Zte Blade A72 5G User manual

Quick Start Guide
Quick Start Guide

1
Quick Start Guide (en)……………………….……2
Guía de inicio rápido (es) ……………..…………14
Guia de início rápido (pt) ………….…………….27
Guida rapida all'uso (it) …………….…………….40

2
ZTE Blade A72 5G
Quick Start Guide

3
LEGAL INFORMATION
Copyright © 2022 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted, reproduced,
translated or used in any form or by any means,
electronic or mechanical, including photocopying and
microfilm, without the prior written permission of ZTE
Corporation.
Notice
ZTE Corporation reserves the right to make
modifications on print errors or update specifications in
this guide without prior notice.
We offer self-service for our smart terminal device users.
Please visit the ZTE official website (at
https://ztedevices.com) for more information on user
manual, self-service and supported product models.
Information on the website takes precedence.
Disclaimer
ZTE Corporation expressly disclaims any liability for
faults and damages caused by unauthorized
modifications of the software.
Images and screenshots used in this guide may differ
from the actual product. Content in this guide may differ
from the actual product or software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE
Corporation.
Android™ is a trademark of Google LLC.
The Bluetooth®word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by ZTE Corporation is under license.
microSDXC Logo is a trademark of SD-3C,
LLC.
Other trademarks and trade names are those of their
respective owners.

4
Getting to Know Your Phone
Your phone supports 2.4 GHz and 5 GHz Wi-Fi.
Front camera
Touch screen
Earpiece
Volume ke
y
Power key/
Fingerprint
sensor
Charging/USB
Type-C jack
Headset jack
Back cameras
and flash
Speaker
Indicator light
nano-SIM/
microSDXC
card tray
Proximity &
light sensor
NFC area

5
Setting Up Your Phone
The nano-SIM card(s) can be installed or removed while
the phone is turned on.
WARNING!
To avoid damage to the phone, do not use any other kind
of SIM cards, or any non-standard nano-SIM card cut
from a SIM card. You can get a standard nano-SIM card
from your service provider.
1. Insert the tip of the tray eject tool into the hole on the
card tray.
CAUTION:
Never replace the included tray eject tool with sharp
objects. Ensure that the tray eject tool is perpendicular to
the hole. Otherwise, the phone may be damaged.
2. Pull out the card tray. You can place a nano-SIM
card on the right card slot, and place a nano-SIM
card or a microSDXC card (optional) on the left card
slot, as shown. Carefully slide the tray back into
place.

6
NOTE:
The two card slots support 5G/4G/3G/2G networks.
Charging the Phone
Your phone’s battery should have enough power for the
phone to turn on, find a signal, and make a few calls. You
should fully charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and USB Type-C
cables. The use of unapproved accessories could
damage your phone or cause the battery to explode.
WARNING!
Do not remove the back cover. The battery is not
removable. Removal may cause fire or explosion.
1. Connect the adapter to the charging jack.
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully
charged.
NOTE:
If the battery is extremely low, you may be unable to
power on the phone even when it is being charged. In
this case, try again after charging the phone for at least
20 minutes. Contact the customer service if you still
cannot power on the phone after prolonged charging.

7
Powering On/Off Your Phone
Make sure the battery is charged before powering on.
Press and hold the Power key to turn on your
phone.
To power off, press and hold the Power key to open
the options menu, and touch >.
NOTE:
If the screen freezes or takes too long to respond, try
pressing and holding the Power key for over 10 seconds
to restart the phone.
Waking Up Your Phone
Your phone automatically goes into sleep mode when it
is not in use for some time. The display is turned off to
save power and the keys are locked to prevent
accidental operations.
You can wake up your phone by turning on the display
and unlocking the keys.
1. Press the Power key to turn the screen on.
2. Swipe up on the screen.
NOTE:
If you have set a face verification, a fingerprint, an unlock
pattern, a PIN or a password for your phone, you’ll need
to use your face or fingerprint, draw the pattern, or enter
the PIN/password to unlock your screen.

