Zte MF193A User manual

MF193A
USB Modem
Quick Start Guide

2
LEGAL INFORMATION
Copyright © 2013 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted,
reproduced, translated or utilized in any form
or by any means, electronic or mechanical,
including photocopying and microlm, without
the prior written permission of ZTE Corpora-
tion.
The manual is published by ZTE Corporation.
We reserve the right to make modications
on print errors or update specications with-
out prior notice.
Version No. : R1.0

3
Getting to know your device
Your device supports data and SMS services
through the mobile phone network, enabling
you to communicate anytime and anywhere.
The following figure is only for your refer-
ence. The actual product may be different.
1. USB Connector
2. SIM/USIM card slot
3. microSD card slot
4. Modem Cap
5. Front Cover

4
Installation Guide
Installing Hardware
1. Press and push the front cover and re-
move it.
NOTE:
Do not open the front cover rudely so as to
avoid the damage of the front cover.
2. Insert the SIM/USIM card into the SIM/
USIM card slot.
Insert the SIM/USIM card with the metal
contact area facing downwards into the slot,
and then push the SIM/USIM card as far as
possible.
3. Insert the microSD card into the microSD
card slot.
NOTES:
• This modem only supports microSD card.
• microSD is a trademark of SD
Card Association.

5
Insert your SIM/USIM card and microSD card
into the SIM/USIM card slot and microSD
card slot, as shown below.
4. Put the front cover atly upon the body of
modem and push the front cover to lock
the cover in its place.

6
Connecting the Modem to Your
PC
1. Plug the USB connector into the USB port
and make sure it is tightly inserted.
2. The OS automatically detects and
recognizes new hardware and starts the
installation wizard.
Installing Software
On different operating systems, the installa-
tion procedures may be difference. Follow
the system prompts during operation.
For Windows OS
Your system will start the software setup
process automatically when you connect the
modem to your computer correctly. Follow
the system prompts to complete the software
installation.
Note: If the system does not launch
installation automatically, you can run the
installation program in path of My Computer
> GP Internet.

7
For Mac OS
The system will automatically display a GP
Internet CD-ROM icon on the desktop, when
you connect the modem to your computer
correctly. Double click the installation
software package in the GP Internet, and
follow the system prompts to complete the
software installation.
Removing the Modem From Your PC
Please close the application software, and
then you can pull out the USB Modem safely.
How to Use Your Modem
Various icons are presented to enable quick
operation of the following functions:
Connection Connect to the Internet.
Statistic Show the connection
information.
SMS Send, receive and
forward text messages.
Phonebook Manage the contacts
information.
USSD &
Recharge
Support USSD and
recharge service.
Internet
Package
This function enable the
user to activate various
internet packages.

8
Warning and Notice
To the owner
• Some electronic devices are susceptible
to electromagnetic interference sent by
modem if inadequately shielded, such as
the electronic system of vehicles. Please
consult the manufacturer of the device
before using the modem if necessary.
• Operating of laptop and desktop PCs and
the modem may interfere with medical
devices like hearing aids and pacemak-
ers. Please always keep them more than
20 centimeters away from such medical
devices when they are turned on. Turn
the modem off if necessary. Consult a
physician or the manufacturer of the
medical device before using the modem.
• Be aware of the usage limitation when
using a modem at places such as oil
warehouses or chemical factories, where
there are explosive gases or explosive
products being processed. Turn off your
modem if required.
• The use of electronic transmitting de-
vices is forbidden in aircrafts, at petrol
stations and in hospitals. Please observe
and obey all warning signs and switch off
your modem in these conditions.

9
• Do not touch the inner antenna area if
not necessary. Otherwise it will affect
your modem’s performance.
• Store the modem out of the reach of little
children. The modem may cause injury if
used as a toy.
• Do not touch the metallic parts of the
modem so as to avoid a burn, when the
modem is working.
Using Your USB Modem
• Please use original accessories or ac-
cessories that are authorized. Using any
unauthorized accessories may affect
your modem’s performance, and violate
related national regulations about tele-
com terminals.
• Avoid using the modem near or inside
metallic structures or establishments that
can emit electromagnetic waves. Other-
wise it may inuence signal reception.
• The modem is not waterproof. Please
keep it dry and store in a shady and cool
place.
• Do not use the modem immediately after
a sudden temperature change. In such
case, it will produce dew inside and out-
side the modem, so don’t use it until it
becomes dry.

10
• Handle the modem carefully. Do not drop,
bend or strike it. Otherwise the modem
will be damaged.
• No dismantling by non-professionals and
only qualied technicians can undertake
repair work.
• Operating temperature range of -10°C ~
+60°C and humidity range of 5% ~ 95%
are recommended.
Limited Warranty
• This warranty does not apply to defects
or errors in the Product caused by:
i. Reasonable abrasion.
ii. End User’s failure to follow ZTE’s in-
stallation, operation or maintenance
instructions or procedures.
iii. End User’s mishandling, misuse,
negligence, or improper installation,
disassembly, storage, servicing or
operation of the Product.
iv. Modications or repairs not made by
ZTE or a ZTE-certied individual.
v. Power failures, surges, fire, flood,
accidents, actions of third parties or
other events outside ZTE’s reason-
able control.
vi. Usage of third-party products, or us-
age in conjunction with third-party
products provided that such defects
are due to the combined usage.

11
vii. Any other cause beyond the range of
normal usage intended for the Prod-
uct.
End User shall have no right to reject or
return the Product, or receive a refund for
the Product from ZTE under the above-
mentioned situations.
• This warranty is End User’s sole remedy
and ZTE’s sole liability for defective or
nonconforming items, and is in lieu of all
other warranties, expressed, implied or
statutory, including but not limited to the
implied warranties of merchantability and
fitness for a particular purpose, unless
otherwise required under the mandatory
provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of prots
or indirect, special, incidental or consequen-
tial damages resulting from or arising out of
or in connection with using of this product,
whether or not ZTE had been advised, knew
or should have known of the possibility of
such damages, including, but not limited to
lost prots, interruption of business, cost of
capital, cost of substitute facilities or product,
or any downtime cost.

12
How to Get Help
You can use the following methods to get
Help:
• Click Help on the software.
• Send E-mail to [email protected]
• Visit http://www.zte.com.cn
• Call Service Hotline: [phone]