Zte Blade A72 User manual

Quick Start Guide
Quick Start Guide

1
Quick Start Guide (en)…………………….………2
Kurzanleitung (de)…………………………………15
Ghid rapid (ro) …………………..………….…….28
Vodičza brzi početak (sr) …….….……..……….41
Skrócona instrukcja obsługi (pl) ……..…………54
Kratke upute (hr) .....…....….….….….……….….67
Οδηγός γρήγορης εκκίνησης (el) ……….………80
Rövid üzembe helyezési útmutató (hu) …..……93
Stručný návod na obsluhu (sk) ……..…….……106
Stručný návod k použití (cs) …….…….………119
Ръководство за бърз старт (bg) ….…….……132
Краток водич за користење (mk) ……………145
Priročnik za hitro nastavitev (sl) ….….….……158
Vodičza brzi početak (bs) ………….………….171

2
ZTE Blade A72
Quick Start Guide

3
LEGAL INFORMATION
Copyright © 2022 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted, reproduced,
translated or used in any form or by any means,
electronic or mechanical, including photocopying and
microfilm, without the prior written permission of ZTE
Corporation.
Notice
ZTE Corporation reserves the right to make
modifications on print errors or update specifications in
this guide without prior notice.
We offer self-service for our smart terminal device users.
Please visit the ZTE official website (at
www.ztedevices.com) for more information on user
manual, self-service and supported product models.
Information on the website takes precedence.
Disclaimer
ZTE Corporation expressly disclaims any liability for
faults and damages caused by unauthorized
modifications of the software.
Images and screenshots used in this guide may differ
from the actual product. Content in this guide may differ
from the actual product or software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE
Corporation.
Android™ is a trademark of Google LLC.
The Bluetooth®word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any
use of such marks by ZTE Corporation is under license.
microSDXC Logo is a trademark of SD-3C,
LLC.
Other trademarks and trade names are those of their
respective owners.

4
Getting to Know Your Phone
Your phone supports 2.4 GHz and 5 GHz Wi-Fi.
Front camera
Touch screen
Earpiece
Volume ke
y
Power key/
Fingerprint
sensor
Charging/USB
Type-C jack
Headset jack
Back cameras
and flash
Speaker
Indicator light
nano-SIM/
microSDXC
card tray
Proximity &
light sensor

5
Setting Up Your Phone
The nano-SIM card(s) can be installed or removed while
the phone is turned on.
WARNING!
To avoid damage to the phone, do not use any other kind
of SIM cards, or any non-standard nano-SIM card cut
from a SIM card. You can get a standard nano-SIM card
from your service provider.
1. Insert the tip of the tray eject tool into the hole on the
card tray.
NOTE:
Please use the tray eject tool included in the box.
Otherwise the card tray may not be ejected.
CAUTION:
Never replace the included tray eject tool with sharp
objects. Ensure that the tray eject tool is perpendicular to
the hole. Otherwise, the phone may be damaged.

6
2. Pull out the card tray. You can place the nano-SIM
cards on the right and middle card slots, and place a
microSDXC card (optional) on the left card slot, as
shown. Carefully slide the tray back into place.
NOTE:
If two nano-SIM cards are installed, both cards can
connect to the 4G, 3G, or 2G network, and either card
can be used for mobile data.
Charging the Phone
Your phone’s battery should have enough power for the
phone to turn on, find a signal, and make a few calls. You
should fully charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and USB Type-C
cables. The use of unapproved accessories could
damage your phone or cause the battery to explode.
WARNING!
Do not remove the back cover. The battery is not
removable. Removal may cause fire or explosion.

7
1. Connect the adapter to the charging jack.
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully
charged.
NOTE:
If the battery is extremely low, you may be unable to
power on the phone even when it is being charged. In
this case, try again after charging the phone for at least
20 minutes. Contact the customer service if you still
cannot power on the phone after prolonged charging.
Powering On/Off Your Phone
Make sure the battery is charged before powering on.
Press and hold the Power key to turn on your
phone.
To power off, press and hold the Power key to open
the options menu, and touch >.
NOTE:
If the screen freezes or takes too long to respond, try
pressing and holding the Power key for over 10 seconds
to restart the phone.
Waking Up Your Phone
Your phone automatically goes into sleep mode when it
is not in use for some time. The display is turned off to
save power and the keys are locked to prevent
accidental operations.

