Zte MF70 User manual
LEGAL INFORMATION
Copyright © 2014 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any
means, electronic or mechanical, including photocopying and microlm, without the prior written per-
mission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modications on print er-
rors or update specications without prior notice.
Version No. : R1.0
Edition Time: 2014.04
Getting to Know Your Device
Your device supports data and SMS services through the mobile phone network, enabling you to
communicate anytime and anywhere.
The following gure is only for your reference. The actual product may be different.
1. microSDHC card slot
2. Reset button
3. (U)SIM card slot
4. USB connector
5. External antenna connector
6. Front cover
7. LED indicator
8. Modem cap
NOTE:
• microSDHC™ logo is a trademark of SD-3C, LLC.
• Use the original external antenna if necessary.
Indicator
Indicator Status Description
3G
Red solid Turned on and not registered.
Green solid Registered to 2G.
Green blinking Connected to 2G and data is being transferred.
Blue solid Registered to 3G.
Blue blinking Connected to 3G and data is being transferred.
Wi-Fi
Blue blinking Wi-Fi is Active.
Blue solid WPS is Active.
LED off Wi-Fi is off.
Connection Scenario
Your device supports multi-clients for surng on the Internet at the same time. The following gure is
only for your reference.
TIP: With other accessories, such as mobile power and car power adapter, you will be able to supply
power to your device and use it anywhere and anytime.
Installation Guide
Installing the (U)SIM Card and microSDHC Card
1. Open the front cover.
NOTE:
Do not open the front cover rudely. Failing to do so may cause damage to
the front cover.
2. Install the (U)SIM card to the (U)SIM card slot.
IMPORTANT: Your device does not support the Micro/Nano SIM card or
any other nonstandard SIM cards. To avoid damaging the device, do not
use those cards or any card holders.
23456
3. Install the microSDHC card to the microSDHC card slot.
4. Close the front cover gently back into place.
Connecting the Modem to Your PC
Via USB Connector
Install the device to your computer’s USB port securely. The OS automatically detects and recognizes
your modem and starts the installation wizard.
NOTE: If the system does not launch installation automatically,
you can run the installation program by selecting My Com-
puter > airtel 3G.
Via Wi-Fi
1. Power on your device.
2. Use your normal Wi-Fi application on the client to search
the available wireless network.
NOTE: Please set the client to obtain an IP address automatically referring to the chapter “Conguring
your PC”, and then the client will get an IP address like “192.168.0.100”.
3. Select the SSID of your device, and then click Connect.
4. Input the password, and then click Connect.
NOTE:
You may need to enter the password for the Wi-Fi connection. You can view the label on your device
to get the default password.
5. Wait a moment, and then the client will connect to your device successfully.
ZTE corporation,
Millennium Business Park ,
A/8 Sector -1 2nd Floor
A- Wing Mahape,
Navi Mumbai 400710 INDIA
78910 11
MF70
USB Modem
Quick Start Guide
After successful login, you will see the gure as shown below.
Accessing the Internet
After the device is connected to your PC successfully, you can access the Internet in Automatic or
Manual mode. The default mode is Automatic.
Mode Operation
Automatic Your device is connected to the Internet automatically, and you can surf on the
Internet directly.
Manual
1. Log in to the web GUI conguration page.
2. Select Settings > Network Settings > Dial-up Settings > WAN Connection
Mode > Manual, and then click Apply to conrm your conguration.
3. Click Home and then click Connect to access the Internet.
NOTE:
To modify the parameters of your device, log in to the web GUI configuration page by visiting
http://192.168.0.1 or http://u.ztedevice.com. The default password is admin.
Conguring Your PC
Follow the following steps and gures for Windows XP to congure the Internet Protocol for your Wi-
Fi connection.
1. Right-click My Network Places, and then select Properties.
2. Right-click Wireless Network Connection, and then select Properties.3. Select Internet Protocol (TCP/IP), and then click Properties.
