ZURN AQUASPEC Z82600 SERIES User manual

MAINTENANCE
1. YOURZURNAQUASPECFAUCETHASAHIGHLYPOLISHEDNICKELCHROME PLATEDFINISH. CLEANWITHSOAP AND
WATER ORAMILD CLEANER WHICH IS SAFE FOR CHROME PLATING. DO NOT USEACIDS OR TOILET BOWLCLEANER
ASTHEYWILLDAMAGE THE FINISH.
2. AQUASPEC FAUCETS CONTAINCERAMICDISKCARTRIDGES WHICH REQUIRE NO MAINTENANCE. TO REMOVETHE
CARTRIDGE SHUT THE WATER OFF, LOOSEN THE HANDLE NUTSAND PULL OUT ON THE CARTRIDGE.
INSTALLATIONINSTRUCTIONS
1. REMOVEFAUCET BODYFROMCARTONANDINSTALLFRICTIONGASKET(ITEM #5A) ON SHANK.
2. OPTIONALANTI-ROTATION PIN (-AR), THREADANTI-ROTATION PIN INTOTHETHREADED HOLE ONTHEUNDER
SIDEOFTHE DOUBLE LAB BODY. SEE PAGE 2 FOR ROUGH-IN DIMENSIONSTOACCOMODATE THE (-AR) OPTION.
3. PLACE FAUCET ON SINKAND SECURE WITH WASHER (ITEM #5B) AND MOUNTING NUT(ITEM #5C).
4. TIGHTENMOUNTINGNUTFROM UNDER SINK. MAKE SURE FAUCETISCENTEREDPROPERLY. DO NOT OVER
TIGHTEN.
5. INSTALLSPOUTINTOBASEANDTIGHTENNUT(SEE VIEWS FOR SWING/RIGID CONNECTION).
6. ATTACHFLEXHOSELAVATORYSUPPLIES(ITEM#6)TOFAUCET.
7. OPTIONALGRIDSTRAINER(-G)/HANDICAPOFFSETGRIDDRAIN(-GH)
INSTALLGRID STRAINER IN SINK OUTLETAND PLUMB WASTE CONNECTION.
8. TURN WATER SUPPLYONAND OPERATE FAUCET CHECKING FOR LEAKS.
9. ITMAYBENECESSARYTOSHUTWATER OFFAND REMOVE CARTRIDGESTOCLEANSUPPLYLINES. CARTRIDGES
CANBEREMOVEDBYFIRSTREMOVINGTHEHANDLES. COLORINDEXESCANBEREMOVEDBYINSERTINGAPIN
INTOTHE HOLE ONTHE UNDERSIDE OF THE HANDLE. AFTER THE HANDLES HAVE BEEN REMOVED UNSCREW THE
HANDLE NUTS AND PULLOUT ONTHE CARTRIDGE. ZURN WILL SUPPLY HANDLE PORT
PLUGS (ZURN PART #61094001) AT YOUR REQUEST.
10. REPLACE CARTRIDGES IN BODYAND HAND TIGHTEN HANDLE NUTS. PLACE HANDLES ONTHE CARTRIDGE STEM
AND LOCATE THEMAS DESIRED. TIGHTEN HANDLE NUT.
11. REPLACE HANDLE SCREWS AND COLOR INDEX BUTTONS.
12. INSTALLAERATOR INTO FAUCETAND HANDTIGHTEN. IT MAYBE NECESSARYTOUNSCREWAND CLEANAERATORAT
START-UP.
SHT 1 OF 2
AQUASPEC FAUCETS
MODEL - Z82600 SERIES
SINGLE HOLE, DOUBLE LABORATORY FAUCET
TECHNICALINFORMATION
FLOW: 2.2 GPM[8.3L] PRESSURECOMPENSATINGAERATOR*
MAXIMUM PRESSURE: 125 PSI
MAXIMUMTEMPERATURE: 180OFF
HANDLE NUT TORQUE: 15-20FT- LBS.
CARTRIDGESTYLE: QUARTERTURNCERAMICDISK
* OTHER AERATORS AVAILABLE BY REQUEST
Form# CF100 Date: 1/29/07
C.N. No. 105622 Rev.H

Form# CF100 Date: 1/29/07
C.N. No. 105622 Rev.H
ITEM QTY
1 60822002 DOUBLE LABBODY 1
2 59517001 SHORTCOLDCARTRIDGE 1
3 59517002 SHORTHOTCARTRIDGE 1
4 59523001 HANDLENUT 2
5 G61073 MOUNTINGHARDWARE 1
Z826A1PICTURED
Z82600PARTS LIST
ITEM QTY
5A 60549002 FRICTIONGASKET 1
5B 60444002 WASHER 1
5C 60445002 MOUNTINGNUT 1
6 G66621 S.S.BRAIDEDFLEX HOSES 1
AquaSpec®is a registered trademark of Zurn Industries, Inc.
©2007 Zurn Industries, Inc.
ZURN INDUSTRIES, INC. ♦♦
♦♦
♦COMMERCIAL BRASS OPERATION ♦♦
♦♦
♦2640 SOUTH WORK STREET ♦♦
♦♦
♦FALCONER NY 14733
Phone: [phone] ♦♦
♦♦
♦Fax: [phone] ♦♦
♦♦
♦World Wide Web: www.zurn.com
In Canada: ZURN INDUSTRIES LIMITED ♦♦
♦♦
♦3544 Nashua Drive ♦♦
♦♦
♦Mississauga, Ontario L4V1L2 ♦♦
♦♦
♦Phone: [phone] Fax: [phone]
SHT 2 OF 2
REPLACEMENTPARTS
COLD WATER CARTRIDGE 59517001
HOTWATER CARTRIDGE 59517002
INDEXBUTTONS G60500