ZURN Sundara Z5005.03 User manual

Sundara® Inlet Triple Basin
Hand Washing System
Sundara®Inlet Triple Basin
Hand Washing System
LIMITED WARRANTY
All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the
date of purchase. Decorative nishes warranted for one year. We will replace at no costs goods that prove defective provided we are
notied in writing of such defect and the goods are returned to us prepaid at Atlanta, GA, with evidence that they have been properly
maintained and used in accordance with instructions. We shall not be responsible for any labor charges or any loss, injury or damages
whatsoever, including incidental or consequential damages. The sole and exclusive remedy shall be limited to the replacement of the
defective goods. Before installation and use, the purchaser shall determine the suitability of the product for his intended use and the
purchaser assumes all risk and liability whatever in connection therewith. Where permitted by law, the implied warranty of merchantabi-
lity is expressly excluded. If the products sold hereunder are “consumer products,” the implied warranty of merchantability is limited to
a period of three years and shall be limited solely to the replacement of the defective goods. All weights stated in our catalogs and lists
are approximate and are not guaranteed.
NOTE:READ ENTIRE MANUAL PRIOR TO INSTALLING PRODUCT.
NOTE: The information in this manual is subject to change at any time without notice. Installations may
be performed at di󰀨erent times of construction by di󰀨erent individuals. For this reason, these instructions
should be left on-site with the facility or maintenance manager.
Z5005.03
Installation, Maintenance,
and Parts Manual
PATENT(S) PENDING
WARNING: Cancer and Reproducve Harm - www.P65Warnings.ca.gov
ADVERTENCIA: Cáncer y daño reproducvo - www.P65Warnings.ca.gov
AVERTISSEMENT: Cancer et eets néfastes sur la reproducon - www.P65Warnings.ca.gov
Patent zurn.com/patents
US 1.855.ONE.ZURN CANADA 1.877.892.5216
ZURN.COM
Rev. B | Date: 10/13/22 | C.N. No. 144818 | Prod./Dwg. No. FV664

FV664 Rev. B 10/13/2022
Page 3
FV664 Rev. B 10/13/2022
Page 2
Overview:
Designed for modern commercial restrooms, the Sundara system delivers a superior user experience in both form and func-
tion. Crafted by world-class industrial designers Sundara combines seamless basin designs with curated faucets and soap
dispensers, delivering a complete, easy to install hand washing solution.
Z5005.03 Parts List
Specications:
Sundara®Inlet triple basin lavatory system manufactured by Zurn Industries. Lavatory shall be mounted at standard height to
conform with ANSI, UFAS, TAS and ADA Accessibility Standards. Counter and integral basin to be constructed of Sundara®
solid surface resin with aluminum trihydrate and other additives conforming to CSAB45.5 / IAPMO Z124 and IAPMO IGC 156
standards. Shroud enclosure is constructed of satin nished type 304, 18 gage stainless steel designed for easy access with
vandal resistant hardware. Lavatory is furnished complete with 0.5 gpm spray ow sensor operated faucet (specify model) and
optional liquid soap dispenser (specify model), ½” quarter turn supply stops, 3/8” exible supply risers, chrome 1 ¼” tail piece,
and chrome 1 ¼” p-trap for complete system operation.
Paired Faucet Typical Specication
(Refer to faucet manual for more details on specic model)
Voltage: 6 VDC Series [4 “AA” (Alkaline or Lithium) and/or external power option]
Sensor Range: Self-calibrated, dependent upon sink depth and nish.
Operating Water Pressure: 10-125 psi
Operational Water Temperature: 33°F to 140°F (1°C to 60°C)
Aerator: 0.5 GPM Vandal-Resistant (Standard)
Paired Soap Dispenser Typical Specication
(Refer to soap dispenser manual for more details on specic model)
Power Supply: AC 110 V; DC 6V
Soap Viscosity: 100-3800 cps
Operating Temperature: 340- 1310F
Typical Dispensed Volume: 1.25 ml
Important Safety Information:
• Installer is responsible for ensuring the product is installed and conforms to all plumbing codes and ordinances.
• Do not convert or modify this Zurn product yourself. All warranties will be voided.
• Water supply lines must be sized according to building design in order to provide adequate water supply for each xture.
• Flush all water lines prior to making connections.
• Minimum 3 people required for the sink installation.
• Au minimum, 3 personnes sont requises pour l’installation du lavabo.
Prior to Installation:
• If applicable, carrier (Z1240 series) is installed behind the wall.
• Hot and cold water supply lines are installed as per building codes.
• Care shall be taken when installing this product to prevent damage of any exposed or decorative surfaces.
• Measure the drain outlet from the oor.
Optional
11
12
Be sure the sink/lavatory/basin is clear from any objects upon making the sensor to electronics connection initiating the self-
calibration feature. The sink must be clear of any and all objects in order to calibrate appropriately (calibration time approx 30-
60sec). Note: Not applicable to manual faucet installations.
S’assurer qu’aucun objet ne se trouve sur l’évier/le lavabo/le bac lors du branchement du capteur sur l’électronique, ce qui lance la
fonction d’auto-étalonnage. Rien ne doit se trouver sur le lavabo pour permettre son auto-étalonnage correct (temps
d’étalonnage de 30 à 60 s environ).
13
14
15
16
17
18
19
20
21
22
Item Name QTY
1 Basin 1
2 Shroud 1
3Shroud Wall Bracket 1
4
Shroud Hanger Brackets 6
5Mounting (L) Bracket 6
6"Wall Hanger Bracket
(Available only for Retrot)" 3
7 Solid Top Open Grid Drain 3
8Water Supply Items 6
9
Shroud Handle
2
10 P Trap Assembly 3
11 Sensor Faucet 3
12 Soap Dispenser (If Ordered) 3
13 "5/16-18 Screw for Mounting
L Bracket to Basin" 12
14 #10-24 Screw Shroud 2
15 Coarse Screw for Wall Bracket 2
16
#8-32 Screw for Shroud Handle 2
17 Oversize 5/16 Washer 12
18 3/8-16 Hex Bolt with washer 33
19 3/8" Toggle Never Drop Anchor 39
20 3/8 Fender Washer 33
21 5/16" x 2 5/8" Clevis Pin 2
22 18-8 SS Hairpin Cotter 2
1
2
3
5
6
7
8
4
9
10

