Zodiac Pacer User manual

1

2
A BETTER LIFE
For over 100 years we have been motivated by innovation...
and innovation has inspired our greatest successes. Every day
we strive to supply the highest quality products... and constantly
seek to develop INNOVATIVE products.
Innovation, is what we create every day... for everyone...
for a better life: Because the pool is a source of PLEASURE and JOY...
a place to REUNITE FAMILIES... which CREATES RELATIONSHIPS
and memories... a place where time stands still. That’s the magic of a pool!
At Zodiac®, we manufacture more than just pool equipment... we create
A BETTER LIFE.
Zodiac®South Africa strives to offer world-class excellence in both
products and service. Complemented by a team of dedicated staff
throughout the country, we guarantee premium after sales services.
Should you require assistance on your Zodiac®product, need to locate
a dealer near you or just wish to nd out more information, call our
Customer Care Helpline on 0860 ZODIAC (0860 963 422) or go to
www.zodiac.co.za.
IMPORTANT INFORMATION
PLEASE READ THIS INFORMATION BEFORE
INSTALLATION. ALWAYS READ THE OWNER’S MANUAL
BEFORE USING THIS PRODUCT.
PLEASE SEND US YOUR WARRANTY CARD TO ENSURE
YOUR WARRANTY IS REGISTERED AND RETAIN YOUR
PROOF OF PURCHASE IN THE UNLIKELY EVENT OF
FUTURE WARRANTY CLAIMS.

3
INDEX
INTRODUCTION 5
SECTION 1 – INSTALLATION 6
Preparing your pool and ltration system 6
Assembling your PACER™ 6
Assembling the Hoses 7
SECTION 2 – CORRECT SETTINGS 8
Adjustment Suggestions: Auto Weir Valve 8
Correct balancing 9
Pool coverage 10
SECTION 3 – REMOVAL AND REFITTING OF
THE DIAPHRAGM 10
AIB (Adjustable Inner Body) – Explanation 10
Procedure to remove Diaphragm 10
Procedure to ret/reset Diaphragm 11
SECTION 4 – HOW TO KEEP YOUR PACER™ OPERATING
EFFICIENTLY 12
SECTION 5 – PROBLEM SOLVING 13
SECTION 6 – PARTS IDENTIFICATION 15
Exploded diagram – PACER™ 15
SECTION 7 – OPTIONAL ACCESSORIES 16
SECTION 8 - THE PERFECT PARTNER FOR YOUR PACER™17
SECTION 9 – GETTING TO KNOW YOU BETTER 18
SECTION 10 – AT YOUR SERVICE 19

4
IMPORTANT INFORMATION
WARNING
RISK OF SUCTION HAZARD, WHICH IF NOT AVOIDED, CAN
RESULT IN SERIOUS INJURY OR DEATH.
READ THIS MANUAL IN ITS ENTIRETY BEFORE INSTALLING AND
OPERATING THE CLEANER.
Do not block the suction ttings in the pool, the suction opening on the
cleaner or the cleaner hoses with any part of your body. Do not expose
your hair, loose clothing, jewellery, etc. to any suction outlet ttings in the
pool/spa or on the cleaner.
• Clean the weir basket, pump basket and pool lter before installing
the cleaner and on a regular basis thereafter.
• Always disconnect the cleaner from the weir before cleaning or
backwashing the pool lter. After cleaning or backwashing, let the
ltration system run for at least ve (5) minutes before re-connecting
the cleaner.
• Remove the cleaner from the pool before chemical or shock
treatments. Wait a minimum of four (4) hours after super
chlorination before re-installing the cleaner.
Read owner’s manual completely before operating the cleaner.
Do not operate outside of the pool.
Do not let children play with cleaner.