8
You can wake up your phone by turning on the display
and unlocking the keys.
1. Press the Power key to turn the screen on.
2. Swipe up on the screen.
NOTE:
If you have set a face verification, a fingerprint, an unlock
pattern, a PIN or a password for your phone, you’ll need
to use your face or fingerprint, draw the pattern, or enter
the PIN/password to unlock your screen.

9
Product Safety Information
Don’t make or receive phone calls while
driving. Never text while driving.
Keep your phone at least 5 mm away from
your body while making calls.
Small parts may cause choking.
Your phone can produce a loud sound.
To prevent possible hearing damage, do not
listen at high volume levels for long periods.
Exercise caution when holding your phone
near your ear while the loudspeaker is in use.
Avoid contact with anything magnetic.
Keep away from pacemakers and other
electronic medical devices.
Turn off when asked to in hospitals and
medical facilities.
Turn off when told to on aircraft and at airports.
Turn off when near explosive materials or
liquids.
Don’t use at gas stations.
Your phone may produce a bright or flashing
light.
Don’t dispose of your phone in fire.
Avoid extreme temperatures.
Avoid contact with liquids. Keep your phone
dry.
Do not attempt to disassemble your phone.

10
Only use approved accessories.
For pluggable equipment, the socket-outlet
shall be installed near the equipment and shall
be easily accessible.
Don’t rely on your phone as a primary device
for emergency communications.
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and receiver. It
is designed not to exceed the limits for exposure to radio
waves recommended by international guidelines. These
guidelines were developed by the independent scientific
organization ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known as
Specific Absorption Rate, or SAR. The SAR limit for
mobile devices is 2 W/kg and the highest SAR value for
this device when tested at the head was 0.902 W/kg*,
and when tested at the body was 1.488 W/kg* with 5 mm
distance. As mobile devices offer a range of functions,
they can be used in other positions, such as on the body
as described in the user manual**.
As SAR is measured utilizing the device’s highest
transmitting power, the actual SAR of this device while
operating is typically below that indicated above. This is
due to automatic changes to the power level of the
device to ensure it only uses the minimum power
required to communicate with the network.
* The tests are carried out in accordance with EN 50360,
EN 50566, EN 50663, EN 62209-1 and EN 62209-2.
** Please see body worn operation in the user manual.

11
Specification
EUT tested
radios
application
GSM 850/900/1800/1900
WCDMA Band1/2/5/8
LTE Band 1/3/5/7/8/20/38
Bluetooth / 2.4G Wi-Fi / 5G Wi-Fi /
FM / GPS / GLONASS
Maximum RF
output power
GSM850: 33.6 dBm
GSM900: 34.0 dBm
GSM1800: 30.5 dBm
GSM1900: 30.4 dBm
WCDMA Band 1: 23.0 dBm
WCDMA Band 2: 23.0 dBm
WCDMA Band 5: 24.8 dBm
WCDMA Band 8: 24.4 dBm
LTE Band 1: 23.0 dBm
LTE Band 3: 23.5 dBm
LTE Band 5: 24.8 dBm
LTE Band 7: 23.0 dBm
LTE Band 8: 25.0 dBm
LTE Band 20: 25.0 dBm
LTE Band 38: 24.3 dBm
Bluetooth: EIRP 9.58 dBm
2.4G Wi-Fi: EIRP 19.18 dBm
5G Wi-Fi B1: EIRP 20.04 dBm
5G Wi-Fi B4: EIRP 13.94 dBm

12
CE Caution
Battery Caution
There is a risk of explosion if battery is replaced by
an incorrect type.
Dispose of used batteries according to the
instructions.
Do not dispose of a battery into fire or a hot oven, or
mechanically crush or cut a battery. Doing so can
result in an explosion.
Leaving a battery in an extremely high temperature
surrounding environment can result in an explosion
or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure
may result in an explosion or the leakage of
flammable liquid or gas.
USB Port
This product shall only be connected to a USB interface
of version USB 2.0.
Proper Use
As described in this guide, your device can be used only
in right location. If possible, please do not touch the
antenna area on your device.
Do not expose your device to extreme temperatures
lower than -10 °C and higher than +35 °C.

