ZURN AQUASPEC Z83600 Series User manual

AQUASPEC FAUCETS
MODEL - Z83600 SERIES
BUBBLER
TECHNICALINFORMATION
FLOW: 1.0 GPM @ 80 PSIADJUSTABLE
MAXIMUM PRESSURE: 125 PSI
MAXIMUM TEMPERATURE: 180OFF
®
INSTALLATION INSTRUCTIONS
1. THE WATER SUPPLY LINE MUSTBETHOROUGHLY FLUSHED BEFORE BUBBLER INSTALLATION.
2. REMOVEBUBBLER FROM CARTONANDPLACE GASKET(#11A) ONSHANK.
3. PLACE BUBBLER ON SINK, MOUNT LOCKWASHER (#11B)AND MOUNTING NUT (#11C) ONTO SHANK FROM UNDER
SINK.
4. HAND TIGHTEN MOUNTING NUT(#11C). MAKE SURE BUBBLER IS CENTERED PROPERLY. DO NOT OVER TIGHTEN,
YOUCOULDDAMAGE THE FIXTURE.
5. ATTACH LAVATORYSUPPLY TOTHE OUTLET OF BUBBLER WITH RISER NUT (#11D).
6. TURN SUPPLY WATER ONAND OPERATE THE BUBBLER WHILE CHECKING FOR LEAKS
PAGE 1OF3
IMPORTANTTHE WATERSUPPLYLINESMUSTBE THOROUGHLYFLUSHED BEFOREINSTALLATION TOPREVENT
FOREIGNMATTERANDDEBRISFROMCLOGGINGAND/OR DAMAGINGINTERNALCOMPONENTSANDTHEREBYPREVENTING
THEFAUCETFROMFUNCTIONINGPROPERLY
*
IMPORTANTTHE FAUCETHASAN INTEGRALSHANKFILTERASSEMBLYINSTALLEDINTHE BODYUNDERTHE METERING
CARTRIDGETOPREVENT FOREIGNMATTERANDDEBRIS FROMDAMAGINGTHEFAUCET. THEINTEGRALFILTERMAYBE
REMOVEDTO BEBACK-FLUSHEDANDCLEANEDIFINSUFFICIENTFLOW ISDETECTED.THE INTEGRALSHANKFILTER
ASSEMBLY MUSTBERE-INSTALLEDAFTER SERVICINGTOENSUREPROPER FUNCTIONINGOFTHE METERINGCARTRIDGE.
Form# CF1060 Date: 12/20/11
C.N. No. 128445 Rev. G
ZURN INDUSTRIES, LLC.
♦♦
♦♦
♦ COMMERCIAL BRASS OPERATION
♦♦
♦♦
♦ 5900 ELWIN BUCHANAN DRIVE
♦♦
♦♦
♦ SANFORD NC 27330
Phone: [phone]
♦♦
♦♦
♦ Fax: [phone]
♦♦
♦♦
♦ World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED
♦♦
♦♦
♦ 3544 Nashua Drive
♦♦
♦♦
♦ Mississauga, Ontario L4V1L2
♦♦
♦♦
♦ Phone: [phone] Fax: [phone]

