ZURN AQUASPEC Z-81100 SERIES User manual

Form#CF94 Date: 10/6/05
C.N. No. 103181 Rev.C
AQUASPEC FAUCETS
MODEL - Z-81100 SERIES
4” [102] CENTERSET
TECHNICALINFORMATION
FLOW: 2.0 GPM [7.6 L] PRESSURE COMPENSATINGAERATOR
MAXIMUM PRESSURE: 125 PSI
MAXIMUM TEMPERATURE: 180OFF
®
HANDLE NUT TORQUE: 15-20 FT-LBS
CARTRIDGE STYLE: QUARTER TURN CERAMIC DISK
*OTHER AERATORSAVAILABLE BY REQUEST
PAGE1 OF2
INSTALLATIONINSTRUCTIONS
1. REMOVEFAUCETBODYFROM CARTONANDAPPLYPLUMBERSPUTTYTOUNDERSIDEOF BODY.
2. PLACEFAUCETONSINKANDREMOVE PLASTIC MOUNTING NUTS(ITEM#5A) FROM BAG G60502.
3. HAND TIGHTEN PLASTIC MOUNTING NUTS FROM UNDER SINK. MAKE SURE FAUCET IS CENTERED PROPERLY.
DONOTOVERTIGHTEN.
4. ATTACH LAVATORYSUPPLIESTOFAUCETWITH RISER NUTS (ITEM#5B).
5. OPTIONAL: POP-UP (-P)
GRIDSTRAINER (-G)
ADAOFFSET GRIDDRAIN(-GH)
INSTALL POP-UP OR GRID STRAINER IN SINK OUTLETAND PLUMB WASTE CONNECTION.
6. TURNSUPPLYWATER ONAND OPERATE FAUCET CHECKING FOR LEAKS.
7. ITMAYBENECESSARYTOSHUT WATEROFFANDREMOVE CARTRIDGESTOCLEANSUPPLYLINES. CARTRIDGES
CANBE REMOVED BYFIRST REMOVINGTHE HANDLES. COLOR INDEXESCAN BE REMOVED BYINSERTINGAPININTO
THE HOLE ON THE UNDERSIDE OFTHE HANDLE. AFTER THE HANDLES HAVE BEEN REMOVED, UNSCREW THE
HANDLE NUTSAND PULL UP ON THE CARTRIDGE. ZURN WILL SUPPLY HANDLE PORT PLUGS (ZURN PART
#61094001)AT YOUR REQUEST.
8. REPLACE CARTRIDGES IN BODYAND HAND TIGHTEN HANDLE NUTS. PLACE HANDLES ON THE CARTRIDGE STEM
AND LOCATE THEMAS DESIRED. TIGHTEN HANDLE NUT TO 15-20 FT-LBS OF TORQUE.
9. REPLACE HANDLE SCREWS AND COLOR INDEX BUTTONS.
10.INSTALLAERATORINTOFAUCETAND HAND TIGHTEN.IT MAYBENECESSARYTOUNSCREWAND CLEANAERATORAT
START-UP.

ZURNINDUSTRIES,INC.
COMMERCIALBRASSOPERATIONS
2640 SOUTH WORK STREET
FALCONER, N.Y. 14733
PHONE: [phone] FAX: [phone]
WORLD WIDE WEB: www.zurn.com Form# CF94 Date: 10/6/05
C.N. No. 103181 Rev.C
PAGE 2 OF2
MAINTENANCE
1. YOUR ZURNAQUASPEC FAUCET HASAHIGHLY POLISHED NICKELCHROMEPLATED FINISH. CLEAN WITH SOAPAND
WATER ORAMILD CLEANER WHICH IS SAFE FOR CHROME PLATING. DO NOT USEACIDS OR TOILETBOWLCLEANER
ASTHEY WILLDAMAGE THE FINISH.
2. AQUASPECFAUCETS CONTAIN CERAMIC DISK CARTRIDGESWHICH REQUIRENO MAINTENANCE. TO REMOVETHE
CARTRIDGE, SHUTTHE WATER OFF, LOOSEN THE HANDLE NUTSAND PULLUP ON THE CARTRIDGE.
REPLACEMENTPARTS
COLD WATER CARTRIDGE 59517001
HOTWATERCARTRIDGE 59517002
INDEXBUTTONS G60500
ITEM QTY
1 59440001 HANDLENUT 2
2 59517001 SHORTCOLDCARTRIDGE 1
3 59517002 SHORTHOTCARTRIDGE 1
4 59461001 BODY 1
ITEM QTY
5 G60502 NUTS 1
5A 59530002 MOUNTINGNUT 2
5B 59532001 1/2”[13]NPSM RISERNUT 2
Z-81100PARTSLIST
Z-81101PICTURED