5
INTRODUCTION
Dear Customer,
Thank you for purchasing a PACER™. It is through customers such as you that
our position as worldwide market leader in poolcare remains unchallenged.
• Your PACER™ features a lightweight, streamlined counterweight assembly
which improves speed and manoeuvrability.
• Your PACER™ has no moving parts to jam, wear, or come adrift. No nuts,
bolts,screws, gears or wheels to corrode.
• Its Innovative Long Life Diaphragm System sucks up dirt, debris, bugs, leaves,
and even pebbles.
• The Adjustable Inner Body (AIB), increases efciency and makes Diaphragm
maintenance quick and easy.
• The ingenious Deector Wheel virtually eliminates cleaning problems caused
by severe angles and pool steps.
• Your PACER™ will quickly and quietly clean any average pool.
• In the event of requiring under-warranty repairs, please take your PACER™
to your closest pool shop or alternatively please phone our Customer Care
Helpline 0860 Zodiac®(0860 963 422) and we will direct you to the Zodiac®
warranty agent nearest to you.
IT’S EASY TO INSTALL. JUST READ THE INSTRUCTIONS IN THE MANUAL
CAREFULLY.
PACER™ is a Trade Mark of Zodiac®Pool Care South Africa (Pty) Ltd.
Specications and equipment subject to change without prior notice.
HE AD ONLY
• PACER™ Pool Cleaner
• 36 Fin Disc
• Twist Lock Hose Adaptor
• Deector Wheel
• Warranty Card
• Quick Start guide
COMBI PACK ONLY
• PACER™ Pool Cleaner
• Auto Weir Valve with 90˚ Elbow
• 6 x1.2m Twist Lock Hose Lengths
• 36 Fin Disc
• Deector Wheel
• C-Clip
• Warranty Card
• Quick Start Guide

6
PREPARING YOUR POOL AND FILTRATION SYSTEM
IMPORTANT
The ltration system must be operating at its maximum water ow before you install
your PACER™, otherwise you will have to re-adjust it after cleaning the pool lter.
Installation is easy if you follow these simple preliminary steps:
1. Empty the weir basket.
2. Clean the pump basket.
3. Backwash the lter until the sight glass is clear.
4. Adjust all return jets (whether your pool has one, two, or more) to point
downwards and towards each other so that you DO NOT see a circular water ow
or ripples on the surface of your pool.
ASSEMBLING YOUR PACER™
1. Fit the disc over the Flexi-foot (base) of your machine, with the top of the disc
(marked TOP) facing towards the machine. (see Diagram 1)
2. Position disc underneath the Stop Block (A) then position under the disc Retaining
Lug (B). (see Diagram 2)
3. Ensure that the disc rotates freely around the Flexi-foot once it has been tted.
SECTION 1 – INSTALLATION
Diagram 2: Fitting the disc.
Position underneath Retaining lug.
Diagram 3
Diagram 1 : Fitting the disc.
4. Every PACER™ Pool Cleaner is supplied with a Medium
Deector Wheel. The purpose of this wheel is to protect
the Outer Extension Pipe and Main Body and also to
guide the PACER™ away from swimming pool steps
or stairs. Position the Deector Wheel on the
Outer Extension Pipe as in Diagram 3. Then push
down rmly on the Deector Wheel, the Deector
Wheel will click into place. Make sure the top clips
are seated in the groove. Ensure that the Deector
Wheel rotates freely.

7
ASSEMBLING THE HOSES (COMBI)
1. Always insert the male hose cuff into the
female cuff and twist until they lock together.
Hoses must connect fairly tightly. The best
setting on the ratchet system is setting 1 or 2.
The ideal length of hose is from the weir to the
farthest point of the pool plus one extra section
of hose. If the weir is opposite the steps, use lowest
step as farthest point (see Diagram 4). To ensure
the best performance from your PACER™, please
ensure that only genuine Zodiac®Twist Lock Hoses are used.
2. Fit the Hose Weight to the rst section of the hose ±1 metre from the PACER™
Head. (Refer to Section 2, on page 9 for correct settings)
3. Bleed all the air from the hose by placing one end over the return jet – thus lling
the hose length with water.
4. Keeping the hose-ends underwater, move the hose from the return line to the weir
and connect the female cuff directly to the Auto Weir Valve 90˚ Elbow.
5. Ensure that the Auto Weir Valve is rmly attached to the weir vacuum lid.
(PACER HEAD ONLY)
Your Pacer head is compatible with both Standard and Twist Lock hoses. Use the
Twist Lock hose adaptor (See section 6) when using Twist Lock hoses.
SECTION 1 – INSTALLATION
Weir
Weir