MAINTENANCE
1. YOUR ZURNAQUASPEC BUBBLER HASA HIGHLY POLISHED NICKELCHROME PLATED FINISH. CLEAN WITH SOAP
AND WATER ORAMILD CLEANER WHICH IS SAFE FOR CHROME PLATING. DO NOTUSEACIDS OR TOILET BOWL
CLEANERASTHEYWILLDAMAGETHE FINISH.
2. POPPETASSEMBLY(#3)REMOVALANDREPLACEMENT
2.1. REMOVE COLORED INDEX BUTTON (#1C) FROM HANDLE (#1A)
2.2. LOOSEN SET SCREW (#1B) IN HANDLE WITH 3/32” ALLEN WRENCH
2.3. PULLUP ON HANDLE TO REMOVE FROM STEM (#2C) OF HANDLE NUTASSEMBLY (#2)
2.4. REMOVE HANDLE NUTASSEMBLY (#2) USING 1-1/8” HEX 6-POINT SOCKET
2.5. REMOVE POPPETASSEMBLY(#3) BY LIFTING OUT OF BUBBLER BODY(#7). IT MAY BE NECESSARYTO OPEN
THE SUPPLY STOP SLIGHTLY TOALLOW WATER PRESSURE TO PUSH THE METERING CARTRIDGE UPWARD.
2.6 INSPECTPOPPETASSEMBLY(#3) FORWORN PARTS, DAMAGEDPARTSANDANYCONTAMINATIONTHATMAYBE
PREVENTINGTHEPOPPETASSEMBLY FROMMOVING FREELYOR SEATING. OTHERTHAN CLEANINGANY
TRAPPEDDEBRIS,THEREARE NO SERVICEABLE PARTS INTHE POPPETASSEMBLY.CONTAMINATEDOR
DAMAGED POPPET ASSEMBLIES SHOULD BE REPLACED.
2.7 REVERSE STEPS 1.1THROUGH 1.5 FOR RE-ASSEMBLY. POPPETASSEMBLY (#3) WILLSIT SLIGHTLYABOVE
BODY(#7) PRIOR TO MOUNTING OF HANDLE NUTASSEMBLY. TIGHTEN CAP (#2F) WITH 1-1/8” HEX 6-POINT
SOCKETUNTILNO WATER IS LEAKING FROM UNDER THE HANDLE NUTASSEMBLY WHEN THE BUBBLER IS
RUNNING. HOLD DOWN HANDLE (#1) WHILE TIGHTENING SET SCREW (#1B) TO ENSURE PROPER SEATING
3. IT MAYBE NECESSARY TO REPLACE OR BACK FLUSH THE IN-LINE SHANK FILTER PERIODICALLYTO REMOVE
COLLECTED SEDIMENTAND DEBRIS.THE IN-LINE SHANK FILTER (#6) MAY BE REMOVED USINGA1/4”ALLEN
WRENCH.
1. ROTATE FLOW CONTROL (#8) WITH 5/32 ALLEN WRENCH UNTILTHE DESIRED FLOW IS ACHIEVED
ADJUSTING THE FLOW ON ZURN BUBBLER
PAGE 2OF3
REPLACEMENTPARTS
HANDLENUTASSEMBLY G60561
POPPET ASSEMBLY G62682
HANDLEASSEMBLY G60522
FILTERASSEMBLY G67787
Metering Faucet Trouble Shooting Guide
Problem Cause Solution
No water is coming out
bubbler & all supply
stops are on.
Shut off water. Remove filter assembly
(#6) from lavatory supply stop and rinse
debris from filter. Replace filter assembly
and turn on water to bubbler.
Cloggedfilter assembly.
Bubbler will not shut off. Cartridge is damaged. Replace metering
cartridge G62682
Form# CF1060 Date: 12/20/11
C.N. No. 128445 Rev. G

Z83600PICTURED
PAGE 3OF3
Item Part Number Description Qty. Item Part Number Description Qty.
1 G60522 Metering HandleAssembly 1
1A 60601003 Metering Handle 1
1B 62705001 Set Screw 1
1C G60558 MeteringIndexButtonsH,C,T 1
60460001 Hot Index 1
60460002 Cold Index 1
60460003 Tempered Index 1
2 G60561 Handle NutAssembly 1
2A 60465001 Retaining ‘E’ Ring 1
2B 60450001 Spring Seat 1
2C 60451003 Stem 1
2D 60447001 Return Spring 1
2E 60446001 Adjustment Nut 1
2F 60452001 Cap 1
2G 60456001 Stem Housing 1
2H 62499107 O-Ring 1
2I 60458001 O-Ring Retainer 1
3 G62682 PoppetAssembly w/Sleeve 1
4 92332001 BubblerAdapter 1
5 92209001 Flexible Mouth Guard 1
6 G67787 FilterAssembly 1
7 61697001 Body 1
8 92333002 Flow Control 1
9 62916001 Gasket 1
10 62915001 Retainer Nut 1
11 G63367 Mounting Hardware 1
11A 60549001 Gasket 1
11B 61613019 Lock Washer 1
11C 59530002 Mounting Nut 1
11D 59532001 1/2” NPSM Riser Nut 1
12 G65503 Cap Sealing WasherAss’y. 1
12A 65431002 Plastic Ring 1
12B 65432001 O-Ring 1
Form# CF1060 Date: 12/20/11
C.N. No. 128445 Rev. G