8
Product Safety Information
Don’t make or receive phone calls while
driving. Never text while driving.
Keep your phone at least 10 mm away from
your body while making calls.
Small parts may cause choking.
Your phone can produce a loud sound.
To prevent possible hearing damage, do not
listen at high volume levels for long periods.
Exercise caution when holding your phone
near your ear while the loudspeaker is in use.
Avoid contact with anything magnetic.
Keep away from pacemakers and other
electronic medical devices.
Turn off when asked to in hospitals and
medical facilities.
Turn off when told to on aircraft and at airports.
Turn off when near explosive materials or
liquids.
Don’t use at gas stations.
Your phone may produce a bright or flashing
light.
Don’t dispose of your phone in fire.
Avoid extreme temperatures.
Avoid contact with liquids. Keep your phone
dry.
Do not attempt to disassemble your phone.

9
Only use approved accessories.
For pluggable equipment, the socket-outlet
shall be installed near the equipment and shall
be easily accessible.
Don’t rely on your phone as a primary device
for emergency communications.
Specific Absorption Rate
Your mobile device is a radio transmitter and receiver. It
is designed not to exceed the limits for exposure to radio
waves recommended by international guidelines. These
guidelines were developed by the independent scientific
organization ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known as
Specific Absorption Rate, or SAR. The SAR limit for
mobile devices is 2 W/kg and the highest SAR value for
this device when tested at the head was 1.471 W/kg*,
and when tested at the body was 1.340 W/kg* with 5 mm
distance. As mobile devices offer a range of functions,
they can be used in other positions, such as on the body
as described in the user manual**.
As SAR is measured utilizing the device’s highest
transmitting power, the actual SAR of this device while
operating is typically below that indicated above. This is
due to automatic changes to the power level of the
device to ensure it only uses the minimum power
required to communicate with the network.
* The tests are carried out in accordance with EN 50360,
EN 50566, EN 50663, EN 62209-1 and EN 62209-2.
** Please see body worn operation in the user manual.

10
Specification
EUT tested
radios
application
GSM 900/1800
WCDMA Band 1,8
FDD LTE Band 1,3,7,8,20,28
TDD LTE Band 38
5G NR Band N1,3,28,78
802.11a/b/g/n/ac
Bluetooth V5.0+BR/EDR/LE
NFC
GPS
WCDMA Version Rel.9
LTE Version Rel.15
Maximum RF
output power
GSM900: 32.5 dBm
GSM1800: 30.5 dBm
WCDMA Band 1: 23.5 dBm
WCDMA Band 8: 23.5 dBm
FDD LTE Band 1: 23.5 dBm
FDD LTE Band 3: 23.5 dBm
FDD LTE Band 7: 23.5 dBm
FDD LTE Band 8: 23.5 dBm
FDD LTE Band 20: 23.5 dBm
FDD LTE Band 28: 23.5 dBm
TDD LTE Band 38: 23.5 dBm
5G NR Band N1: 23 dBm
5G NR Band N3: 23 dBm
5G NR Band N28: 23 dBm
5G NR Band N78: 26 dBm
802.11b/g/n: 18 dBm
802.11a/n/ac: 18 dBm
Bluetooth BR/EDR: 11 dBm
Bluetooth LE: 8.5 dBm
NFC: -7.7 dBμA/m@10m
GPS (RX Only)

11
CE Caution
Battery Caution
There is a risk of explosion if battery is replaced by
an incorrect type.
Dispose of used batteries according to the
instructions.
Do not dispose of a battery into fire or a hot oven, or
mechanically crush or cut a battery. Doing so can
result in an explosion.
Leaving a battery in an extremely high temperature
surrounding environment can result in an explosion
or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure
may result in an explosion or the leakage of
flammable liquid or gas.
USB Port
This product shall only be connected to a USB interface
of version USB 2.0.
Proper Use
As described in this guide, your device can be used only
in right location. If possible, please do not touch the
antenna area on your device.
Do not expose your device to extreme temperatures
lower than -10 °C and higher than +45 °C.

12
Disposal of Your Old Appliance
1. When this crossed-out wheeled bin
symbol is attached to a product, it
means the product is covered by the
European Directive 2012/19/EU.
2. All electrical and electronic products
should be disposed of separately from
the municipal waste stream via
designated collection facilities
appointed by the government or the
local authorities.
3. The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
For this product’s recycling information based on WEEE
directive, please send an e-mail to [email protected]

13
EU DECLARATION OF CONFORMITY
Hereby, ZTE Corporation declares that the radio
equipment type ZTE 7540N is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following Internet address:
https://certification.ztedevices.com
The device is restricted to indoor use only when
operating in the 5150 to 5250 MHz frequency range.
AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK(NI)
ErP Conformity
The external power supply of this product conforms to
the Energy-related Product Directive (ErP) 2009/125/EC
of the European Parliament and the Council.
The detailed ErP information is available on ZTE website
https://certification.ztedevices.com.