FV664 Rev. B 10/13/2022
Page 5
FV664 Rev. B 10/13/2022
Page 4
Plumbing and Electrical Rough-Ins
L Brackets Installation
Note: InstallingtheP-trapoutletlowerthan19.5”fromnishedoorwillpreventthe
vandal shroud from being installed.
Socket Wrench:
5/16” & 3/8”
Torx Wrench:
T10 & T25
Non-toothed Wrench
Z6950/52/53/54/56/57-SD HANGER BRACKET
ELECTRICAL OUTLET
Required Tools:
Note: Require a minimum of 1 anchor next to each pivot point to prevent execessive
exingwhenshroudisinfullyopenposition.
Faucet Installation
For ease of installation, lay basin on its back.
Refer to faucet installation guide for details.
6 [152]
1
2[12.7] **
13
17
4
For ease of installation, lay basin on its top surface on a cushioned surface.
Install hanger brackets 1/2 inch from front face of L-bracket as shown.**
Use socket wrench to torque the screws (approximately 4-5 complete turns bottom out approximately 5 ft-lbs of torque).
Warning: Do not overtighten the screws.
Avertissement : ne pas trop serrer les vis.

FV664 Rev. B 10/13/2022
Page 7
FV664 Rev. B 10/13/2022
Page 6
Soap Dispenser Installation
Grid Drain Installation
For ease of installation, lay basin on its back.
Install the soap spout on right or left soap hole as applicable.
Refer to soap dispenser installation guide for details.
Retrotting Hanger Bracket Installation
Recommended for retrot:
• Measure the rough in dimensions on the wall. Top edge of the cutout marked must be 2” below the basin top back
edge.
• Cut the drywall to suitable size (90”x10”) and attach a minimum of 1/2” thick plywood to the wall stud and ush to the
drywall.
• Drill eight ¾” holes in the plywood at the locations shown in the graphic to the top. Then, install the supplied toggle
anchors to wall and secure the hanger bracket(s) directly to the plywood with the supplied bolts.
• Install hanger bracket to wall per structural rough-in. (Note: An o󰀨set might be necessary on applications using tile to
get the basin and mounting brackets ush with wall and mating to bracket)
• The plywood should not be visible after basin and shroud installation.
• The bracket needs to be checked for level after installation.
1 [25]
31
2 [89]4 [99]31 2 [89]
For ease of installation, lay basin on its back.
Place grid draininto drainage opening.
Fasten washer and nut from underside of basin.
1 [25]
3
1
2 [89]
4 [99]3
1
2 [89]
20
19
18
Plywood
Wall Stud
Bolt supplied by
installer to attach
the plywood to
wall studs
Hanger Bracket
Hanger Bracket
Wall Stud
Drywall
1/2” Thick
Plywood

FV664 Rev. B 10/13/2022
Page 9
FV664 Rev. B 10/13/2022
Page 8
Soap Dispenser Bracket
and Bottle Installation
Refer to soap dispenser installation guide for details.
Installing Mounting Bracket
• Secure the mounting bracket to the plywood cut-out with supplied washers, bolts and toggle an-
chors on the plywood.
Installing with Carrier Option
Warning: Must be handled by at least 3 people
Warning: Ensure the basin back edge is completely supported in the wall bracket.
Avertissement : s’y prendre à trois minimum.
Avertissement : s’assurer que le bord arrière du bac est complètement soutenu par le support mural.
Warning: Must be handled by at least 3 people
Avertissement : s’y prendre à trois minimum.
Refer to Carrier Rough-in & Installation guide for details.
Mounting
Bracket
Bolt supplied by
installer to attach
the plywood to
wall studs
18 19
20
Plywood
Wall Stud
Optional Waste
Line Sleeve (-WL)
Z1240-EZR
Carrier System