8
SECTION 2 – CORRECT SETTINGS
ADJUSTMENT SETTINGS
You will only need to adjust the Auto Weir Valve if the following occurs:
AUTO WEIR VALVE
The Zodiac®Auto Weir Valve is preset at the factory to

However, if you do experience difculties, it can
be manually adjusted to one of the three settings (high, medium or low –
See Adjustment Suggestions below).
NOTE: To obtain maximun
Diaphragm efficiency, please
ensure a genuine Zodiac
Auto Weir Valve is used.
®
NOTE: To obtain maximum
Diaphragm efciency, please
ensure a genuine Zodiac®
Auto Weir Valve
with 90˚ Elbow
You no longer
need to remove
the ZODIAC
Auto Weir Valve
from the weir.
Simply depress the red pivoted arm (A), until it
locks open the flow door.
To recommence pool cleaner operation, release the
pivoted arm (A) by pressing down on the flow door
(B). It’s that simple!
TURNING YOUR PACER™ OFF IS MADE EASY
WITH THE AUTO WEIR VALVE
3
2
1
1. Low Setting 2. Medium Setting 3. High Setting
This end plugs
into the weir
Hose or 90˚
Elbow attaches to
this end
21
Water Flow
Your PACER™ Pool Cleaner
is performing too fast and/or
climbing above the level of
the water.
Reduce Auto Weir Valve to
medium(2) or low(1)
setting
Your PACER™ Pool Cleaner
is performing slowly and/or
not climbing the pool walls.
Increase Auto Weir Valve to
medium(2) or high(3)
setting

9
SECTION 2 – CORRECT SETTINGS
ADJUSTMENT SUGGESTIONS
CORRECT BALANCING
Proper balancing must be accomplished in the deepest area of the pool
(Diagram 6). The buoyancy of the hose tends to lift the PACER™, espe-
cially in deeper water. The Hose Weight is provided to help neutralise
the buoyant effect of the hose.
POOL COVERAGE
Normally it is undesirable for the return line water flow to affect the natu-
ral movement of your Zodiac®Hose. However, the return line pressure
can be used to balance cleaning coverage or to guide the cleaner away
from steps and corners.
A return line located anywhere along the shaded area can be utilised to
gently push the hose, allowing your PACER™ to free itself from in-pool
obstacles (Diagram 7).
Incorrect IncorrectCorrect
Diagram 7
Diagram 6

10
SECTION 3 – REMOVAL AND REFITTING
OF THE DIAPHRAGM
ADJUSTABLE INNER BODY (AIB)
The technologically Advanced AIB incorporated
into your new PACER™ makes it quick and simple
for you to:
• Remove debris from the Diaphragm
and Inner Extension Pipe.
• Reset the Diaphragm.
• Replace the Diaphragm.
• Inspect the Outer Extension Pipe
Swivel, to ensure that it is turning freely.
PLEASE READ AND FOLLOW THE
INSTRUCTIONS CAREFULLY


• Separate pool cleaner from hose.
• Loosen Hand-nut one and a half turns
anti-clockwise (Diagram 8a).
• Grasp Diaphragm lip at edge of suction
hole and pull. The Inner Extension Pipe and
Diaphragm will be released in one piece
(Diagram 8b).
• Pull Diaphragm off the Inner Extension Pipe.
• If there is a blockage, carefully remove it. Do
not use any sharp objects as this may damage
the Diaphragm.
• Inspect Diaphragm closely for perforations
or cracks.
• Even small holes will compromise its operation.
If the Diaphragm is damaged in any way,
replace before retting.
Diagram 8
8a
8b