14
ZTE Blade A72 5G
Guía de inicio rápido

15
INFORMACIÓN LEGAL
Copyright © 2022 ZTE CORPORATION.
Todos los derechos reservados.
No se permite citar, reproducir, traducir ni utilizar ninguna
parte de este manual en forma alguna o a través de
cualquier medio, ya sea electrónico o mecánico,
incluyendo fotocopia o microfilm, sin tener el
consentimiento previo por escrito de ZTE Corporation.
Aviso
ZTE Corporation se reserva el derecho a rectificar los
errores de impresión, así como el derecho a actualizar
las especificaciones de esta guía sin previo aviso.
Brindamos autoservicio a los usuarios de nuestros
dispositivos terminales inteligentes. Para obtener más
información sobre el manual de usuario, el autoservicio y
los modelos de productos compatibles, visite el sitio
oficial de ZTE (en https://ztedevices.com). La
información del sitio web tiene prioridad.
Exención de responsabilidad
ZTE Corporation renuncia a toda responsabilidad por
cualquier daño derivado de la modificación no autorizada
del software.
Las imágenes y las capturas de pantalla utilizadas en
esta guía pueden ser diferentes del producto real. El
contenido de esta guía puede ser diferente del producto
o software real.
Marcas registradas
ZTE y los logotipos de ZTE son marcas registradas de
ZTE Corporation.
Android™ es una marca registrada de Google LLC.
La marca comercial Bluetooth®y los logotipos son
marcas comerciales registradas propiedad de Bluetooth
SIG, Inc. y ZTE Corporation los utiliza bajo licencia.
El logotipo de microSDXC es una marca
comercial de SD-3C, LLC.
Otras marcas y nombres comerciales pertenecen a sus
respectivos propietarios.

16
Conozca su teléfono
Su teléfono admite Wi-Fi de 2,4 GHz y 5 GHz.
Cámara frontal
Pantalla táctil
A
uricular
Tecla de
volumen
Tecla de
encendido/
Sensor de
huellas
dactilares
Toma de carga/
USB tipo C
Conector para
auriculares
Cámara y flash
traseros
A
ltavoz
Luz del indicador
Bandeja de
tarjeta nano-
SIM/microSDXC
Sensor de luz
y proximidad
Á
rea de NFC

17
Configuración del teléfono
Puede instalar o extraer la(s) tarjeta(s) nano-SIM del
teléfono sin necesidad de apagarlo.
ADVERTENCIA
Para no dañar el teléfono, no utilice ningún otro tipo de
tarjeta SIM ni ninguna otra tarjeta nano-SIM no estándar
recortada de una tarjeta SIM. Su proveedor de servicios
puede proporcionarle una tarjeta nano-SIM estándar.
1. Inserte el extremo del instrumento para extraer la
tarjeta en la ranura de la bandeja de la tarjeta.
PRECAUCIÓN:
Nunca utilice objetos afilados en lugar de la herramienta
de expulsión de la bandeja incluida. Asegúrese de
colocar la herramienta en posición perpendicular
respecto al orificio. De lo contrario, el teléfono podría
sufrir daños.
2. Deslice la bandeja de la tarjeta hacia fuera. Puede
colocar una tarjeta nano-SIM en la ranura de la
derecha y una tarjeta nano-SIM o microSDXC
(opcional) en la ranura de la izquierda, tal y como se
muestra. Vuelva a introducir la bandeja con cuidado
en su lugar.

18
NOTA:
Las dos ranuras de tarjeta son compatibles con redes
5G/4G/3G/2G.
Carga del teléfono
La batería del teléfono debe contar con suficiente carga
para que el teléfono pueda encenderse, detectar una
señal y realizar algunas llamadas. Debe cargarla por
completo tan pronto como sea posible.
ADVERTENCIA
Utilice únicamente cargadores y cables USB tipo C que
cuenten con la aprobación de ZTE. Si utiliza accesorios
sin aprobar podrían producirse daños en el teléfono o
podría provocar la explosión de la batería.
ADVERTENCIA
No retire la cubierta trasera. La batería no es
extraíble. La extracción de la batería podría provocar
un incendio o una explosión.