ZURN ZSHIELD Z1072 User manual

Z1072
ZSHIELD™BARRIERTRAPINSTALLATIONINSTRUCTIONS
Zurn Industries, LLC |Specification Drainage Operation
1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax [phone]
In Canada |Zurn Industries Limited
3544 Nashua Drive, Mississauga, Ontario L4V 1L2 · Ph. 905-405-8272, Fax [phone]
www.zurn.com
Rev. B
Date: 11/19/2018
C.N. No. 140861
Form No. FD95 Page 1 of 2
Fig. 1
Z1072 ZSHIELDTM can be installed in Extra Heavy Cast Iron Soil
Pipe, Hubless Cast Iron Soil Pipe, PVC Drain, Waste and Vent
Pipe, PVC Schedule 40 Pipe and Service Cast Iron Soil Pipe.
For 2", 3" and 3.5" Retro-Fit Installation
4" Size can be Retro-Fit, if the -HD (4" Shank) top assembly was
installed
1. Remove screwsandstrainerfrominstalleddrain.
Make sure drain outlet is clear of any debris or obstructions prior to
installingtheZ1072.
2. Align Z1072 with the center of the drain assembly
3. Push Z1072 into bottom of drain body or outlet pipe until the
underside of the barrier trap is flush with bottom of drain or top of
the pipe. See Fig. 3)
If using the 3.5" barrier trap seal push the barrier trap down until the
underside of the barrier trap is flush with the shank of the strainer.
See Fig. 3a
Fig. 2
Fig. 3
Fig. 3a
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
ADVERTENCIA: Cáncer y daño reproductivo - www.P65Warnings.ca.gov
AVERTISSEMENT: Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov

Z1072
ZSHIELD™BARRIERTRAPINSTALLATIONINSTRUCTIONS
Zurn Industries, LLC |Specification Drainage Operation
1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax [phone]
In Canada |Zurn Industries Limited
3544 Nashua Drive, Mississauga, Ontario L4V 1L2 · Ph. 905-405-8272, Fax [phone]
www.zurn.com
Rev. B
Date: 11/19/2018
C.N. No. 140861
Form No. FD95 Page 2 of 2
Fig. 11
4.Makesurerubberseal wasn'tdamagedduringinstallation.
Verify rubber seal is smooth and flat.
5. Replace strainer and screws. Fig. 11.
For 2", 3" and 4" New Installation
Z1072 ZSHIELDTM can be installed in Extra Heavy Cast Iron
Soil Pipe, Hubless Cast Iron Soil Pipe, PVC Drain,
Waste and Vent Pipe, PVC Schedule 40 Pipe and
Service Cast Iron Soil Pipe.
6. ForIC,IGandNPToutlet connections,Align Z1072over
center of pipe. See Fig. 12.
ForNL or NH connections,AlignZ1072over center line of
drain body. See Fig. 12A
Make sure drain outlet or pipe is clear of any debris or
obstructionsprior to installing the Z1072.
7. For IC, IG and NPT outlet connections, make sure bottom of
Z1072 is flush with top of pipe. See Fig. 13.
For NL or NH connections, make sure bottom of Z1072 is
flush with the bottom of the drain body. See Fig. 13A
8. Finishdraininstallationpermanufacturersinstallation
instructions.
Fig. 13
Fig. 12
Fig.12a
Fig. 13a
Z1072 ZSHIELDTM shall not be used in lieu of a trap primer.