing 2, then press # to confirm

Page | 17
Mute Function
Note:
1. After enabling the mute function, no key tone will be heard.
2. To disable the mute function, touch the keypad to wake up the lock and
press 1 and #.
Operating Steps
Touch the keypad to wake up the lock
Press 1 and then # to enable mute function