Zte MF65M User manual

MF65M
Quick Start Guide
Conguration page: http://mi.orange.cm
Password: admin

Getting to Know Your Device
Appearance
The following gure is for your reference only.
1. LED Indicators
2. Power Key
3. WPS Key
4. Charging/micro-USB Jack
5. (U)SIM Card Slot
6. microSDHC™ Card Slot
NOTE:
microSDHC logo is a trademark of SD-3C, LLC.
1

Getting to Know Your Device
Indicators
When the device is powered on, the following icons may be
lighting. For a description of the icons, refer to the following
table.
Indicator Status Description
Network
Red solid
Error status. Not registered to
the mobile network, no (U)SIM
card inserted or no network
service available.
Green solid Registered to the mobile
network.
Green
blinking
Connected to the mobile
network and data is being
transferred.
Wi-Fi
Blue solid Wi-Fi is active.
Blue blinking WPS is active.
off Wi-Fi is off or your device is in
sleep mode.
2

SMS Blue solid You have unread messages.
Blue blinking You have new messages.
off No unread messages.
Battery
Red solid /
blinking
The battery is low. Please
charge the battery.
Green
blinking
The battery is being charged
or in standby mode.
Green solid The battery level is middle or
high.
off
Your device is turn off and not
being charged, or the battery
is not inserted.
Getting to Know Your Device
3

Connection Scenarios
The Orange 3G hotspot Wi-Fi MF65M creates a personal
portable Wi Fi zone which allows several Wi-Fi enabled
devices (for example PCs, Apple® iPhone, iPad or iPod
touch, or mobile gaming devices such as Nintendo® DSi,
Android devices including smartphones and tablets) to
share a secure mobile internet connection.
The device can access the Internet and it allows multiple
clients to surf on the Internet at the same time, up to ten
terminal devices connection. The following gure is for your
reference only.
3G Mode: A (U)SIM card can be used to access the Internet.
Getting to Know Your Device
4

Installing Your Device
1. Slide the back cover and remove it.
NOTE:
Do not remove the cover rudely.
2. Install a (U)SIM card to the (U)SIM card slot.
WARNING!
Your device does not support the micro-SIM card and
nano-SIM card or any other non-standard SIM cards. To
avoid damage to the device, do not use those cards or any
card holders.
5

3. Install the microSDHC card if necessary.
Installing Your Device
6

4. Install the battery.
5. Close the back cover.
Installing Your Device
7

Connecting to Your Device
Using Wi-Fi
1. Power on your device.
2. Make sure your computer or other client devices
have enabled Wi-Fi, and search for available wireless
networks.
8