13
Disposal of Your Old Appliance
1. When this crossed-out wheeled bin
symbol is attached to a product, it
means the product is covered by the
European Directive 2012/19/EU.
2. All electrical and electronic products
should be disposed of separately from
the municipal waste stream via
designated collection facilities
appointed by the government or the
local authorities.
3. The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
For this product’s recycling information based on WEEE
directive, please send an e-mail to [email protected]

14
EU DECLARATION OF CONFORMITY
Hereby, ZTE Corporation declares that the radio
equipment type ZTE A7040 is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following Internet address:
https://certification.ztedevices.com
The device is restricted to indoor use only when
operating in the 5150 to 5250 MHz frequency range.
AT BE BG HR CY CZ DK
EE FI FR DE EL HU IE
IT LV LT LU MT NL PL
PT RO SK SI ES SE UK(NI)
ErP Conformity
The external power supply of this product conforms to
the Energy-related Product Directive (ErP) 2009/125/EC
of the European Parliament and the Council.
The detailed ErP information is available on ZTE website
https://certification.ztedevices.com.

15
ZTE Blade A72
Kurzanleitung

16
RECHTLICHE INFORMATIONEN
Copyright © 2022 ZTE CORPORATION.
Alle Rechte vorbehalten.
Dieses Benutzerhandbuch darf ohne die vorherige
schriftliche Zustimmung der ZTE Corporation weder
ganz noch in Auszügen zitiert, vervielfältigt, übersetzt
oder in jedweder Form und unter Verwendung jedweder
Mittel, seien es elektronische oder mechanische,
inklusive der Erstellung von Fotokopien und Mikrofilmen,
verwendet werden.
Hinweis
Die ZTE Corporation behält sich das Recht vor,
Druckfehler und technische Daten in diesem Handbuch
ohne Vorankündigung zu korrigieren bzw. zu
aktualisieren.
Für kundige Anwender bieten wir auch die Möglichkeit
der selbstständigen Fehlerbehebung an. Bitte besuchen
Sie die offizielle ZTE-Website (unter
www.ztedevices.com), um weitere Informationen zum
Benutzerhandbuch, zur selbstständigen Fehlerbehebung
und zu den unterstützten Produktmodellen zu erhalten.
Informationen auf der Webseite haben Vorrang vor
denen in diesem Dokument.
Haftungsausschluss
Die ZTE Corporation übernimmt ausdrücklich keine
Haftung für Fehler und Schäden, die durch nicht
autorisierte Veränderungen an der Software verursacht
wurden.
Die in dieser Anleitung verwendeten Bilder und
Screenshots können vom tatsächlichen Produkt
abweichen. Inhalte in diesem Handbuch können vom
tatsächlichen Produkt oder der Software abweichen.
Eingetragene Marken
ZTE und die ZTE-Logos sind eingetragene
Markenzeichen der ZTE Corporation.
Android™ ist eine Marke von Google LLC.
Die Marke Bluetooth®und die Logos sind Eigentum der
Bluetooth SIG, Inc. und jegliche Nutzung dieser Marken
durch die ZTE Corporation ist lizenziert.
Das microSDXC-Logo ist eine Marke von SD-
3C, LLC.
Sonstige Markenzeichen und Handelsnamen sind
Eigentum ihrer jeweiligen Inhaber.

17
Erstes Kennenlernen Ihres Telefons
Ihr Telefon unterstützt 2,4 GHz und 5 GHz WLAN.
Frontkamera
Touchscreen
Hörer
Lautstärketaste
Ein/Aus-Taste /
Fingerabdruck-
Sensor
Lade-/Typ C-USB-
A
nschluss
Kopfhörer-
A
nschluss
Rückseitige
Kameras und
Blitz
Lautsprecher
A
nzeigeleuchte
nano-SIM/
microSDXC-
Kartenfach
Näherungs- und
Lichtsensor

18
Einrichten Ihres Telefons
Die nano-SIM-Karten können bei eingeschaltetem
Telefon eingelegt und entfernt werden.
WARNUNG!
Um das Telefon nicht zu beschädigen, verwenden Sie
keine SIM-Karten anderer Art und keine aus einer SIM-
Karte gefertigte nano-SIM-Karte, die nicht dem Standard
entspricht. Eine Standard-nano-SIM-Karte erhalten Sie
bei Ihrem Serviceanbieter.
1. Führen Sie die Spitze des Auswurfwerkzeugs in das
Loch des Kartenfachs ein.
HINWEIS:
Bitte verwenden Sie das im Lieferumfang enthaltene
Auswurfwerkzeug. Andernfalls kann das Kartenfach
möglicherweise nicht ausgeworfen werden.
ACHTUNG:
Ersetzen Sie niemals das im Lieferumfang enthaltene
Auswurfwerkzeug durch scharfe Objekte. Stellen Sie
sicher, dass das Auswurfwerkzeug senkrecht zur
Öffnung steht. Andernfalls kann das Telefon beschädigt
werden.