Login
1. Make sure the connection between your device and the client is correct.
2. Launch the Internet browser and enter http://192.168.0.1 or http://u.ztedevice.com in the ad-
dress bar.
NOTE: It is recommended that you use IE (7.0 or later), Firefox (15.0 or later), Opera (10.0 or later),
Safari (4.0 or later), Google Chrome (10.0 or later).
3. The login page appears as follows. The following
gure is only for your reference.
4. Input the password (the default password is admin).
5. Click Login to log in to the device.
12 13 14 15 16 17
Warning and Notice
To the Owner
• If inadequately shielded, some electronic devices may be affected by the electromagnetic inter-
ference caused by the modem, such as the electronic system of vehicles. Consult the manufac-
turers of such devices before using the modem if necessary.
• Operating the modem may interfere with medical instruments such as hearing aids and pace-
makers. Always keep the modem more than 20 centimeters away from such medical instruments
when your modem is turned on. Turn the modem off if necessary. Consult a physician or the
manufacturers of medical instruments before using the modem if necessary.
• Be aware of the usage limitation when using the modem at places such as oil warehouses or
chemical factories, where there are explosive gases or explosive products being processed. Turn
off the modem if necessary.
• Do not use electronic transmission devices in aircrafts, at petrol stations or in hospitals. Observe
and obey all warning signs, and turn off the modem in these conditions.
• Do not touch the inner antenna area unless it is necessary. Otherwise the performance of the
modern may be affected.
• Keep the modem out of the reach of little children. The modem may cause an injury if used as a
toy.
• When the modem is operating, do not touch the metallic parts. Failing to do so may cause burns.
Using Your USB Modem
• Use original accessories or accessories that are authorized. Using any unauthorized accessories
may affect the performance of the modem and violate the related national regulations about tele-
com terminals.
• Avoid using the modem near or inside metallic structures or establishments that can emit electro-
magnetic waves, because signal reception may be affected.
• The modem is not waterproof. Keep the modem dry and store it in a shady and cool place.
• Do not use the modem immediately after a sudden temperature change. In such case, dew may
be generated inside and outside the modem, so do not use it until it becomes dry.
• Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem may be dam-
aged.
• Only qualied personnel can dismantle and repair the modem.
• An operating temperature between -10°C and +60°C and a humidity between 5% and 95% are
recommended.
Limited Warranty
• This warranty does not apply to defects or errors in the product caused by:
i. Reasonable abrasion.
ii. End users’ failure to follow ZTE’s installation, operation or maintenance instructions or proce-
dures.
iii. End users’ mishandling, misuse, negligence, or improper installation, disassembly, storage,
servicing or operation of the product.
iv. Modications or repairs not provided by ZTE or a ZTE-certied individual.
v. Power failures, surges, re, ood, accidents, and actions of third parties or other events out-
side ZTE’s reasonable control.
vi. Usage of third-party products, or usage in conjunction with third-party products if such de-
fects are due to the combined usage.
vii. Any other cause beyond the range of normal usage intended for the product.
End users have no right to reject or return the product, or receive a refund for the product from ZTE
under the above-mentioned situations.
• This warranty is end users’ sole remedy and ZTE’s sole liability for defective or nonconform-
ing items, and is in lieu of all other warranties, expressed, implied or statutory, including but not
limited to the implied warranties of merchantability and tness for a particular purpose, unless
otherwise required under the mandatory provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of prots or indirect, special, incidental or consequential damages
resulting from or arising out of or in connection with using of this product, no matter whether or not
ZTE had been advised, knew or should have known of the possibility of such damages, including, but
not limited to lost prots, interruption of business, cost of capital, cost of substitute facilities or prod-
uct, or any downtime cost.
How to Get Help
You can get help by:
• Sending an E-mail to [email protected]
• Visiting www.airtel.in
• Calling the service hotline: 1800 -1030405
4. Select Obtain an IP address automatically and Obtain DNS server address automatically,
and then click Ok to nish the conguration.
18 19 20 21 22 23
Other manuals for MF70
2
Other Zte Modem manuals
