ZURN AQUASPEC Z82500 SERIES User manual

Form#CF99 Date: 1/23/07
C.N. No. 105621 Rev.G
®
PAGE1 OF 2
INSTALLATIONINSTRUCTIONS
1. REMOVEFAUCETBODYFROMCARTONANDINSTALLGASKET (ITEM #4A) ON SHANK.
2. OPTIONALANTI-ROTATIONPINS(-AR),THREADANTI-ROTATIONPINS INTOTHETHREADEDHOLESONTHEUNDER
SIDEOFTHESINGLELAB BODY. SEE PAGE2FORROUGH-INDIMENSIONSTOACCOMODATETHE(-AR)OPTION.
3. PLACE FAUCET ON SINK, PLACE LOCK WASHER (ITEM #4B) ON SHANK AND SECURE WITH PLASTIC MOUNTING NUT
(ITEM#4C).
4. HAND TIGHTEN MOUNTING NUT FROM UNDER SINK. MAKE SURE FAUCET IS CENTERED PROPERLY.
DO NOTOVERTIGHTEN.
5. ATTACHLAVATORYSUPPLYTO FAUCETWITHRISERNUT(ITEM#4D).
6. INSTALLSPOUTINTO BASEAND TIGHTEN NUT (SEE VIEWS FOR SWING/RIGIDCONNECTION).
7. OPTIONALGRIDSTRAINER (-G)/HANDICAP OFFSET GRID DRAIN (-GH)
INSTALL GRID STRAINER IN SINK OUTLETAND PLUMB WASTE CONNECTION.
8. TURNSUPPLY WATER ONAND OPERATE FAUCET CHECKING FOR LEAKS.
9. ITMAYBENECESSARYTOSHUT WATER OFFAND REMOVE CARTRIDGETOCLEAN SUPPLYLINE. CARTRIDGE
CANBEREMOVED BYFIRSTREMOVINGTHEHANDLE. COLORINDEX CAN BE REMOVED BY INSERTINGA
PIN INTO THE HOLE ONTHE UNDERSIDE OF THE HANDLE. AFTER THE HANDLE HAS BEEN REMOVED, UNSCREW
THE HANDLE NUT AND PULL OUT ON THE CARTRIDGE. ZURN WILL SUPPLY HANDLE PORT PLUG (ZURN
PART #61094001) AT YOUR REQUEST.
10. REPLACE CARTRIDGE IN BODYAND HAND TIGHTEN HANDLE NUT. PLACE HANDLE ONTHE CARTRIDGE STEMAND
LOCATEAS DESIRED. TIGHTEN HANDLE NUT.
11. REPLACE HANDLE SCREW AND COLOR INDEX BUTTON.
12. INSTALLAERATORINTOFAUCETAND HAND TIGHTEN. ITMAYBENECESSARYTOUNSCREWAND CLEAN
AERATORATSTART-UP.
AQUASPEC FAUCETS
MODEL - Z82500 SERIES
SINGLE HOLE LABORATORY FAUCET
TECHNICALINFORMATION
FLOW: 2.2 GPM [8.3 L] PRESSURE COMPENSATINGAERATOR *
MAXIMUM PRESSURE: 125 PSI
MAXIMUM TEMPERATURE: 180O FF
HANDLE NUT TORQUE: 15-20 FT - LBS.
CARTRIDGE STYLE: QUARTER TURN CERAMIC DISK
* OTHER AERATORS AVAILABLE BY REQUEST

ZURNINDUSTRIES,INC.
COMMERCIALBRASSOPERATIONS
2640 SOUTH WORK STREET
FALCONER, N.Y. 14733
PHONE: [phone] FAX: [phone]
WORLD WIDE WEB: www.zurn.com Form# CF99 Date: 1/23/07
C.N. No. 105621 Rev.G
PAGE 2 OF2
MAINTENANCE
1. YOUR ZURNAQUASPEC FAUCETHASAHIGHLY POLISHED NICKELCHROME PLATED FINISH.CLEAN WITH SOAPAND
WATER ORAMILD CLEANER WHICH IS SAFE FOR CHROME PLATING. DO NOTUSEACIDS OR TOILETBOWLCLEANER
ASTHEYWILLDAMAGE THE FINISH.
2. AQUASPECFAUCETSCONTAINCERAMICDISK CARTRIDGESWHICH REQUIRENOMAINTENANCE. TOREMOVETHE
CARTRIDGE, SHUTTHE WATER OFF, LOOSEN THE HANDLE NUTSAND PULLUP ON THE CARTRIDGE.
REPLACEMENTPARTS
CARTRIDGE 59517002
INDEXBUTTONS G60500
Z825A1PICTURED
Item Part Number Description Qty
1 59733002 SINGLELAB BODY 1
2 59517002 SHORTHOTCARTRIDGE 1
3 59523001 HANDLENUT 1
4 G63367 MOUNTINGHARDWARE 1
Item Part Number Description Qty
4A 60549001 GASKET 1
4B 61613019 LOCKWASHER 1
4C 59530002 MOUNTINGNUT 1
4D 59532001 RISERNUT 1
Z82500PARTS LIST