On different operating systems, the installation and removal procedures may differ.
Follow the system prompts during operation.
zFor Windows system
Your system will start the software setup process automatically when you
connect the modem to your computer correctly. Follow the system prompts to
Getting to know your device
The following figure shows the appearance of the MF626. It is only for your reference.
The actual product may be different. 1) Insert the SIM/USIM card into the USB modem
To install SIM/USIM card
zFirst take down the modem cap, then the USB connector
is visible.
zPull the plastic socket above the USB connector out.
Note: Do not pull the USIM socket rudely for the socket is
fixed with the modem. Otherwise the socket will get damaged.
zThen insert the SIM/USIM card into the socket, here make
sure that metal contact area facing to the modem.
zInsert the plastic socket into the modem. You can hear a
click when the SIM/USIM card locks into place.
To Remove the SIM/USIM card from the USB modem
zFirst take down the modem cap.
zPull the plastic socket slightly, and you can hear a click when the SIM/USIM card
gets unlocked.
zTake off the SIM/USIM card.
2) Install the microSD card into the USB modem:
Install microSD card in the USB modem, if you want to use it.
Insert the microSD into the microSD slot from the side of the modem, the following
picture indicates the correct inserting direction.
Indicator
It indicates your modem status.
Memory card slot (microSD card)
It is where you insert memory card (microSD card).
Modem cap
It protects your modem USB port when it is not used.
SIM/USIM card slot
It is where you insert the subscriber identity module/UMTS subscriber identity mod-
ule (SIM/USIM) card
USB connector
Connect your modem to the laptop or desktop computer.
1
2
34
5
Set up your modem
The driver of the microSD card will installed automatically when the modem driver is
installed.
3) Connect the USB modem to your PC:
zPlug the USB modem into your computer’s USB port and ensure that it is tightly
inserted.
zThe OS automatically detects and recognizes new hardware and starts the
installation wizard.
Software installation guide
